scholarly journals Modeling the effect of the curing conversion on the dynamic viscosity of epoxy resins cured by an anhydride curing agent

2009 ◽  
Vol 115 (3) ◽  
pp. 1671-1674 ◽  
Author(s):  
F. Teyssandier ◽  
M. Ivanković ◽  
B. J. Love
Keyword(s):  
Dynamic Viscosity ◽  
Epoxy Resins ◽  
Curing Agent

Effect of Various Curing Agents On the Chemical Stability of Epoxy Resins

CORROSION ◽  
1961 ◽  
Vol 17 (1) ◽  
pp. 11t-20t ◽  
Author(s):  
RONALD L. DeHOFF
Keyword(s):  
Molecular Weight ◽  
Chemical Stability ◽  
Epoxy Resins ◽  
Room Temperature ◽  
Low Molecular Weight ◽  
Curing Agent ◽  
Corrosion Prevention ◽  
Curing Agents ◽  
Outdoor Weathering ◽  
Better Than

Abstract The epoxy resins most widely used in corrosion prevention are liquids of low molecular weight which can be converted to hard, tough, chemically resistant polymers by the use of various curing agents. Unlike other thermosetting resins such as polyesters, the curing agents may produce chemical linkages in the final polymers that differ from those present in the uncured form. Hence, the properties of cured epoxy resins are likely dependent upon, and may even reflect the properties of the curing agent used. Some seven different epoxy resin systems were exposed to various chemical environments and evaluatd for changes in dimensional stability and flexural strengths over a six month period. From the data presented herein, only limited conclusions may be drawn. Heat cured systems fare better than room temperature cured systems in every case. Anhydride cured epoxy resins show greater resistance to outdoor weathering than amine cured systems. 5.4.5, 6.6.8

Thermal Behavior of Epoxy Resins Cured with an Amine-Containing, Thermoplastic Poly(arylene Ether Sulphone)

1999 ◽  
Vol 19 (3) ◽  
pp. 161-174 ◽  
Author(s):  
Oriana Motta ◽  
Antonino Rocca ◽  
Valentina Siracusa ◽  
Domenico Acierno
Keyword(s):  
Differential Scanning Calorimetry ◽  
Thermal Behavior ◽  
Kinetic Parameters ◽  
Epoxy Resins ◽  
Curing Agent ◽  
Cure Process ◽  
Scanning Calorimetry ◽  
Arylene Ether ◽  
Diaminodiphenyl Methane ◽  
Residual Heat

Abstract In this paper we carried out the crosslinking of the tetraglycidyl-4,4′- diaminodiphenyl methane epoxy resin by using a reactive poly(arylene ether sulphone) as curing agent. Differential scanning calorimetry was used to derive the kinetic parameters of the reactions involved in the cure process and to evaluate the extent of the reaction as a function of time by measuring the total (ΔHr) and the residual heat(ΔHresid) of the resin at different curing times. A comparatively slower reaction was found to take place when the resin was cured with the poly(arylene ether sulphone) that when it was cured with the conventional curing agent 4,4′-diaminodiphenyl sulphone.

Thermal latent curing agent for epoxy resins from neutralization of 2‐methylimidazole with a phosphazene‐containing polyfunctional carboxylic acid

2020 ◽  
Vol 31 (7) ◽  
pp. 1553-1561
Author(s):  
Wei Wei ◽  
Xin Sun ◽  
Weitao Ye ◽  
Bowen Zhang ◽  
Xiaoma Fei ◽  
...  
Keyword(s):  
Carboxylic Acid ◽  
Epoxy Resins ◽  
Curing Agent

Improving thermal and flame-retardant properties of epoxy resins by a new imine linkage phosphorous-containing curing agent

2016 ◽  
Vol 56 (4) ◽  
pp. 441-447 ◽  
Author(s):  
Cong Xie ◽  
Jifu Du ◽  
Zhen Dong ◽  
Shaofa Sun ◽  
Long Zhao ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Epoxy Resins ◽  
Curing Agent ◽  
Flame Retardant Properties

Effect of Molecular Weight on Phase Diagram of Epoxy/Polyetherimide-Siloxane Blends

2011 ◽  
Vol 189-193 ◽  
pp. 1127-1131
Author(s):  
Xiao Yan Li ◽  
Wen Jun Gan ◽  
Yuan Ren ◽  
Zheng Xi ◽  
Ye Wen Tang ◽  
...  
Keyword(s):  
Phase Diagram ◽  
Molecular Weight ◽  
Cloud Point ◽  
Epoxy Resins ◽  
Optical Microscope ◽  
Curing Agent ◽  
Curing Time ◽  
Point Curve ◽  
Cloud Points ◽  
Cloud Point Curve

The cloud points of blends epoxy/polyetherimide-siloxane (PEI-Siloxane) without or with curing agent methyl tetrahydrophthalic anhydride (Me-THPA) after different curing time (1min, 2min, 3min) at 150oC were determined by optical microscope. The cloud point curve for uncured and cured after different time was then obtained from the experimental results with different composition. The effects of molecular weight of epoxy on phase diagram were discussed. The miscibility of blends will be taken into account in the toughing of epoxy resins by thermoplastic PEI-Siloxane copolymer later.

The Curing Kinetics Analysis of Four Epoxy Resins Using a Diamine Terminated Polyether as Curing Agent

2021 ◽  
pp. 178987
Author(s):  
Heng Zhao ◽  
Shuangshuang Xu ◽  
Anru Guo ◽  
Jie Li ◽  
Dong Liu
Keyword(s):  
Epoxy Resins ◽  
Curing Kinetics ◽  
Curing Agent ◽  
Kinetics Analysis

Improving thermal and flame-retardant properties of epoxy resins by a novel reactive phosphorous-containing curing agent

2013 ◽  
Vol 54 (5) ◽  
pp. 1192-1200 ◽  
Author(s):  
Cong Xie ◽  
Birong Zeng ◽  
Hui Gao ◽  
Yiting Xu ◽  
Weiang Luo ◽  
...  
Keyword(s):  
Flame Retardant ◽  
Epoxy Resins ◽  
Curing Agent ◽  
Flame Retardant Properties
Sign in / Sign up

Export Citation Format

Share Document