Experimental flow analysis of three-dimensional separation zones in front of weirs

1974 ◽  
Vol 13 (1) ◽  
pp. 41-44
Author(s):  
B. E. Luzhanskii ◽  
V. P. Solntsev
Keyword(s):  
Flow Analysis ◽  
Three Dimensional ◽  
Separation Zones

A Three-Dimensional Viscous Transonic Inverse Design Method

2000 ◽  
Author(s):  
W. T. Tiow ◽  
M. Zangeneh
Keyword(s):  
Design Method ◽  
Flow Analysis ◽  
Three Dimensional ◽  
Viscous Effects ◽  
Flow Equations ◽  
Flow Solution ◽  
Turbomachinery Blades ◽  
A Cell ◽  
Inverse Design Method ◽  
Euler Solver

The development and application of a three-dimensional inverse methodology is presented for the design of turbomachinery blades. The method is based on the mass-averaged swirl, rV~θ distribution and computes the necessary blade changes directly from the discrepancies between the target and initial distributions. The flow solution and blade modification converge simultaneously giving the final blade geometry and the corresponding steady state flow solution. The flow analysis is performed using a cell-vertex finite volume time-marching algorithm employing the multistage Runge-Kutta integrator in conjunction with accelerating techniques (local time stepping and grid sequencing). To account for viscous effects, dissipative forces are included in the Euler solver using the log-law and mixing length models. The design method can be used with any existing solver solving the same flow equations without any modifications to the blade surface wall boundary condition. Validation of the method has been carried out using a transonic annular turbine nozzle and NASA rotor 67. Finally, the method is demonstrated on the re-design of the blades.

Generation of steady longitudinal vortices in hypersonic boundary layer

2013 ◽  
Vol 729 ◽  
pp. 702-731 ◽  
Author(s):  
A. I. Ruban ◽  
M. A. Kravtsova
Keyword(s):  
Boundary Layer ◽  
Flow Analysis ◽  
Three Dimensional ◽  
Viscosity Coefficient ◽  
Momentum Equation ◽  
The Body ◽  
Nonlinear Behaviour ◽  
Hypersonic Boundary Layer ◽  
Stagnation Temperature ◽  
Characteristic Distance

AbstractIn this paper we study the three-dimensional perturbations produced in a hypersonic boundary layer by a small wall roughness. The flow analysis is performed under the assumption that the Reynolds number, $R{e}_{0} = {\rho }_{\infty } {V}_{\infty } L/ {\mu }_{0} $, and Mach number, ${M}_{\infty } = {V}_{\infty } / {a}_{\infty } $, are large, but the hypersonic interaction parameter, $\chi = { M}_{\infty }^{2} R{ e}_{0}^{- 1/ 2} $, is small. Here ${V}_{\infty } $, ${\rho }_{\infty } $ and ${a}_{\infty } $ are the flow velocity, gas density and speed of sound in the free stream, ${\mu }_{0} $ is the dynamic viscosity coefficient at the ‘stagnation temperature’, and $L$ is the characteristic distance the boundary layer develops along the body surface before encountering a roughness. We choose the longitudinal and spanwise dimensions of the roughness to be $O({\chi }^{3/ 4} )$ quantities. In this case the flow field around the roughness may be described in the framework of the hypersonic viscous–inviscid interaction theory, also known as the triple-deck model. Our main interest in this paper is the nonlinear behaviour of the perturbations. We study these by means of numerical solution of the triple-deck equations, for which purpose a modification of the ‘skewed shear’ technique suggested by Smith (United Technologies Research Center Tech. Rep. 83-46, 1983) has been used. The technique requires global iterations to adjust the viscous and inviscid parts of the flow. Convergence of such iterations is known to be a major problem in viscous–inviscid calculations. In order to achieve improved stability of the method, both the momentum equation for the viscous part of the flow, and the equations describing the interaction with the flow outside the boundary layer, are treated implicitly in this study. The calculations confirm the fact that in this sort of flow the perturbations are capable of propagating upstream in the boundary layer, resulting in a perturbation field which surrounds the roughness on all sides. We found that the perturbations decay rather fast with the distance from the roughness everywhere except in the wake behind the roughness. We found that if the height of the roughness is small, then the perturbations also decay in the wake, though much more slowly than outside the wake. However, if the roughness height exceeds some critical value, then two symmetric counter-rotating vortices form in the wake. They appear to support themselves and grow as the distance from the roughness increases.

Optimization of the Three-Dimensional Flow Path in the Scroll-Nozzle System of a Radial Inflow Turbine

1984 ◽  
Vol 106 (2) ◽  
pp. 511-515 ◽  
Author(s):  
E. A. Baskharone
Keyword(s):  
Flow Analysis ◽  
Three Dimensional ◽  
Inviscid Flow ◽  
Three Dimensional Flow ◽  
Multiply Connected ◽  
Dimensional Flow ◽  
Nozzle Configuration ◽  
Flow Domain ◽  
Radial Inflow Turbine ◽  
Compressibility Effects

A three-dimensional inviscid flow analysis in the combined scroll-nozzle system of a radial inflow turbine is presented. The coupling of the two turbine components leads to a geometrically complicated, multiply-connected flow domain. Nevertheless, this coupling accounts for the mutual effects of both elements on the three-dimensional flow pattern throughout the entire system. Compressibility effects are treated for an accurate prediction of the nozzle performance. Different geometrical configurations of both the scroll passage and the nozzle region are investigated for optimum performance. The results corresponding to a sample scroll-nozzle configuration are verified by experimental measurements.

Three-dimensional inviscid flow analysis of turbofan forced mixers

1985 ◽  
Author(s):  
T. BARBER ◽  
G. MULLER ◽  
S. RAMSAY ◽  
E. MURMAN
Keyword(s):  
Flow Analysis ◽  
Three Dimensional ◽  
Inviscid Flow

ELEMENT-FREE METHODS VS. MESH-LESS CAE

2006 ◽  
Vol 03 (04) ◽  
pp. 445-464 ◽  
Author(s):  
HIDEYUKI SAKURAI
Keyword(s):  
Mesh Generation ◽  
Flow Analysis ◽  
Three Dimensional ◽  
Generation Task ◽  
3D Objects ◽  
Computer Aided ◽  
Analysis System ◽  
Mesh Less ◽  
Element Free ◽  
Cae System

Element-free methods (EFreeMs) are expected to eliminate the mesh generation task. However, a computer aided engineering (CAE) system by EFreeM for complex three-dimensional (3D) objects has not yet been developed. This paper discusses the obstacles to the CAE and way to solve them. A 3D groundwater flow analysis system with an EFreeM is presented as a practical CAE. In the system, instead of pursuing mesh-less CAE, a unique mesh is employed to achieve the practical CAE. Some 3D examples show the performance and usefulness of the system. Two serious drawbacks of the EFreeM are also discussed from the viewpoint of the practical CAE.

A 3D Unsteady Flow Analysis in a Doubly Constricted Tube

2000 ◽  
Author(s):  
B. V. Rathish Kumar ◽  
T. Yamaguchi ◽  
H. Liu ◽  
R. Himeno
Keyword(s):  
Pressure Drop ◽  
Unsteady Flow ◽  
Stokes Equations ◽  
Vortex Formation ◽  
Flow Analysis ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
In Series ◽  
3D Unsteady Flow

Abstract Unsteady flow dynamics in a doubly constricted vessel is analyzed by using a time accurate Finite Volume solution of three dimensional incompressible Navier-Stokes equations. Computational experiments are carried out for various values of Reynolds number in order to assess the criticality of multiple mild constrictions in series and also to bring out the subtle 3D features like vortex formation. Studies reveal that pressure drop across a series of mild constrictions can get physiologically critical. Further this pressure drop is found to be sensitive to the spacing between the constrictions and also to the oscillatory nature of the inflow profile.

scholarly journals Investigation of Flow Behavior around Corotating Blades in a Double-Spindle Lawn Mower Deck

2005 ◽  
Vol 2005 (1) ◽  
pp. 77-89 ◽  
Author(s):  
W. Chon ◽  
R. S. Amano
Keyword(s):  
Flow Pattern ◽  
High Speed ◽  
Flow Behavior ◽  
Flow Analysis ◽  
Experimental Studies ◽  
Three Dimensional ◽  
Video Camera ◽  
Sound Level ◽  
Lawn Mower ◽  
Level Meter

When the airflow patterns inside a lawn mower deck are understood, the deck can be redesigned to be efficient and have an increased cutting ability. To learn more, a combination of computational and experimental studies was performed to investigate the effects of blade and housing designs on a flow pattern inside a1.1mwide corotating double-spindle lawn mower deck with side discharge. For the experimental portion of the study, air velocities inside the deck were measured using a laser Doppler velocimetry (LDV) system. A high-speed video camera was used to observe the flow pattern. Furthermore, noise levels were measured using a sound level meter. For the computational fluid dynamics (CFD) work, several arbitrary radial sections of a two-dimensional blade were selected to study flow computations. A three-dimensional, full deck model was also developed for realistic flow analysis. The computational results were then compared with the experimental results.

Sign in / Sign up

Export Citation Format

Share Document