plant movement
Recently Published Documents


TOTAL DOCUMENTS

64
(FIVE YEARS 1)

H-INDEX

15
(FIVE YEARS 0)

Biomimetics ◽  
2021 ◽  
Vol 6 (3) ◽  
pp. 42
Author(s):  
Simon Poppinga ◽  
Pablo Schenck ◽  
Olga Speck ◽  
Thomas Speck ◽  
Bernd Bruchmann ◽  
...  

The abstraction and implementation of plant movement principles into biomimetic compliant systems are of increasing interest for technical applications, e.g., in architecture, medicine, and soft robotics. Within the respective research and development approaches, advanced methods such as 4D printing or 3D-braiding pultrusion are typically used to generate proof-of-concept demonstrators at the laboratory or demonstrator scale. However, such techniques are generally time-consuming, complicated, and cost-intensive, which often impede the rapid realization of a sufficient number of demonstrators for testing or teaching. Therefore, we have produced comparable simple handcrafted compliant systems based on paper, wood, plastic foil, and/or glue as construction materials. A variety of complex plant movement principles have been transferred into these low-cost physical demonstrators, which are self-actuated by shrinking processes induced by the anisotropic hygroscopic properties of wood or paper. The developed systems have a high potential for fast, precise, and low-cost abstraction and transfer processes in biomimetic approaches and for the “hands-on understanding” of plant movements in applied university and school courses.


2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Jorge Rocha ◽  
Lori R. Shapiro ◽  
Roberto Kolter

AbstractErwinia tracheiphila is a bacterial plant pathogen that causes a fatal wilt infection in some cucurbit crop plants. Wilt symptoms are thought to be caused by systemic bacterial colonization through xylem that impedes sap flow. However, the genetic determinants of within-plant movement are unknown for this pathogen species. Here, we find that E. tracheiphila has horizontally acquired an operon with a microbial expansin (exlx) gene adjacent to a glycoside hydrolase family 5 (gh5) gene. Plant inoculation experiments with deletion mutants in the individual genes (Δexlx and Δgh5) and the full operon (Δexlx–gh5) resulted in decreased severity of wilt symptoms, decreased mortality rate, and impaired systemic colonization compared to the Wt strain. Co-inoculation experiments with Wt and Δexlx–gh5 rescued the movement defect of the mutant strain, suggesting that expansin and GH5 function extracellularly. Together, these results show that expansin–GH5 contributes to systemic movement through xylem, leading to rapid wilt symptom development and higher rates of plant death. The presence of expansin genes in diverse species of bacterial and fungal wilt-inducing pathogens suggests that microbial expansin proteins may be an under-appreciated virulence factor for many pathogen species.


2020 ◽  
Vol 126 (6) ◽  
pp. 1099-1107 ◽  
Author(s):  
Anna S Westermeier ◽  
Natalie Hiss ◽  
Thomas Speck ◽  
Simon Poppinga

Abstract Background and Aims The endangered aquatic carnivorous waterwheel plant (Aldrovanda vesiculosa) catches prey with 3–5-mm-long underwater snap-traps. Trapping lasts 10–20 ms, which is 10-fold faster than in its famous sister, the terrestrial Venus flytrap (Dionaea muscipula). After successful capture, the trap narrows further and forms a ‘stomach’ for the digestion of prey, the so-called ‘sickle-shaped cavity’. To date, knowledge is very scarce regarding the deformation process during narrowing and consequent functional morphology of the trap. Methods We performed comparative analyses of virtual 3D histology using computed tomography (CT) and conventional 2D histology. For 3D histology we established a contrasting agent-based preparation protocol tailored for delicate underwater plant tissues. Key Results Our analyses reveal new structural insights into the adaptive architecture of the complex A. vesiculosa snap-trap. In particular, we discuss in detail the arrangement of sensitive trigger hairs inside the trap and present actual 3D representations of traps with prey. In addition, we provide trap volume calculations at different narrowing stages. Furthermore, the motile zone close to the trap midrib, which is thought to promote not only the fast trap closure by hydraulics but also the subsequent trap narrowing and trap reopening, is described and discussed for the first time in its entirety. Conclusions Our research contributes to the understanding of a complex, fast and reversible underwater plant movement and supplements preparation protocols for CT analyses of other non-lignified and sensitive plant structures.


2020 ◽  
Vol 117 (27) ◽  
pp. 16035-16042 ◽  
Author(s):  
Renate Sachse ◽  
Anna Westermeier ◽  
Max Mylo ◽  
Joey Nadasdi ◽  
Manfred Bischoff ◽  
...  

The mechanical principles for fast snapping in the iconic Venus flytrap are not yet fully understood. In this study, we obtained time-resolved strain distributions via three-dimensional digital image correlation (DIC) for the outer and inner trap-lobe surfaces throughout the closing motion. In combination with finite element models, the various possible contributions of the trap tissue layers were investigated with respect to the trap’s movement behavior and the amount of strain required for snapping. Supported by in vivo experiments, we show that full trap turgescence is a mechanical–physiological prerequisite for successful (fast and geometrically correct) snapping, driven by differential tissue changes (swelling, shrinking, or no contribution). These are probably the result of the previous accumulation of internal hydrostatic pressure (prestress), which is released after trap triggering. Our research leads to an in-depth mechanical understanding of a complex plant movement incorporating various actuation principles.


2020 ◽  
Vol 60 (4) ◽  
pp. 886-895 ◽  
Author(s):  
Simon Poppinga ◽  
David Correa ◽  
Bernd Bruchmann ◽  
Achim Menges ◽  
Thomas Speck

Synopsis Plant movements are of increasing interest for biomimetic approaches where hinge-free compliant mechanisms (flexible structures) for applications, for example, in architecture, soft robotics, and medicine are developed. In this article, we first concisely summarize the knowledge on plant movement principles and show how the different modes of actuation, that is, the driving forces of motion, can be used in biomimetic approaches for the development of motile technical systems. We then emphasize on current developments and breakthroughs in the field, that is, the technical implementation of plant movement principles through additive manufacturing, the development of structures capable of tracking movements (tropisms), and the development of structures that can perform multiple movement steps. Regarding the additive manufacturing section, we present original results on the successful transfer of several plant movement principles into 3D printed hygroscopic shape-changing structures (“4D printing”). The resulting systems include edge growth-driven actuation (as known from the petals of the lily flower), bending scale-like structures with functional bilayer setups (inspired from pinecones), modular aperture architectures (as can be similarly seen in moss peristomes), snap-through elastic instability actuation (as known from Venus flytrap snap-traps), and origami-like curved-folding kinematic amplification (inspired by the carnivorous waterwheel plant). Our novel biomimetic compliant mechanisms highlight the feasibility of modern printing techniques for designing and developing versatile tailored motion responses for technical applications. We then focus on persisting challenges in the field, that is, how to speed-boost intrinsically slow hydraulically actuated structures and how to achieve functional resilience and robustness, before we propose the establishment of a motion design catalog in the conclusion.


2019 ◽  
Vol 11 (2) ◽  
pp. 111
Author(s):  
Amir Amir

In science learning, the material is not contextual, most teachers still carry out traditional learning, teacher centered learning, and explains the photos in the book without giving a real picture in the environment. The situation has the potential to cause boredom, reduce interest, motivation, and deep meaning of what students are learning. The purpose of this study was to describe the increase in learning interest of eighth grade students of SMPN 2 Pematang Karau on plant movement material using mobile photo media. The research method uses action research which consists of 2 cycles. The results showed that learning on plant movement material with mobile photo media became more optimal and the learning outcomes of students increased in interest in learning, cognitive aspects, cheerfulness, enthusiasm, attention, and activities.


Insects ◽  
2019 ◽  
Vol 10 (2) ◽  
pp. 34 ◽  
Author(s):  
Ann Gaffney ◽  
Björn Bohman ◽  
Stephen Quarrell ◽  
Philip Brown ◽  
Geoff Allen

Pollination rates in hybrid carrot crops remain limited after introduction of honey bee hives. In this study, honey bee foraging behaviour was observed in commercial hybrid carrot seed crops. Significantly more visits were made to male-fertile (MF) rather than cytoplasmically male-sterile (CMS) flowers. Pollen was collected from bees returning to a hive, to determine daily variation in pollen loads collected and to what level the bees were foraging for carrot pollen. Honey bees visited a wide range of alternative pollen sources and made relatively few visits to carrot plants throughout the period of flowering. Visitation rates to other individual floral sources fluctuated but visitation to carrot was consistently low. The underlying rate of carrot pollen visits among collecting trips was modelled and estimated to be as low as 1.4%, a likely cause of the limited success implementing honey bee hives in carrot crops.


Sign in / Sign up

Export Citation Format

Share Document