Analysis of the Propagation Characteristic of Subsynchronous Oscillation in Wind Integrated Power System

This paper proposes oscillation propagation factors to analyze power oscillations caused by the interharmonics of doubly fed induction generators (DFIG) at different points in the power system. First, a dynamic model of the DIFG is built, including the asynchronous generator, its transmission system, converters and the control systems. Then, the state space expression is formed by deducing the input and output matrices. From this, the oscillation propagation factor is proposed and denoted to exhibit the propagation mechanism of interharmonics in the view of frequency domain, by deducing the multi-input-multi-output transfer functions matrix. Along with this, the sensitivity of propagation is calculated for adjusting the parameters to block the oscillation propagating path. Finally, the modified four machine system with two DFIGs and the New-England 39 bus system with two DFIGs is used as a test system to verify the effectiveness of the oscillation propagation factor. From this the simulation results demonstrate that the subsynchronous interharmonics of DFIGs injected into the grid will propagate to the different points of the system and results in oscillation of the power. The oscillation propagation factor could quantize the oscillation magnitude propagating from one point to other point in the wind integrated power system.

The Influence of Train-Induced Ground Motion in Assessments of Dynamic Impact on Structures

In this study, the issue of intensity of cargo train-induced soil vibrations is presented. Oscillations were measured in Warsaw-Rembertow location with application of set of seismic receivers. The analysis concerns the ground vibration differentiation issue, depending on considered direction of oscillation propagation plane. Statistic distribution of vibration intensity for directions in 3-D space were done. The issue of potential effect on engineering structures of recorded vibrations was raised. The impact based on Scale of Dynamic Effects standard was estimated in the article. Vibration intensity results were also compared with classification according to the Swiss Standard.