Numerical Investigation of Segregation Evolution during the Vacuum Arc Remelting Process of Ni-Based Superalloy Ingots

Segregation defects greatly affect the service performance and working life of castings during the vacuum arc remelting (VAR) process. However, the corresponding research on the prediction of segregation defects is still not comprehensive. Through considering the influence of water-cooled crucible on the electromagnetic field inside an ingot, a full-scale model for the comprehensive prediction of freckles and macrosegregation defects during the VAR process is developed in this paper. The macroscopic solute transport phenomenon and the segregation behavior of Ni-5.8 wt% Al-15.2 wt% Ta alloy are predicted. The results indicate that the freckles are mainly concentrated in the lower region of the ingot. With the growth of the ingot, the solute enrichment channels gradually develop into solute enrichment regions, and the channel segregation evolves into macrosegregation. The Lorentz force mainly affects the flow pattern at the top of the molten pool, while the complex flow of multiple vortices is dominated by thermosolutal buoyancy. The maximum and minimum relative segregation ratio inside the ingot can reach 290% and −90%, respectively, and the positive segregation region accounts for about 79% of the total volume. This paper provides a new perspective for understanding the segregation behavior inside the ingot by studying the segregation evolution during the VAR process.

Numerical investigations on solute transport and freckle formation during directional solidification of nickle-based superalloy ingot

In order to investigate the solute distribution and freckles formation during directional solidification of superalloy ingots, a mathematical model with coupled solution of flow field, solute and temperature distribution was developed. Meanwhile, the reliability of this model was verified by the experimental and simulation results in relevant literatures. The three-dimensional directional solidification process of Ni-5.8wt%Al-15.2wt%Ta superalloy ingot was simulated, and then the dynamic growth of solute enrichment channels was demonstrated inside the ingot. Freckles formation under different cooling rates was studied, and the local segregation degree inside the ingot was obtained innovatively after solidification. The results show that the number of freckles formed at the top gradually decreases, and so do the degree of solute enrichment at these freckles with the increase of cooling rate. Moreover, the relative and volume-averaged segregation ratio is defined to describe the segregation degree inside the ingot. The span of relative segregation ratio for positive segregation is wider than that for negative segregation, but it accounts for less of total volume. As the cooling rate increases from 0.1 K/s to 1.0 K/s, the proportion of weak segregation (-20%~20%) increases significantly from 26% to 41%, so that the segregation degree is weakened in general. By analyzing the freckles formation and segregation degree inside the ingot, the numerical simulation results can provide a theoretical basis for optimizing the actual production process to suppress the freckle defects.