The morphology, rheological, and mechanical properties of wood flour/starch/poly(lactic acid) blends

2017 ◽  
Vol 134 (16) ◽  
Author(s):  
Shanshan Lv ◽  
Jiyou Gu ◽  
Haiyan Tan ◽  
Yanhua Zhang
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Wood Flour ◽  
Poly Lactic Acid

Mechanical properties of wood flour/poly (lactic acid) composites coupled with waterborne silane-polyacrylate copolymer emulsion

Holzforschung ◽  
2016 ◽  
Vol 70 (5) ◽  
pp. 439-447 ◽  
Author(s):  
Ru Liu ◽  
Shupin Luo ◽  
Jinzhen Cao ◽  
Yu Chen
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
High Performance ◽  
Coupling Effect ◽  
Wood Flour ◽  
Flexural Modulus ◽  
Coupling Agents ◽  
Poly Lactic Acid ◽  
Effective Coupling ◽  
Methacryloxypropyl Trimethoxysilane

Abstract Wood flour/polylactic acid (WF/PLA) composites were produced with a WF content of 50% based on three types of waterborne polyacrylate (PA) emulsions including a PA homopolymer emulsion and two types of silane-PA copolymer emulsions as coupling agents. Two silanes were in focus, namely, γ-methacryloxypropyl- trimethoxysilane (silane-1) and vinyltrimethoxysilane (silane-2). The emulsions and the modified WFs were characterized, and the effects were investigated in terms of emulsion type and their loading levels on the mechanical properties of WF/PLA composites. (1) Both types of silanes could be successfully copolymerized with PA to form stable emulsions. (2) With increasing PA loading, the mechanical properties (except for flexural modulus) of the composites increased at first before reaching the maximum values at 4% PA loading and then the properties worsened. However, these values were larger than those of pure composites, especially in cases when PA-silane emulsions were applied. (3) PA modified with silane-1 showed the best coupling effect among all the three PA emulsions. The results can be interpreted that PA emulsions are effective coupling agents for the preparation of high-performance WPCs.

scholarly journals Preparation of Organo-Montmorillonite Modified Poly(lactic acid) and Properties of Its Blends with Wood Flour

Polymers ◽  
2019 ◽  
Vol 11 (2) ◽  
pp. 204 ◽  
Author(s):  
Ru Liu ◽  
Xiaoqian Yin ◽  
Anmin Huang ◽  
Chen Wang ◽  
Erni Ma
Keyword(s):  
Mechanical Properties ◽  
Cell Wall ◽  
Lactic Acid ◽  
Wood Flour ◽  
Physical And Mechanical Properties ◽  
Poly Lactic Acid

In this study, poly(lactic acid) (PLA)/wood flour (WF) composites were prepared by first blending PLA with organo-montmorillonite (OMMT) at different contents (0.5, 1, 1.5, and 2 wt %). The physical and mechanical properties of the virgin and OMMT modified PLA and its WF composites were tested. The results showed that: (1) at low OMMT content (<1 wt %), OMMT can uniformly disperse into the PLA matrix with highly exfoliated structures. When the content increased to 1.5 wt %, some aggregations occurred; (2) after a second extruding process, the aggregated OMMT redistributed into PLA and part of OMMT even penetrated into the WF cell wall. However, at the highest OMMT content (2 wt %), aggregates still existed; (3) the highly exfoliated OMMT was beneficial to the physical and mechanical properties of PLA and the WF composites. The optimal group of OMMT-modified PLA was found at an OMMT content of 0.5 wt %, while for the PLA/WF system, the best properties were achieved at an OMMT content of 1.5 wt %.

Effect of Matrix–Particle Interfacial Adhesion on the Mechanical Properties of Poly(lactic acid)/Wood-Flour Micro-Composites

2009 ◽  
Vol 17 (2) ◽  
pp. 83-94 ◽  
Author(s):  
Eustathios Petinakis ◽  
Long Yu ◽  
Graham Edward ◽  
Katherine Dean ◽  
Hongsheng Liu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Interfacial Adhesion ◽  
Wood Flour ◽  
Poly Lactic Acid

scholarly journals Influence of Internal Innovative Architecture on the Mechanical Properties of 3D Polymer Printed Parts

Polymers ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 1129 ◽  
Author(s):  
Mihai Alin Pop ◽  
Cătălin Croitoru ◽  
Tibor Bedo ◽  
Virgil Geamăn ◽  
Irinel Radomir ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Lactic Acid ◽  
Wood Flour ◽  
Poly Lactic Acid ◽  
Fused Filament Fabrication ◽  
Strength Performance ◽  
Simple Support ◽  
3D Printed ◽  
Internal Architecture

The utilization of polymer-based materials is quickly expanding. The enterprises of today are progressively seeking techniques to supplant metal parts with polymer-based materials as a result of their light weight, simple support and modest costs. The ceaselessly developing requirement for composite materials with new or enhanced properties brings about the preparation of different polymer mixes with various arrangements, morphologies and properties. Fused filament fabrication processes such as 3D-printing are nowadays shaping the actual pathway to a full pallet of materials, from art–craft to biomaterials. In this study, the structural and mechanical behavior of three types of commercially available filaments comprised of synthetic poly(acrylonitrile-co-butadiene-co-styrene) (ABS), poly(lactic acid) (PLA) and poly(lactic acid)/polyhydroxyalkanoate reinforced with bamboo wood flour composite (PLA/PHA BambooFill) were assessed through mechanical testing and optical microscopy, aiming to understand how the modifications that occur in the printed models with internal architecture are influencing the mechanical properties of the 3D-printed material. It has been determined that the material printed from PLA presents the highest compression strength, three-point bending and shock resistance, while the ABS shows the best tensile strength performance. A probability plot was used to verify the normality hypothesis of data for the tensile strength, in conjunction with the Anderson–Darling statistic test. The results of the statistic indicated that the data were normally distributed and that there is a marked influence of the internal architecture of the 3D-printed models on the mechanical properties of the printed material.

Conductivity and mechanical properties of carbon black-reinforced poly(lactic acid) (PLA/CB) composites

2021 ◽  
Author(s):  
Jipeng Guo ◽  
Chi-Hui Tsou ◽  
Yongqi Yu ◽  
Chin-San Wu ◽  
Xuemei Zhang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Carbon Black ◽  
Poly Lactic Acid

scholarly journals A Review: Research Progress in Modification of Poly (Lactic Acid) by Lignin and Cellulose

Polymers ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 776
Author(s):  
Sixiang Zhai ◽  
Qingying Liu ◽  
Yuelong Zhao ◽  
Hui Sun ◽  
Biao Yang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Composite Materials ◽  
Crystallization Rate ◽  
Research Progress ◽  
Poly Lactic Acid ◽  
Green Composite ◽  
Materials Development ◽  
Research Attention ◽  
Biomass Components

With the depletion of petroleum energy, the possibility of prices of petroleum-based materials increasing, and increased environmental awareness, biodegradable materials as a kind of green alternative have attracted more and more research attention. In this context, poly (lactic acid) has shown a unique combination of properties such as nontoxicity, biodegradability, biocompatibility, and good workability. However, examples of its known drawbacks include poor tensile strength, low elongation at break, poor thermal properties, and low crystallization rate. Lignocellulosic materials such as lignin and cellulose have excellent biodegradability and mechanical properties. Compounding such biomass components with poly (lactic acid) is expected to prepare green composite materials with improved properties of poly (lactic acid). This paper is aimed at summarizing the research progress of modification of poly (lactic acid) with lignin and cellulose made in in recent years, with emphasis on effects of lignin and cellulose on mechanical properties, thermal stability and crystallinity on poly (lactic acid) composite materials. Development of poly (lactic acid) composite materials in this respect is forecasted.

scholarly journals Mechanical Properties and Bioactivity of Poly(Lactic Acid) Composites Containing Poly(Glycolic Acid) Fiber and Hydroxyapatite Particles

Nanomaterials ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 249
Author(s):  
Han-Seung Ko ◽  
Sangwoon Lee ◽  
Doyoung Lee ◽  
Jae Young Jho
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Flexural Strength ◽  
Interfacial Adhesion ◽  
Glycolic Acid ◽  
Compact Bone ◽  
Poly Lactic Acid ◽  
Coupling Reactions ◽  
The Poor ◽  
Human Compact Bone

To enhance the mechanical strength and bioactivity of poly(lactic acid) (PLA) to the level that can be used as a material for spinal implants, poly(glycolic acid) (PGA) fibers and hydroxyapatite (HA) were introduced as fillers to PLA composites. To improve the poor interface between HA and PLA, HA was grafted by PLA to form HA-g-PLA through coupling reactions, and mixed with PLA. The size of the HA particles in the PLA matrix was observed to be reduced from several micrometers to sub-micrometer by grafting PLA onto HA. The tensile and flexural strength of PLA/HA-g-PLA composites were increased compared with those of PLA/HA, apparently due to the better dispersion of HA and stronger interfacial adhesion between the HA and PLA matrix. We also examined the effects of the length and frequency of grafted PLA chains on the tensile strength of the composites. By the addition of unidirectionally aligned PGA fibers, the flexural strength of the composites was greatly improved to a level comparable with human compact bone. In the bioactivity tests, the growth of apatite on the surface was fastest and most uniform in the PLA/PGA fiber/HA-g-PLA composite.

scholarly journals Poly(Lactic Acid)–Poly(Butylene Succinate)–Sugar Beet Pulp Composites; Part I: Mechanics of Composites with Fine and Coarse Sugar Beet Pulp Particles

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2531
Author(s):  
Rodion Kopitzky
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Sugar Beet ◽  
Cell Structure ◽  
Sugar Beet Pulp ◽  
Poly Lactic Acid ◽  
Butylene Succinate ◽  
Fracture Patterns ◽  
Beet Pulp ◽  
The Impact

Sugar beet pulp (SBP) is a residue available in large quantities from the sugar industry, and can serve as a cost-effective bio-based and biodegradable filler for fully bio-based compounds based on bio-based polyesters. The heterogeneous cell structure of sugar beet suggests that the processing of SBP can affect the properties of the composite. An “Ultra-Rotor” type air turbulence mill was used to produce SBP particles of different sizes. These particles were processed in a twin-screw extruder with poly(lactic acid) (PLA) and poly(butylene succinate) (PBS) and fillers to granules for possible marketable formulations. Different screw designs, compatibilizers and the use of glycerol as a thermoplasticization agent for SBP were also tested. The spherical, cubic, or ellipsoidal-like shaped particles of SBP are not suitable for usage as a fiber-like reinforcement. In addition, the fineness of ground SBP affects the mechanical properties because (i) a high proportion of polar surfaces leads to poor compatibility, and (ii) due to the inner structure of the particulate matter, the strength of the composite is limited to the cohesive strength of compressed sugar-cell compartments of the SBP. The compatibilization of the polymer–matrix–particle interface can be achieved by using compatibilizers of different types. Scanning electron microscopy (SEM) fracture patterns show that the compatibilization can lead to both well-bonded particles and cohesive fracture patterns in the matrix. Nevertheless, the mechanical properties are limited by the impact and elongation behavior. Therefore, the applications of SBP-based composites must be well considered.

Sign in / Sign up

Export Citation Format

Share Document