Densification of sandwich-type reinforced materials in hot pressing

1973 ◽  
Vol 12 (7) ◽  
pp. 551-557 ◽  
Author(s):  
D. M. Karpinos ◽  
L. I. Tuchinskii ◽  
V. Ya. Fefer
Keyword(s):  
Hot Pressing ◽  
Sandwich Type ◽  
Reinforced Materials

Densification kinetics of sandwich-type reinforced materials in hot pressing

1972 ◽  
Vol 11 (1) ◽  
pp. 22-27
Author(s):  
D. M. Karpinos ◽  
L. I. Tuchinskii ◽  
V. Ya. Fefer
Keyword(s):  
Hot Pressing ◽  
Sandwich Type ◽  
Kinetics Of ◽  
Reinforced Materials

Microstructure of mechanically alloyed and hot-pressed Al5CuZr2

1990 ◽  
Vol 48 (4) ◽  
pp. 970-971
Author(s):  
T. E. Mitchell ◽  
P. B. Desch ◽  
R. B. Schwarz
Keyword(s):  
Mechanical Alloying ◽  
Vickers Hardness ◽  
Hot Pressing ◽  
Rapid Quenching ◽  
Hardened Steel ◽  
Alloyed Powder ◽  
Ion Milling ◽  
Mechanical Grinding ◽  
Mechanically Alloyed ◽  
Steel Container

Al3Zr has the highest melting temperature (1580°C) among the tri-aluminide intermetal1ics. When prepared by casting, Al3Zr forms in the tetragonal DO23 structure but by rapid quenching or by mechanical alloying (MA) it can also be prepared in the metastable cubic L12 structure. The L12 structure can be stabilized to at least 1300°C by the addition of copper and other elements. We report a TEM study of the microstructure of bulk Al5CuZr2 prepared by hot pressing mechanically alloyed powder.MA was performed in a Spex 800 mixer using a hardened steel container and balls and adding hexane as a surfactant. Between 1.4 and 2.4 wt.% of the hexane decomposed during MA and was incorporated into the alloy. The mechanically alloyed powders were degassed in vacuum at 900°C. They were compacted in a ram press at 900°C into fully dense samples having Vickers hardness of 1025. TEM specimens were prepared by mechanical grinding followed by ion milling at 120 K. TEM was performed on a Philips CM30 at 300kV.

Effect of hot pressing on the modulated structure of Zr0.98Sn0.02TiO4

1998 ◽  
Vol 77 (4) ◽  
pp. 1033-1037 ◽  
Author(s):  
Y. Park, S. A. Song H., G. Kim
Keyword(s):  
Hot Pressing ◽  
Modulated Structure

A Monoclonal Antibody-Based Enzyme Immunoassay for Fibrin Degradation Products in Plasma

1988 ◽  
Vol 59 (02) ◽  
pp. 310-315 ◽  
Author(s):  
P W Koppert ◽  
E Hoegee-de Nobel ◽  
W Nieuwenhuizen
Keyword(s):  
Enzyme Immunoassay ◽  
Degradation Products ◽  
Blood Clot ◽  
Tissue Type ◽  
Fibrin Degradation Products ◽  
Type Plasminogen Activator ◽  
Strong Positive Reaction ◽  
Sandwich Type ◽  
Capture Antibody

SummaryWe have developed a sandwich-type enzyme immunoassay (EIA) for the quantitation of fibrin degradation products (FbDP) in plasma with a time-to-result of only 45 minutes.* The assay is based on the combination of the specificities of two monoclonal antibodies (FDP-14 and DD-13), developed in our institute. FDP-14, the capture antibody, binds both fibrinogen degradation products (FbgDP) and FbDP, but does not react with the parent fibrin(ogen) molecules. It has its epitope in the E-domain of the fibrinogen molecule on the Bβ-chain between amino acids 54-118. Antibody DD-13 was raised using D-dimer as antigen and is used as a tagging antibody, conjugated with horse-radish peroxidase. A strong positive reaction is obtained with a whole blood clot lysate (lysis induced by tissue-type plasminogen activator) which is used as a standard. The EIA does virtually not detect FbgDP i. e. purified fragments X, Y, or FbgDP generated in vitro in plasma by streptokinase treatment. This indicates that the assay is specific for fibrin degradation products.We have successfully applied this assay to the plasma of patients with a variety of diseased states. In combination with the assay previously developed by us for FbgDP and for the total amount of FbgDP + FbDP (TDP) in plasma, we are now able to study the composition of TDP in patients plasma in terms of FbgDP and FbDP.

Spectrum of Defect States in Porous Organic Low-k Dielectric Films, Annealed in Argon and Nitrogen

2003 ◽  
Vol 766 ◽  
Author(s):  
V. Ligatchev ◽  
T.K.S. Wong ◽  
T.K. Goh ◽  
Rusli Suzhu Yu
Keyword(s):  
Deep Level ◽  
Dielectric Films ◽  
Silicon Substrates ◽  
Reverse Bias Voltage ◽  
Defect States ◽  
Single Side ◽  
Sandwich Type ◽  
Transient Spectroscopy ◽  
P Type ◽  
Spectrum Deconvolution

AbstractDefect spectrum N(E) of porous organic dielectric (POD) films is studied with capacitance deep-level-transient-spectroscopy (C-DLTS) in the energy range up to 0.7 eV below conduction band bottom Ec. The POD films were prepared by spin coating onto 200mm p-type (1 – 10 Δcm) single-side polished silicon substrates followed by baking at 325°C on a hot plate and curing at 425°C in furnace. The film thickness is in the 5000 – 6000 Å range. The ‘sandwich’ -type NiCr/POD/p-Si/NiCr test structures showed both rectifying DC current-voltage characteristics and linear 1/C2 vs. DC reverse bias voltage. These confirm the applicability of the C-DLTS technique for defect spectrum deconvolution and the n-type conductivity of the studied films. Isochronal annealing (30 min in argon or 60 min in nitrogen) has been performed over the temperature range 300°C - 650°C. The N(E) distribution is only slightly affected by annealing in argon. However, the distribution depends strongly on the annealing temperature in nitrogen ambient. A strong N(E) peak at Ec – E = 0.55 – 0.60 eV is detected in all samples annealed in argon but this peak is practically absent in samples annealed in nitrogen at Ta < 480°C. On the other hand, two new peaks at Ec – E = 0.12 and 0.20 eV appear in the N(E) spectrum of the samples annealed in nitrogen at Ta = 650°C. The different features of the defect spectrum are attributed to different interactions of argon and nitrogen with dangling carbon bonds on the intra-pore surfaces.

Wear Characteristics of Circular cBN/Diamond Saws Produced by Hot Pressing

2014 ◽  
Vol 56 (3) ◽  
pp. 213-217 ◽  
Author(s):  
Serkan Islak ◽  
Durmuş Kır ◽  
Halis Çelik
Keyword(s):  
Hot Pressing ◽  
Wear Characteristics
Sign in / Sign up

Export Citation Format

Share Document