Full-Waveform Inversion of High-Frequency Teleseismic Body Waves Based on Multiple Plane-Wave Incidence: Methods and Practical Applications

ABSTRACT Teleseismic full-waveform inversion has recently been applied to image subwavelength-scale lithospheric structures (typically a few tens of kilometers) by utilizing hybrid methods in which an efficient solver for the 1D background model is coupled with a full numerical solver for a small 3D target region. Among these hybrid methods, the coupling of the frequency–wavenumber technique with the spectral element method is one of the most computationally efficient ones. However, it is normally based on a single plane-wave incidence, and thus cannot synthesize secondary global phases generated at interfaces outside the target area. To remedy the situation, we propose to use a multiple plane-wave injection method to include secondary global phases in the hybrid modeling. We investigate the performance of the teleseismic full-waveform inversion based on single and multiple plane-wave incidence through an application in the western Pyrenees and compare it with previously published images and the inversion based on a global hybrid method. In addition, we also test the influence of Earth’s spherical curvature on the tomographic results. Our results demonstrate that the teleseismic full-waveform inversion based on a single plane-wave incidence can reveal complex lithospheric structures similar to those imaged using a global hybrid method and is reliable for practical tomography for small regions with an aperture of a few hundred kilometers. However, neglecting the Earth’s spherical curvature and secondary phases leads to errors on the recovered amplitudes of velocity anomalies (e.g., about 2.8% difference for density and VS, and 4.2% for VP on average). These errors can be reduced by adopting a spherical mesh and injecting multiple plane waves in the frequency–wavenumber-based hybrid method. The proposed plane-wave teleseismic full-waveform inversion is promising for mapping subwavelength-scale seismic structures using high-frequency teleseismic body waves (>1 Hz) including coda waves recorded at large N seismic arrays.

The Ribaucour families of discrete R-congruences

While a generic smooth Ribaucour sphere congruence admits exactly two envelopes, a discrete R-congruence gives rise to a 2-parameter family of discrete enveloping surfaces. The main purpose of this paper is to gain geometric insights into this ambiguity. In particular, discrete R-congruences that are enveloped by discrete channel surfaces and discrete Legendre maps with one family of spherical curvature lines are discussed.

Curvature-Modulated Si Spherical Cap-Like Structure Fabricated by Multistep Ring Edge Etching

To create approximately spherical structures with curved sidewalls, this paper presents a method for building a series of decreasing slopes along the sidewall of a circular truncated cone. The multistep ring-edge etching technology of first reducing the concentric mask and then cutting the top off to create a mesa shape can be used to form the slopes. This wet-etching method avoids the constraints of crystallographic properties with surfactant-added Tetramethylammonium hydroxide (TMAH), enabling the manufacture of successive given inclination angles, the precise modulation of the spherical curvature by reduction design of concentric masks, and the setting of etching time. The newly approximated spherical Si microstructure patterns can be used for microlenses, quartz crystal resonators, micropulleys, and other applications. The present research is an approach to fabricate advanced microelectromechanical systems (MEMS) curved-surface structures, extending the range of 3D structures fabricated by silicon wet etching.

Mathematical Models for Simulation and Optimization of High-Flux Solar Furnaces

High-flux solar furnaces distributed throughout the world have been designed and constructed individually, i.e., on a one-by-one basis because there are several possible optical configurations that must take into account the geographical location and the maximum power to be attained. In this work, three ray-tracing models were developed to simulate the optical paths travelled by sun rays in solar furnaces of high concentration using as an example, the solar furnace SF60 of the Plataforma Solar de Almería, in Spain. All these simulation models are supported by mathematical constructions, which are also presented. The first model assumes a random distribution of sun rays coming from a concentrator with spherical curvature. The second model assumes that a random distribution of parallel rays coming from the heliostat is reflected by a concentrator with spherical curvature. Finally, the third model considers that the random parallel rays are reflected by a concentrator with a paraboloid curvature. The three models are all important in optical geometry, although the paraboloid model is more adequate to optimize solar furnaces. The models are illustrated by studying the influence of mirror positioning and shutter attenuation. Additionally, ray-tracing simulations confirmed the possibility to attain homogenous distribution of flux by means of double reflexion using two paraboloid surfaces.

Waltzing route toward double-helix formation in cholesteric shells

Liquid crystals, when confined to a spherical shell, offer fascinating possibilities for producing artificial mesoscopic atoms, which could then self-assemble into materials structured at a nanoscale, such as photonic crystals or metamaterials. The spherical curvature of the shell imposes topological constraints in the molecular ordering of the liquid crystal, resulting in the formation of defects. Controlling the number of defects, that is, the shell valency, and their positions, is a key success factor for the realization of those materials. Liquid crystals with helical cholesteric order offer a promising, yet unexplored way of controlling the shell defect configuration. In this paper, we study cholesteric shells with monovalent and bivalent defect configurations. By bringing together experiments and numerical simulations, we show that the defects appearing in these two configurations have a complex inner structure, as recently reported for simulated droplets. Bivalent shells possess two highly structured defects, which are composed of a number of smaller defect rings that pile up through the shell. Monovalent shells have a single radial defect, which is composed of two nonsingular defect lines that wind around each other in a double-helix structure. The stability of the bivalent configuration against the monovalent one is controlled by c = h/p, where h is the shell thickness and p the cholesteric helical pitch. By playing with the shell geometry, we can trigger the transition between the two configurations. This transition involves a fascinating waltz dynamics, where the two defects come closer while turning around each other.

Geometric Models for Isotropic Random Porous Media: A Review

Models for random porous media are considered. The models are isotropic both from the local and the macroscopic point of view; that is, the pores have spherical shape or their surface shows piecewise spherical curvature, and there is no macroscopic gradient of any geometrical feature. Both closed-pore and open-pore systems are discussed. The Poisson grain model, the model of hard spheres packing, and the penetrable sphere model are used; variable size distribution of the pores is included. A parameter is introduced which controls the degree of open-porosity. Besides systems built up by a single solid phase, models for porous media with the internal surface coated by a second phase are treated. Volume fraction, surface area, and correlation functions are given explicitly where applicable; otherwise numerical methods for determination are described. Effective medium theory is applied to calculate physical properties for the models such as isotropic elastic moduli, thermal and electrical conductivity, and static dielectric constant. The methods presented are exemplified by applications: small-angle scattering of systems showing fractal-like behavior in limited ranges of linear dimension, optimization of nanoporous insulating materials, and improvement of properties of open-pore systems by atomic layer deposition of a second phase on the internal surface.

The Structure Design and Dynamic Characteristic Simulation Analysis of Electric Spindle Using the PC Grinder of Ceramic Ferrule

The PC grinder of ceramic ferrule is the core part of the processing of Optical—fiber Connector. Through the processing equipment, in order to ensuring the product spherical curvature radius is SR14-18mm, eccentric ≤30 µm, surface roughness of less than 0.01 µm. In grinding process for high rotating speed and high precision machining, here used a motorized spindle technology. High speed spindle is widely applied in high speed grinder whit its advantages of light weight, high speed, compact structure, small inertia, good dynamic characteristics and so on.