Metal Content and Structure of Textiles in Textile Metal Threads in Croatia from 17th to 20th Century

Textile metal threads were used to decorate historical Croatian textiles. There are three basic types of metal threads usually used on historical textiles in Croatia. These are narrow stripes, wires, and combined metal textile yarn called “srma”, made of metal thread spirally wrapped around the nonmetal textile yarn. Textile yarns were made of silk, linen, wool, or cotton. Metal threads were primarily made of gold, silver, and copper, and different alloys of these metals or threads are layered in the structure. Analysis of metal threads with three different methods was made and the most adequate method for the analysis of metal threads from historical textiles was established. Metal thread analysis was performed with scanning electron microscopy with an energy-dispersive X-ray detector (SEM-EDX), which was determined to be the most suitable for the analysis of historical textiles if cross-section analysis of metal threads is also performed. Textile threads from combined metal textile threads were analysed with a light microscope. This information of the metal threads’ content and structure as well as the composition of textile thread can lead to an understanding of the technology of production threads and also temporal and spatial dating of textile objects which is helpful to conservators and restorers of valuable historical textiles.

Interactions between Jews and Christians in Later Medieval Provence

This study uses an extensive body of archival evidence from Latin-Christian sources to explore economic and social interactions between Provençal Jews and Christians. Evidence discussed in section one indicates that the city’s Jewish and Christian communities interacted to a significant degree, and not just in the domain of moneylending. Data derived from a network analysis suggests that Jews were prominent in providing brokerage services. In the second section, analysis of a small sample of Jewish estate inventories indicates that the material profiles of Jewish and Christian families were very similar. In the third section, an analysis of a register of debt collection shows that Jews were involved in credit relations at a rate that was proportional to their population. Jewish moneylenders filled an economic niche by providing Christians with the liquidity to pay off structural debts generated by the political economy of rents and taxes.

Frozen Section Analysis and Real-Time Magnetic Resonance Imaging of Surgical Specimen Oriented on 3D Printed Tongue Model to Assess Surgical Margins in Oral Tongue Carcinoma: Preliminary Results

BackgroundA surgical margin is the apparently healthy tissue around a tumor which has been removed. In oral cavity carcinoma, a negative margin is considered ≥ 5 mm, a close margin between 1 and 5 mm, and a positive margin ≤ 1 mm. Currently, the intraoperative surgical margin status is based on the visual inspection and tissue palpation by the surgeon and intraoperative histopathological assessment of the resection margins by frozen section analysis (FSA). FSA technique is limited and susceptible to sampling errors. Definitive information on the deep resection margins requires postoperative histopathological analysis.MethodsWe described a novel approach for the assessment of intraoperative surgical margins by examining a surgical specimen oriented through a 3D-printed specific patient tongue with real-time Magnetic Resonance Imaging (MRI). We reported the preliminary results of a case series of 10 patients, prospectively enrolled, with oral tongue carcinoma who underwent surgery between February 2020 and April 2021. Two radiologists with 5 and 10 years of experience, respectively, in Head and Neck radiology in consensus evaluated specimen MRI and measured the distance between the tumor and the specimen surface. We performed intraoperative bedside FSA. To compare the performance of bedside FSA and MRI in predicting definitive margin status we computed the weighted sensitivity (SE), specificity (SP), accuracy (ACC), area under the ROC curve (AUC), F1-score, Positive Predictive Value (PPV), and Negative Predictive Value (NPV). To express the concordance between FSA and ex-vivo MRI we reported the jaccard index.ResultsIntraoperative bedside FSA showed SE of 90%, SP of 100%, F1 of 95%, ACC of 0.9%, PPV of 100%, NPV (not a number), and jaccard of 90%, and ex-vivo MRI showed SE of 100%, SP of 100%, F1 of 100%, ACC of 100%, PPV of 100%, NPV of 100%, and jaccard of 100%. These results needed to be validated in a larger sample size of 21- 44 patients.ConclusionThe presented method allows a more accurate evaluation of surgical margin status, and the first clinical experiences underline the high potential of integrating FSA with ex-vivo MRI of the fresh surgical specimen.

Experimental Study on the Behavior of Steel–Concrete Composite Decks with Different Shear Span-to-Depth Ratios

This paper presents the results of an experimental study on the mechanical behaviors of steel‒concrete composite decks with different shear span-to-depth ratios. Herein, four composite decks categorized into two types with shear span-to-depth ratios of 2.5 and 4.6 are designed for an experimental program. The decks then undergo the four-point bending tests until failure to investigate the structural responses, such as the load, displacement, crack mechanism, and failure mode. Conventional section analysis is used to derive the flexural strength of composite decks in comparison with the test results. Additionally, the ductility of the composite decks is assessed based on the displacement indices. The analysis results demonstrate that the stiffness and capacity of the composite deck increase with the decrease in the shear span length. However, the ductility of the composite slabs increases with the shear span length. The flexural strengths predicted by section analysis overestimate the actual test results. The shear span-to-depth ratio affects the crack mechanism of the composite decks.

Plasma Etching Pre-treatment for a TEM Lamella Preparation of 3D NAND with High Aspect Ratio

The 3D NAND sample with high aspect ratio (HAR) etched by plasma was investigated. By controlling the plasma etching parameters, a relatively high etch rate could be obtained. Moreover, with appropriately controlling the etch time, we could etch top region of HAR sample with expected number of layers, which could help us to completely analyze the high aspect ratio sample with TEM cross-section analysis, especially for the middle region of 3D NAND.