Use of LARA-urea Breath Test in diagnosis ofHelicobacter pyloriInfection in Children and Adolescents: A Preliminary Study

BACKGROUND: An accurate diagnosis ofHelicobacter pyloriinfection in children currently relies upon histological assessment or culture of gastric biopsies obtained at endoscopy. Noninvasive testing would permit simpler assessment of children with dyspeptic symptoms. The primary aim of the present study was to prospectively evaluate a novel urea breath testing method in children undergoing diagnostic assessment of dyspeptic symptoms and secondarily to consider the roles of other noninvasive tests in these children.METHODS: Laser associated ratio analysis (LARA)-13C urea breath testing was performed on children presenting with upper gastrointestinal symptoms for diagnostic endoscopy. Serum and stool were collected for performance of serology and stool antigen testing, respectively. Histology and culture of endoscopic biopsies of the gastric antrum were used to establishH pyloriinfection status.RESULTS: Eight (36%) of 22 children wereH pylori-positive by histology or culture of gastric biopsies. Urea breath testing showed a sensitivity of 75%, but specificity of 100%. The deletion of a test meal from the urea breath test protocol in eight patients did not alter the utility of the test. Serology provided sensitivity of 87.5%, but a specificity of only 75%. Stool antigen testing in eight available samples provided sensitivity of 50% and specificity of 100%.CONCLUSIONS: The LARA-urea breath testing method provided less sensitivity in this group of children than suggested from previous studies. However, urea breath testing in children is easy to complete and provides rapid noninvasive results. Breath testing protocols require standardization; for instance, the addition of a test meal may not be necessary in older children. Although noninvasive tests for the presence ofH pyloriin children may provide accurate results and can be considered for use in the initial assessment of dyspeptic children, further work is required to establish the most accurate testing methods.