A Comparative Performance Analysis of Zero Voltage Switching Class E and Selected Enhanced Class E Inverters

This paper presents a comparative analysis of the class E and selected enhanced class E inverters, namely, the second and third harmonic group of class EFn, E/Fn and the class E Flat Top inverter. The inverters are designed under identical specifications and evaluated against the variation of switching frequency (f), duty ratio (D), capacitance ratio (k), and the load resistance (RL). To offer a comparative understanding, the performance parameters, namely, the power output capability, efficiency, peak switch voltage and current, peak resonant capacitor voltages, and the peak current in the lumped network, are determined quantitatively. It is found that the class EF2 and E/F3 inverters, in general, have higher efficiency and comparable power output capability with respect to the class E inverter. More specifically, the class EF2 (parallel LC and in series to the load network) and E/F3 (parallel LC and in series to the load network) maintain 90% efficiency compared to 80% for class E inverter at the optimum operating condition. Furthermore, the peak switch voltage and current in these inverters are on average 20–30% lower than the class E and other versions for k > 1. The analysis also shows that the class EF2 and E/F3 inverters should be operated in the stretch of 1 < k < 5 and D = 0.3–0.6 at the optimum load to sustain the high-performance standard.

A High Power Density Converter with a Continuous Input Current Waveform for Satellite Power Applications

Conventional Active Clamp-Forward topology is studied for a satellite converter owing to its comparitively simple structure, minimum number of components and fine clamping capability concerning its switch voltage stress. However, it has a high switch voltage stress,a high di/dt level and has pulsating input current shape. These are disadvantageous with respect to the EMI filter size and high input voltage converter applications.To get the better of these drawbacks, a new ACF topology with a continuous input current waveform is proposed . By this proposed waveform ,the voltage stresses on the main switches are relieved. This is crucial reliability of satelite FET switches, by utilizing a two series connected structure. These conditions will allow the proposed converter to serve as a high input voltage, high power density satellite converter.

Interleaved High Step-Up Current Sharing Converter with Coupled Inductors

An interleaved high-step-up current sharing DC–DC converter with coupled inductors is proposed in this paper. The operation principle and property of this converter are analyzed. The ripple of the input current in the proposed converter is decreased significantly by using the two-phase parallel interleaved input. The voltage gain is extended and the switch voltage stress is reduced by the coupled inductors. The leakage inductance of the coupled inductors reduces the reverse-recovery problem of the output diode, resulting in the reduction of reverse-recovery losses. As there are two interleaved phases in the proposed converter, the third winding of each coupled inductor is embedded in another phase. With this design, when the leakage inductance or duty cycle is asymmetrical, the current sharing performance is still positive. Consequently, the new topology is very suitable for applications to occasions with low voltage input and high voltage output, such as the fuel cell power system. Finally, the performance of this topological circuit is verified by a prototype with 500 W output.