Effect of processing parameters and graphite content on the tribological behaviour of 3D printed acrylonitrile butadiene styrene

2015 ◽  
Vol 46 (12) ◽  
pp. 1185-1195 ◽  
Author(s):  
M. Dawoud ◽  
I. Taha ◽  
S. J. Ebeid
Keyword(s):  
Acrylonitrile Butadiene Styrene ◽  
Processing Parameters ◽  
Tribological Behaviour ◽  
Graphite Content ◽  
3D Printed ◽  
Butadiene Styrene

scholarly journals Tribological Behaviour Comparison of ABS Polymer Manufactured Using Turning and 3D Printing

2019 ◽  
Vol 4 (1) ◽  
pp. 46-57
Author(s):  
Sharba Muammel M Hanon ◽  
M. Kovács ◽  
László Zsidai
Keyword(s):  
3D Printing ◽  
Acrylonitrile Butadiene Styrene ◽  
3D Printer ◽  
Dynamic Friction ◽  
Tribological Behaviour ◽  
Friction Factors ◽  
Subtractive Manufacturing ◽  
3D Printed ◽  
The Difference ◽  
Butadiene Styrene

Additive and subtractive manufacturing of Acrylonitrile Butadiene Styrene (ABS) were employed for fabricating samples. The Additive manufacturing was represented through 3D printing, whereas subtractive manufacturing carried out by Turning. Some developments have been applied for enhancing the performance of the 3D printer. Tribological measurements of the turned and 3D printed specimens have been achieved. Studying the difference between static and dynamic friction factors and the examination of wear values were included. A comparison of the tribological behaviour of the turned and 3D printed ABS polymer has been investigated.

scholarly journals Essential work of fracture assessment of acrylonitrile butadiene styrene (ABS) processed via fused filament fabrication additive manufacturing

2021 ◽  
Author(s):  
Pawan Verma ◽  
Jabir Ubaid ◽  
Andreas Schiffer ◽  
Atul Jain ◽  
Emilio Martínez-Pañeda ◽  
...  
Keyword(s):  
Acrylonitrile Butadiene Styrene ◽  
Essential Work ◽  
Fused Filament Fabrication ◽  
Essential Work Of Fracture ◽  
Fracture Properties ◽  
Raster Angle ◽  
3D Printed ◽  
Printing Direction ◽  
Work Of Fracture ◽  
Butadiene Styrene

AbstractExperiments and finite element (FE) calculations were performed to study the raster angle–dependent fracture behaviour of acrylonitrile butadiene styrene (ABS) thermoplastic processed via fused filament fabrication (FFF) additive manufacturing (AM). The fracture properties of 3D-printed ABS were characterized based on the concept of essential work of fracture (EWF), utilizing double-edge-notched tension (DENT) specimens considering rectilinear infill patterns with different raster angles (0°, 90° and + 45/− 45°). The measurements showed that the resistance to fracture initiation of 3D-printed ABS specimens is substantially higher for the printing direction perpendicular to the crack plane (0° raster angle) as compared to that of the samples wherein the printing direction is parallel to the crack (90° raster angle), reporting EWF values of 7.24 kJ m−2 and 3.61 kJ m−2, respectively. A relatively high EWF value was also reported for the specimens with + 45/− 45° raster angle (7.40 kJ m−2). Strain field analysis performed via digital image correlation showed that connected plastic zones existed in the ligaments of the DENT specimens prior to the onset of fracture, and this was corroborated by SEM fractography which showed that fracture proceeded by a ductile mechanism involving void growth and coalescence followed by drawing and ductile tearing of fibrils. It was further shown that the raster angle–dependent strength and fracture properties of 3D-printed ABS can be predicted with an acceptable accuracy by a relatively simple FE model considering the anisotropic elasticity and failure properties of FFF specimens. The findings of this study offer guidelines for fracture-resistant design of AM-enabled thermoplastics. Graphical abstract

scholarly journals Does vaporized hydrogen peroxide sterilization affect the geometrical properties of anatomic models and guides 3D printed from computed tomography images?

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Mauricio Toro ◽  
Aura Cardona ◽  
Daniel Restrepo ◽  
Laura Buitrago
Keyword(s):  
Computed Tomography ◽  
Hydrogen Peroxide ◽  
Dimensional Stability ◽  
Acrylonitrile Butadiene Styrene ◽  
Dimensional Error ◽  
Material Extrusion ◽  
Anatomic Models ◽  
3D Printed ◽  
Mean Differences ◽  
Butadiene Styrene

Abstract Background Material extrusion is used to 3D print anatomic models and guides. Sterilization is required if a 3D printed part touches the patient during an intervention. Vaporized Hydrogen Peroxide (VHP) is one method of sterilization. There are four factors to consider when sterilizing an anatomic model or guide: sterility, biocompatibility, mechanical properties, and geometric fidelity. This project focuses on geometric fidelity for material extrusion of one polymer acrylonitrile butadiene styrene (ABS) using VHP. Methods De-identified computed tomography (CT) image data from 16 patients was segmented using Mimics Innovation Suite (Materialise NV, Leuven, Belgium). Eight patients had maxillary and mandibular defects depicted with the anatomic models, and eight had mandibular defects for the anatomic guides. Anatomic models and guides designed from the surfaces of CT scan reconstruction and segementation were 3D printed in medical-grade acrylonitrile butadiene styrene (ABS) material extrusion. The 16 parts underwent low-temperature sterilization with VHP. The dimensional error was estimated after sterilization by comparing scanned images of the 3D printed parts. Results The average of the estimated mean differences between the printed pieces before and after sterilization were − 0,011 ± 0,252 mm (95%CI − 0,011; − 0,010) for the models and 0,003 ± 0,057 mm (95%CI 0,002; 0,003) for the guides. Regarding the dimensional error of the sterilized parts compared to the original design, the estimated mean differences were − 0,082 ± 0,626 mm (95%CI − 0,083; − 0,081) for the models and 0,126 ± 0,205 mm (95%CI 0,126, 0,127) for the guides. Conclusion This project tested and verified dimensional stability, one of the four prerequisites for introducing vaporized hydrogen peroxide into 3D printing of anatomic models and guides; the 3D printed parts maintained dimensional stability after sterilization.

Effect of Graphite Content on The Mechanical Properties of Acrylonitrile-Butadiene-Styrene (ABS)

2019 ◽  
Vol 383 (1) ◽  
pp. 1800018 ◽  
Author(s):  
Natália Ferreira Braga ◽  
Fabio Roberto Passador ◽  
Eduardo Saito ◽  
Fernando Henrique Cristovan
Keyword(s):  
Mechanical Properties ◽  
Acrylonitrile Butadiene Styrene ◽  
Graphite Content ◽  
Butadiene Styrene

Characterization of Acrylonitrile Butadiene Styrene for 3D Printed Patch Antenna

2017 ◽  
Vol 6 (1) ◽  
pp. 116 ◽  
Author(s):  
Norun Abdul Malek ◽  
Athirah Mohd Ramly ◽  
Atiah Sidek ◽  
Sarah Yasmin Mohamad
Keyword(s):  
Patch Antenna ◽  
Complex Geometry ◽  
Acrylonitrile Butadiene Styrene ◽  
Simulation Software ◽  
Tangent Loss ◽  
Time Saving ◽  
Conformal Antennas ◽  
Complex Design ◽  
3D Printed ◽  
Butadiene Styrene

<p>3D printing is one of the additive manufacturing technology that has gain popularity for time saving and complex design. This technology increases a degree of flexibility for potential 3D RF applications such as wearable and conformal antennas. This paper demonstrates a circular patch antenna fabricated on 3D printed Acrylonitrile Butadiene Styrene (ABS) filament. The main reason of using a 3D printer is that it is accurate, easy to fabricate of a complex geometry and the ability to create new antennas that cannot be made using conventional fabrication techniques. The ABS material has a tangent loss of 0.0051 and the relative permittivity is 2.74. The thickness of the substrate is 1.25 mm. The simulation has been performed using Computer Simulation Technology (CST). The return loss from simulation software is in good match with measurement which is 12.5dB at 2.44GHz. Hence, from the results obtained, the ABS could be used as a substrate for an antenna.</p>

scholarly journals Tribology behaviour investigation of 3D printed polymers

2019 ◽  
Vol 10 (2) ◽  
pp. 173-181
Author(s):  
Muammel M. Hanon ◽  
Márk Kovács ◽  
László Zsidai
Keyword(s):  
Acrylonitrile Butadiene Styrene ◽  
Poly Lactic Acid ◽  
Fused Deposition Modelling ◽  
Tribological Behaviour ◽  
Fused Deposition ◽  
Motion System ◽  
Friction Factors ◽  
The Coefficient Of Friction ◽  
3D Printed ◽  
The Difference

3D printing of Acrylonitrile Butadiene Styrene (ABS) and Poly Lactic Acid (PLA) were used to prepare specimens utilising fused deposition modelling (FDM) technology. Two colours of PLA filament were printed; white and grey, whereas ABS only in white colour. Determining the tribological properties of 3D printed samples have been carried out, through obtaining the frictional features of different 3D printable filaments. Alternating-motion system employed for measuring the tribological factors. Studying the difference between static and dynamic friction factors and the examination of wear values were included. A comparison among the tribological behaviour of the 3D printed polymers has been investigated. The printed white ABS and PLA specimens show insignificant differences in the results tendency. On the contrary, the grey PLA exhibits a considerable variation due to the incredible growth in the coefficient of friction and wear average as well.

Sign in / Sign up

Export Citation Format

Share Document