Structural features of highly oriented reinforcing fibers and their effect on the maximum mechanical properties

1987 ◽  
Vol 23 (3) ◽  
pp. 259-265
Author(s):  
K. E. Perepelkin
Keyword(s):  
Mechanical Properties ◽  
Structural Features ◽  
Reinforcing Fibers

Structural features and strength behavior of TRIP/TWIP steels

2020 ◽  
pp. 5-18
Author(s):  
D. V. Prosvirnin ◽  
◽  
M. S. Larionov ◽  
S. V. Pivovarchik ◽  
A. G. Kolmakov ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Chemical Composition ◽  
Thermomechanical Processing ◽  
Maximum Load ◽  
Structural Features ◽  
Stacking Fault ◽  
Stacking Fault Energy ◽  
Structural And Functional Properties ◽  
Twip Steels ◽  
The Creation

A review of the literature data on the structural features of TRIP / TWIP steels, their relationship with mechanical properties and the relationship of strength parameters under static and cyclic loading was carried out. It is shown that the level of mechanical properties of such steels is determined by the chemical composition and processing technology (thermal and thermomechanical processing, hot and cold pressure treatment), aimed at achieving a favorable phase composition. At the atomic level, the most important factor is stacking fault energy, the level of which will be decisive in the formation of austenite twins and / or the formation of strain martensite. By selecting the chemical composition, it is possible to set the stacking fault energy corresponding to the necessary mechanical characteristics. In the case of cyclic loads, an important role is played by the strain rate and the maximum load during testing. So at high loading rates and a load approaching the yield strength under tension, the intensity of the twinning processes and the formation of martensite increases. It is shown that one of the relevant ways to further increase of the structural and functional properties of TRIP and TWIP steels is the creation of composite materials on their basis. At present, surface modification and coating, especially by ion-vacuum methods, can be considered the most promising direction for the creation of such composites.

Preparation and Mechanical Properties of Polyethylene-Portland Cement Composites

2009 ◽  
Vol 1242 ◽  
Author(s):  
Rivas-Vázquez L.P. ◽  
Suárez-Orduña R. ◽  
Valera-Zaragoza M. ◽  
Máas-Díaz A. De la L. ◽  
Ramírez-Vargas E.
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Portland Cement ◽  
Plastic Waste ◽  
Cement Composites ◽  
Compression Tests ◽  
Standard Samples ◽  
Cement Ratio ◽  
Reinforcing Fibers ◽  
Waste Polyethylene

ABSTRACTThe effects of waste polyethylene aggregate as admixture agent in Portland cement at different addition polyethylene/cement ratios from 0.0156 to 0.3903 were investigated. The reinforced samples were prepared according the ASTM C 150 Standard (samples of 5 × 5 × 5 cm). The reinforcing fibers were milling at a size of 1/25 in diameter, form waste and used them to evaluate the effects in mechanical properties in cement-based composites. The evaluation of polyethylene as additive was based on results of density and compression tests. The 28-day compressive strength of cement reforced with plastic waste at a replacement polyethylene/cement ratio of 0.0468 was 23.5 MPa compared to the control concrete (7.5 MPa). The density of cement replaced with polyethylene varies from 2.114 (0% polyethylene) to 1.83 g/cm3 by the influence of polyethylene.

Correlation between structural features and mechanical properties of boron nitride fibres derived from alkylaminoborazines

2005 ◽  
Vol 25 (2-3) ◽  
pp. 157-162 ◽  
Author(s):  
Philippe Miele ◽  
Bérangère Toury ◽  
Fernand Chassagneux ◽  
René Fulchiron
Keyword(s):  
Mechanical Properties ◽  
Boron Nitride ◽  
Structural Features

Computational Design and Optimization of Nerve Guidance Conduits for Improved Mechanical Properties and Permeability

2019 ◽  
Vol 141 (5) ◽  
Author(s):  
Shuo Zhang ◽  
Sanjairaj Vijayavenkataraman ◽  
Geng Liang Chong ◽  
Jerry Ying Hsi Fuh ◽  
Wen Feng Lu
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Mechanical Strength ◽  
Tensile Modulus ◽  
Computational Design ◽  
Structural Features ◽  
Nerve Tissue ◽  
High Porosity ◽  
Engineering Research ◽  
Design And Optimization

Nerve guidance conduits (NGCs) are tubular tissue engineering scaffolds used for nerve regeneration. The poor mechanical properties and porosity have always compromised their performances for guiding and supporting axonal growth. Therefore, in order to improve the properties of NGCs, the computational design approach was adopted to investigate the effects of different NGC structural features on their various properties, and finally, design an ideal NGC with mechanical properties matching human nerves and high porosity and permeability. Three common NGC designs, namely hollow luminal, multichannel, and microgrooved, were chosen in this study. Simulations were conducted to study the mechanical properties and permeability. The results show that pore size is the most influential structural feature for NGC tensile modulus. Multichannel NGCs have higher mechanical strength but lower permeability compared to other designs. Square pores lead to higher permeability but lower mechanical strength than circular pores. The study finally selected an optimized hollow luminal NGC with a porosity of 71% and a tensile modulus of 8 MPa to achieve multiple design requirements. The use of computational design and optimization was shown to be promising in future NGC design and nerve tissue engineering research.

scholarly journals Free Vibrations of Sandwich Plates with Damaged Soft-Core and Non-Uniform Mechanical Properties: Modeling and Finite Element Analysis

Materials ◽  
2019 ◽  
Vol 12 (15) ◽  
pp. 2444 ◽  
Author(s):  
Michele Bacciocchi ◽  
Raimondo Luciano ◽  
Carmelo Majorana ◽  
Angelo Marcello Tarantino
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Thickness Distribution ◽  
Free Vibrations ◽  
Soft Core ◽  
Sandwich Plates ◽  
Element Analysis ◽  
Three Phase ◽  
Reinforcing Fibers ◽  
Parametric Analyses

The paper aims to investigate the natural frequencies of sandwich plates by means of a Finite Element (FE) formulation based on the Reissner-Mindlin Zig-zag (RMZ) theory. The structures are made of a damaged isotropic soft-core and two external stiffer orthotropic face-sheets. These skins are strengthened at the nanoscale level by randomly oriented Carbon nanotubes (CNTs) and are reinforced at the microscale stage by oriented straight fibers. These reinforcing phases are included in a polymer matrix and a three-phase approach based on the Eshelby-Mori-Tanaka scheme and on the Halpin-Tsai approach, which is developed to compute the overall mechanical properties of the composite material. A non-uniform distribution of the reinforcing fibers is assumed along the thickness of the skin and is modeled analytically by means of peculiar expressions given as a function of the thickness coordinate. Several parametric analyses are carried out to investigate the mechanical behavior of these multi-layered structures depending on the damage features, through-the-thickness distribution of the straight fibers, stacking sequence, and mass fraction of the constituents. Some final remarks are presented to provide useful observations and design criteria.

QSPR STUDY OF RHEOLOGICAL AND MECHANICAL PROPERTIES OF CHLOROPRENE RUBBER ACCELERATORS

2014 ◽  
Vol 87 (2) ◽  
pp. 219-238 ◽  
Author(s):  
Roberto Todeschini ◽  
Viviana Consonni ◽  
Davide Ballabio ◽  
Andrea Mauri ◽  
Matteo Cassotti ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Mathematical Models ◽  
Structural Features ◽  
Structure Property ◽  
Structure Property Relationships ◽  
Quantitative Structure Property Relationships ◽  
Cure Time ◽  
Chloroprene Rubber ◽  
Experimental Values ◽  
Rubber Accelerators

ABSTRACT In this preliminary study, mathematical models based on Quantitative Structure Property Relationships (QSPR) were applied in order to analyze how molecular structure of chloroprene rubber accelerators relates to their rheological and mechanical properties. QSPR models were developed in order to disclose which structural features mainly affect the mechanism of vulcanization. In such a way QSPR can help in a faster and more parsimonious design of new chloroprene rubber curative molecules. Regression mathematical models were calibrated on two rheological properties (scorch time and optimum cure time) and three mechanical properties (modulus 100%, hardness, and elongation at break). Models were calculated using experimental values of 14 accelerators belonging to diverse chemical classes and validated by means of different strategies. All the derived models gave a good degree of fitting (R2 values ranging from 84.5 to 98.7) and a satisfactory predictive power. Moreover, some hypotheses on the correlations between specific structural features and the analyzed rheological and mechanical properties were drawn. Owing to the relatively small set of accelerators used to calibrate the models, these hypotheses should be further investigated and proved.

scholarly journals Energy localization and frequency analysis in the locust ear

2014 ◽  
Vol 11 (90) ◽  
pp. 20130857 ◽  
Author(s):  
Robert Malkin ◽  
Thomas R. McDonagh ◽  
Natasha Mhatre ◽  
Thomas S. Scott ◽  
Daniel Robert
Keyword(s):  
Mechanical Properties ◽  
Signal Analysis ◽  
Structural Features ◽  
Dependent Manner ◽  
Sound Waves ◽  
Energy Localization ◽  
Frequency Signal ◽  
Element Analysis ◽  
Frequency Dependent ◽  
Necessary And Sufficient

Animal ears are exquisitely adapted to capture sound energy and perform signal analysis. Studying the ear of the locust, we show how frequency signal analysis can be performed solely by using the structural features of the tympanum. Incident sound waves generate mechanical vibrational waves that travel across the tympanum. These waves shoal in a tsunami-like fashion, resulting in energy localization that focuses vibrations onto the mechanosensory neurons in a frequency-dependent manner. Using finite element analysis, we demonstrate that two mechanical properties of the locust tympanum, distributed thickness and tension, are necessary and sufficient to generate frequency-dependent energy localization.

Interface Effects on the Mechanical Properties of Nanocrystalline Nanolaminates

2009 ◽  
Vol 1224 ◽  
Author(s):  
Alan F. Jankowski
Keyword(s):  
Mechanical Properties ◽  
Plastic Deformation ◽  
Grain Size ◽  
Physical Vapor Deposition ◽  
Interfacial Area ◽  
Structural Features ◽  
Industrial Applications ◽  
Interfacial Structure ◽  
Average Width ◽  
Layer Spacing

AbstractNanocrystalline nanolaminate (ncnl) structures are widely used in the study of physical properties in order to engineer materials for a variety of industrial applications. Often, novel and interesting mechanical behaviours that are found in nanolaminate materials can be linked with two characteristic features of structure. These are the layer pair spacing and the grain size. For the case of nanolaminates synthesized by physical vapor deposition processes, the layer spacing corresponds with the repeating sequence of layer pairs and can be referred to as composition wavelength. The grain size is the average width of the tapered columnar structure along the growth direction. Since the mechanical properties of strength and hardness are known to functionally vary with the separation between dislocations in crystalline materials, both structural features can potentially contribute to the total interfacial area and the characteristic separation of interfaces that mitigate dislocation motion. In this investigation, the individual contribution of layer pair spacing and grain size to the total interfacial structure are each quantified in an assessment of strength and hardness. A model is proposed for the total interfacial area of the material volume under plastic deformation that can quantify the interfacial area contribution from the layer pairs and the grain size. It is anticipated that each structural feature can potentially dominate the plastic deformation of the nanolaminate as dependent upon the specific layer pair spacing, the grain size, and the extent of plastic deformation.

Sign in / Sign up

Export Citation Format

Share Document