Phytotoxicity of Tires Evaluated in Simulated Conditions

Illegal dumps and landfills with disposed of tires are a fact of today, which should not be neglected as they represent a great ecological burden for the environment, affect the surrounding nature and disturb the landscape. This research was focused on testing the phytotoxicity of aqueous leachates from the fractions of tires in two sets of experiments—to simulate laboratory conditions (tire leaching in distilled water) and natural conditions (tire leaching in water from a recipient) using the Phytotoxkit testing kit (kit for the establishment of inhibition/stimulation effect on the root development) and the watercress test of phytotoxicity (biological method for the assessment of leachate phytotoxicity). Plants whose seeds were selected for the test were watercress (Lepidium sativum L.) and white mustard (Sinapis alba L.). The aqueous leachate was tested for 38 weeks. During the experiment, physical and chemical parameters were measured at intervals of 14 days by the testing instrument HACH TEST KIT: electric conductivity (EC), amount of dissolved oxygen (LDO) and pH. Results of root growth inhibition (IR) on the seeds of Lepidium sativum L. and Sinapis alba L. exhibited values ranging from 11.73% to 47.74% in the tested samples. Results of germination index (GI) on the seeds of Lepidium sativum L. exhibited values below 66% in the tested samples, which indicated the leachate phytotoxicity. In spite of the fact that similar studies are tackling the acute toxicity of leachates from tires (particularly to algae, embryos and animals), this research brings complementary information in testing the acute phytotoxicity of tire leachates to higher plants.

The Design and Implementation of Adsorptive Removal of Cu(II) from Leachate Using ANFIS

Clinoptilolite was investigated for the removal of Cu(II) ions from industrial leachate. Adaptive neural fuzzy interface system (ANFIS) was used for modeling the batch experimental system and predicting the optimal input values, that is, initial pH, adsorbent dosage, and contact time. Experiments were studied under laboratory batch and fixed bed conditions. The outcomes of suggested ANFIS modeling were then compared to a full factorial experimental design (23), which was utilized to assess the effect of three factors on the adsorption of Cu(II) ions in aqueous leachate of industrial waste. It was observed that the optimized parameters are almost close to each other. The highest removal efficiency was found as about 93.65% at pH 6, adsorbent dosage 11.4 g/L, and contact time 33 min for batch conditions of 23experimental design and about 90.43% at pH 5, adsorbent dosage 15 g/L and contact time 35 min for batch conditions of ANFIS. The results show that clinoptilolite is an efficient sorbent and ANFIS, which is easy to implement and is able to model the batch experimental system.

Spectrophotometric Determination of Organic Nitrogen by a Modified Lassaigne Method and Its Application to Meat Products and Baby Food

A modified Lassaigne method was developed for N determination based on fusion of the organic substance with metallic Na, conversion of the cyanide in the aqueous leachate to thiocyanate by ammonium polysulfide treatment, and colorimetric measurement of the thiocyanate formed by the addition of excessive ferric ions in acidic medium. The mean molar absorptivity of the Fe(NCS)2+ complex at 480 nm is 2.96 × 103 L/mol·cm, enabling quantitation of 0.25–7.72 ppm N (linear range) in the final solution. The relative amounts of Na, (NH4)2S2, and Fe(III) with respect to nitrogen in the analyte were optimized. The developed method was successfully applied to the determination of N in various brands of baby food, and it was compared statistically with the conventional Kjeldahl and elemental analysis methods. Protein nitrogen in a number of meat products was also precisely determined by the developed method. Thus, the total digestion time of the conventional Kjeldahl method was reduced considerably (e.g., to approximately 15 min for a dried sample) with a relatively simple spectrophotometric method requiring no sophisticated instrumentation.