Effect of the composition of the mineralizing additive on the firing process and properties of dinas

Refractories ◽  
1975 ◽  
Vol 16 (7-8) ◽  
pp. 516-520
Author(s):  
V. D. Tsigler ◽  
I. F. Usatikov ◽  
R. F. Rud'
Author(s):  
B.S. Soroka ◽  
V.V. Horupa

Natural gas NG consumption in industry and energy of Ukraine, in recent years falls down as a result of the crisis in the country’s economy, to a certain extent due to the introduction of renewable energy sources along with alternative technologies, while in the utility sector the consumption of fuel gas flow rate enhancing because of an increase the number of consumers. The natural gas is mostly using by domestic purpose for heating of premises and for cooking. These items of the gas utilization in Ukraine are already exceeding the NG consumption in industry. Cooking is proceeding directly in the living quarters, those usually do not meet the requirements of the Ukrainian norms DBN for the ventilation procedures. NG use in household gas stoves is of great importance from the standpoint of controlling the emissions of harmful components of combustion products along with maintenance the satisfactory energy efficiency characteristics of NG using. The main environment pollutants when burning the natural gas in gas stoves are including the nitrogen oxides NOx (to a greater extent — highly toxic NO2 component), carbon oxide CO, formaldehyde CH2O as well as hydrocarbons (unburned UHC and polyaromatic PAH). An overview of environmental documents to control CO and NOx emissions in comparison with the proper norms by USA, EU, Russian Federation, Australia and China, has been completed. The modern designs of the burners for gas stoves are considered along with defining the main characteristics: heat power, the natural gas flow rate, diameter of gas orifice, diameter and spacing the firing openings and other parameters. The modern physical and chemical principles of gas combustion by means of atmospheric ejection burners of gas cookers have been analyzed from the standpoints of combustion process stabilization and of ensuring the stability of flares. Among the factors of the firing process destabilization within the framework of analysis above mentioned, the following forms of unstable combustion/flame unstabilities have been considered: flashback, blow out or flame lifting, and the appearance of flame yellow tips. Bibl. 37, Fig. 11, Tab. 7.


2020 ◽  
pp. 128-139
Author(s):  
M. Yu. Shumakher ◽  
V. V. Konovalov ◽  
A. P. Melnikov

Currently, the treatment of the bottomhole formation zone with acidic compositions is one of the most common methods to intensify the oil inflow. The use of various modified acid compositions increases the efficiency of acid treatments on the bottomhole formation zone. Acid compositions, including those containing hydrocarbon solvents, which contribute to more efficient removal of organic colmatants, affect the reaction rate of the reagent with the rock and processing equipment, change the reservoir properties, etc.The article presents the results of experimental studies, which are aimed at establishing the effect of the composition of hydrocarbon-containing acidic emulsions consisting of an aqueous solution of hydrochloric acid, toluene and Neonol AF 9-10 on their dispersed and rheological properties, as well as their efficiency in removing paraffin deposits.


Author(s):  
Daniel Ourinson ◽  
Gernot Emanuel ◽  
Kaveh Rahmanpour ◽  
Felix Ogiewa ◽  
Harald Muller ◽  
...  

1996 ◽  
Vol 63 (2) ◽  
pp. 200-202
Author(s):  
I. A. Bocharova ◽  
T. O. Bud'ko ◽  
É. V. Zaporozhets ◽  
L. I. Romanova ◽  
E. A. Tyavlovskaya

Sign in / Sign up

Export Citation Format

Share Document