scholarly journals ‘Plug-and-Power’ Point-of-Care diagnostics: A novel approach for self-powered electronic reader-based portable analytical devices

2018 ◽  
Vol 118 ◽  
pp. 88-96 ◽  
Author(s):  
Yaiza Montes-Cebrián ◽  
Lorena del Torno-de Román ◽  
Albert Álvarez-Carulla ◽  
Jordi Colomer-Farrarons ◽  
Shelley D. Minteer ◽  
...  
Keyword(s):  
Point Of Care ◽  
Point Of Care Diagnostics ◽  
Novel Approach ◽  
Self Powered ◽  
Power Point

scholarly journals Triboelectric Effect Enabled Self-Powered, Point-of-Care Diagnostics: Opportunities for Developing ASSURED and REASSURED Devices

Micromachines ◽  
2021 ◽  
Vol 12 (3) ◽  
pp. 337
Author(s):  
Navneet Soin ◽  
Sam J. Fishlock ◽  
Colin Kelsey ◽  
Suzanne Smith
Keyword(s):  
High Efficiency ◽  
Resource Constraints ◽  
Point Of Care ◽  
Wearable Sensors ◽  
Middle Income ◽  
Physiological Signal ◽  
Point Of Care Diagnostics ◽  
Self Powered ◽  
Triboelectric Nanogenerators ◽  
Triboelectric Effect

The use of rapid point-of-care (PoC) diagnostics in conjunction with physiological signal monitoring has seen tremendous progress in their availability and uptake, particularly in low- and middle-income countries (LMICs). However, to truly overcome infrastructural and resource constraints, there is an urgent need for self-powered devices which can enable on-demand and/or continuous monitoring of patients. The past decade has seen the rapid rise of triboelectric nanogenerators (TENGs) as the choice for high-efficiency energy harvesting for developing self-powered systems as well as for use as sensors. This review provides an overview of the current state of the art of such wearable sensors and end-to-end solutions for physiological and biomarker monitoring. We further discuss the current constraints and bottlenecks of these devices and systems and provide an outlook on the development of TENG-enabled PoC/monitoring devices that could eventually meet criteria formulated specifically for use in LMICs.

scholarly journals Self-Powered Portable Electronic Reader for Point-of-Care Amperometric Measurements

Sensors ◽  
2019 ◽  
Vol 19 (17) ◽  
pp. 3715 ◽  
Author(s):  
Yaiza Montes-Cebrián ◽  
Albert Álvarez-Carulla ◽  
Jordi Colomer-Farrarons ◽  
Manel Puig-Vidal ◽  
Pere Ll. Miribel-Català
Keyword(s):  
Low Power ◽  
Point Of Care ◽  
Power Source ◽  
Laboratory Equipment ◽  
Fuel Concentration ◽  
Point Of Care Diagnostics ◽  
External Power Source ◽  
Wide Range ◽  
External Power ◽  
Self Powered

In this work, we present a self-powered electronic reader (e-reader) for point-of-care diagnostics based on the use of a fuel cell (FC) which works as a power source and as a sensor. The self-powered e-reader extracts the energy from the FC to supply the electronic components concomitantly, while performing the detection of the fuel concentration. The designed electronics rely on straightforward standards for low power consumption, resulting in a robust and low power device without needing an external power source. Besides, the custom electronic instrumentation platform can process and display fuel concentration without requiring any type of laboratory equipment. In this study, we present the electronics system in detail and describe all modules that make up the system. Furthermore, we validate the device’s operation with different emulated FCs and sensors presented in the literature. The e-reader can be adjusted to numerous current ranges up to 3 mA, with a 13 nA resolution and an uncertainty of 1.8%. Besides, it only consumes 900 µW in the low power mode of operation, and it can operate with a minimum voltage of 330 mV. This concept can be extended to a wide range of fields, from biomedical to environmental applications.

scholarly journals COVID-19 Point-of-Care Diagnostics: Present and Future

ACS Nano ◽  
2021 ◽  
Author(s):  
Enrique Valera ◽  
Aaron Jankelow ◽  
Jongwon Lim ◽  
Victoria Kindratenko ◽  
Anurup Ganguli ◽  
...  
Keyword(s):  
Point Of Care ◽  
Point Of Care Diagnostics

scholarly journals 145 Point of care lung ultrasound in patient triage: integration of ultrasound into a streaming pathway for COVID-19

2020 ◽  
Vol 37 (12) ◽  
pp. 839.1-839
Author(s):  
Dominic Craver ◽  
Aminah Ahmad ◽  
Anna Colclough
Keyword(s):  
Point Of Care ◽  
District General Hospital ◽  
Training Programme ◽  
Service Evaluation ◽  
University Hospital ◽  
Junior Doctors ◽  
Point Of Care Ultrasound ◽  
Face To Face ◽  
Point Of Care Diagnostics ◽  
Audit Data

Aims/Objectives/BackgroundRapid risk stratification of patients is vital for Emergency Department (ED) streaming during the COVID-19 pandemic. Ideally, patients should be split into red (suspected/confirmed COVID-19) and green (non COVID-19) zones in order to minimise the risk of patient-to-patient and patient-to-staff transmission. A robust yet rapid streaming system combining clinician impression with point-of-care diagnostics is therefore necessary.Point of care ultrasound (POCUS) findings in COVID-19 have been shown to correlate well with computed tomography (CT) findings, and it therefore has value as a front-door diagnostic tool. At University Hospital Lewisham (a district general hospital in south London), we recognised the value of early POCUS and its potential for use in patient streaming.Methods/DesignWe developed a training programme, ‘POCUS for COVID’ and subsequently integrated POCUS into streaming of our ED patients. The training involved Zoom lectures, a face to face practical, a 10 scan sign off process followed by a final triggered assessment. Patient outcomes were reviewed in conjunction with their scan reports.Results/ConclusionsCurrently, we have 21 ED junior doctors performing ultrasound scans independently, and all patients presenting to our department are scanned either in triage or in the ambulance. A combination of clinical judgement and scan findings are used to stream the patient to an appropriate area.Service evaluation with analysis of audit data has found our streaming to be 94% sensitive and 79% specific as an indicator of COVID 19. Further analysis is ongoing.Here we present both the structure of our training programme and our integrated streaming pathway along with preliminary analysis results.

scholarly journals Point of Care Diagnostics in the Age of COVID-19

Diagnostics ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 9
Author(s):  
Meysam Rezaei ◽  
Sajad Razavi Bazaz ◽  
Sareh Zhand ◽  
Nima Sayyadi ◽  
Dayong Jin ◽  
...  
Keyword(s):  
Point Of Care ◽  
Diagnostic Methods ◽  
Global Public Health ◽  
Current Standard ◽  
Healthcare Facilities ◽  
Major Threat ◽  
Point Of Care Diagnostics ◽  
Recent Outbreak ◽  
Control Virus ◽  
Biosafety Level

The recent outbreak of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and its associated serious respiratory disease, coronavirus disease 2019 (COVID-19), poses a major threat to global public health. Owing to the lack of vaccine and effective treatments, many countries have been overwhelmed with an exponential spread of the virus and surge in the number of confirmed COVID-19 cases. Current standard diagnostic methods are inadequate for widespread testing as they suffer from prolonged turn-around times (>12 h) and mostly rely on high-biosafety-level laboratories and well-trained technicians. Point-of-care (POC) tests have the potential to vastly improve healthcare in several ways, ranging from enabling earlier detection and easier monitoring of disease to reaching remote populations. In recent years, the field of POC diagnostics has improved markedly with the advent of micro- and nanotechnologies. Due to the COVID-19 pandemic, POC technologies have been rapidly innovated to address key limitations faced in existing standard diagnostic methods. This review summarizes and compares the latest available POC immunoassay, nucleic acid-based and clustered regularly interspaced short palindromic repeats- (CRISPR)-mediated tests for SARS-CoV-2 detection that we anticipate aiding healthcare facilities to control virus infection and prevent subsequent spread.

scholarly journals Pocket MUSE: an affordable, versatile and high-performance fluorescence microscope using a smartphone

2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Yehe Liu ◽  
Andrew M. Rollins ◽  
Richard M. Levenson ◽  
Farzad Fereidouni ◽  
Michael W. Jenkins
Keyword(s):  
High Performance ◽  
Point Of Care ◽  
Low Cost ◽  
Consumer Electronics ◽  
Practical Implementation ◽  
The Novel ◽  
Point Of Care Diagnostics ◽  
Optical Module ◽  
Optical Configuration ◽  
User Friendly

AbstractSmartphone microscopes can be useful tools for a broad range of imaging applications. This manuscript demonstrates the first practical implementation of Microscopy with Ultraviolet Surface Excitation (MUSE) in a compact smartphone microscope called Pocket MUSE, resulting in a remarkably effective design. Fabricated with parts from consumer electronics that are readily available at low cost, the small optical module attaches directly over the rear lens in a smartphone. It enables high-quality multichannel fluorescence microscopy with submicron resolution over a 10× equivalent field of view. In addition to the novel optical configuration, Pocket MUSE is compatible with a series of simple, portable, and user-friendly sample preparation strategies that can be directly implemented for various microscopy applications for point-of-care diagnostics, at-home health monitoring, plant biology, STEM education, environmental studies, etc.

scholarly journals Microfluidics-Based Plasmonic Biosensing System Based on Patterned Plasmonic Nanostructure Arrays

Micromachines ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 826
Author(s):  
Yanting Liu ◽  
Xuming Zhang
Keyword(s):  
Plasmon Resonance ◽  
Point Of Care ◽  
Simultaneous Detection ◽  
High Sensitivity ◽  
Microfluidic Chips ◽  
Label Free ◽  
Plasmonic Nanostructure ◽  
Point Of Care Diagnostics ◽  
Surface Enhanced Raman ◽  
Nanostructure Arrays

This review aims to summarize the recent advances and progress of plasmonic biosensors based on patterned plasmonic nanostructure arrays that are integrated with microfluidic chips for various biomedical detection applications. The plasmonic biosensors have made rapid progress in miniaturization sensors with greatly enhanced performance through the continuous advances in plasmon resonance techniques such as surface plasmon resonance (SPR) and localized SPR (LSPR)-based refractive index sensing, SPR imaging (SPRi), and surface-enhanced Raman scattering (SERS). Meanwhile, microfluidic integration promotes multiplexing opportunities for the plasmonic biosensors in the simultaneous detection of multiple analytes. Particularly, different types of microfluidic-integrated plasmonic biosensor systems based on versatile patterned plasmonic nanostructured arrays were reviewed comprehensively, including their methods and relevant typical works. The microfluidics-based plasmonic biosensors provide a high-throughput platform for the biochemical molecular analysis with the advantages such as ultra-high sensitivity, label-free, and real time performance; thus, they continue to benefit the existing and emerging applications of biomedical studies, chemical analyses, and point-of-care diagnostics.

scholarly journals Self-Powered Point-of-Care Device for Galvanic Cell-Based Sample Concentration Measurement

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2665
Author(s):  
Albert Álvarez-Carulla ◽  
Yaiza Montes-Cebrián ◽  
Jordi Colomer-Farrarons ◽  
Pere Lluís Miribel-Català
Keyword(s):  
Low Power ◽  
Point Of Care ◽  
Linear Sweep Voltammetry ◽  
Electronic System ◽  
Concentration Measurement ◽  
Galvanic Cell ◽  
Sample Concentration ◽  
Maximum Coefficient ◽  
Self Powered ◽  
Transfer Function Gain

A novel self-powered point-of-care low-power electronics approach for galvanic cell-based sample concentration measurement is presented. The electronic system harvests and senses at the same time from the single cell. The system implements a solution that is suitable in those scenarios where extreme low power is generated from the fuel cell. The proposed approach implements a capacitive-based method to perform a non-linear sweep voltammetry to the cell, but without the need to implement a potentiostat amplifier for that purpose. It provides a digital-user readable result without the need for external non-self-powered devices or instruments compared with other solutions. The system conception was validated for a particular case. The scenario consisted of the measurement of a NaCl solution as the electrolyte, which was related to the conductivity of the sample. The electronic reader continuously measured the current with a transfer function gain of 1.012 V mA−1. The overall system exhibited a maximum coefficient of variation of 6.1%, which was an improvement compared with the state-of-the-art. The proof of concept of this electronics system was validated with a maximum power consumption of 5.8 μW using commercial-off-the-self parts.

scholarly journals Implementation of Point-of-Care Diagnostics in Rural Primary Healthcare Clinics in South Africa: Perspectives of Key Stakeholders

Diagnostics ◽  
2017 ◽  
Vol 7 (1) ◽  
pp. 3 ◽  
Author(s):  
Tivani Mashamba-Thompson ◽  
Ngcwalisa Jama ◽  
Benn Sartorius ◽  
Paul Drain ◽  
Rowan Thompson
Keyword(s):  
South Africa ◽  
Primary Healthcare ◽  
Point Of Care ◽  
Point Of Care Diagnostics ◽  
Key Stakeholders ◽  
Primary Healthcare Clinics
Sign in / Sign up

Export Citation Format

Share Document