Towards a rapid assessment of highway slope disasters by using multidisciplinary techniques

Mega-earthquakes and extreme climate events accompanied by intrinsic fragile geology lead to numerous landslides along mountain highways in Taiwan, causing enormous life and economic losses. In this study, a system for rapid slope disaster information integration and assessment is proposed with the aim of providing information on landslide occurrence, failure mechanisms, and subsequent landslide-affected areas to the highway authority rapidly. The functionality of the proposed system is deployed into three units: (1) geohazard rapid report (GeoPORT I), (2) multidisciplinary geological survey report (GeoPORT II), and (3) site-specific landslide simulation report (GeoPORT III). After landslide occurrence, the seismology-based monitoring network rapidly provides the initial slope disaster information, including preliminary location, event magnitude, earthquake activity, and source dynamics, within an hour. Within 3 days of the landslide, a multidisciplinary geological survey is conducted to collect high-precision topographical, geological, and remote-sensing data to determine the possible failure mechanism. After integrating the aforementioned information, a full-scale three-dimensional landslide simulation based on the discrete element method is performed within 10 days to reveal the failure process and to identify the areas potentially affected by subsequent disasters through scenario modeling. Overall, the proposed system can promptly provide comprehensive and objective information to relevant authorities after the event occurrence for hazard assessment. The proposed system was validated using a landslide event in the Central Cross-Island Highway of Taiwan.

Transmissivity and groundwater flow exert a strong influence on drainage density

The extent to which groundwater flow affects drainage density and erosion has long been debated but is still uncertain. Here, I present a new hybrid analytical and numerical model that simulates groundwater flow, overland flow, hillslope erosion and stream incision. The model is used to explore the relation between groundwater flow and the incision and persistence of streams for a set of parameters that represent average humid climate conditions. The results show that transmissivity and groundwater flow exert a strong control on drainage density. High transmissivity results in low drainage density and high incision rates (and vice versa), with drainage density varying roughly linearly with transmissivity. The model evolves by a process that is defined here as groundwater capture, whereby streams with a higher rate of incision draw the water table below neighbouring streams, which subsequently run dry and stop incising. This process is less efficient in models with low transmissivity due to the association between low transmissivity and high water table gradients. A comparison of different parameters shows that drainage density is most sensitive to transmissivity, followed by parameters that govern the initial slope and base level. The results agree with field data that show a negative correlation between transmissivity and drainage density. These results imply that permeability and transmissivity exert a strong control on drainage density, stream incision and landscape evolution. Thus, models of landscape evolution may need to explicitly include groundwater flow.

Runout Number: A New Metric for Landslide Runout Characterization

ABSTRACT Landslide runout has traditionally been quantified by the height-to-length ratio, H/L, which, in many cases, is strongly influenced by the slope of the runout path. In this study, we propose an alternative mobility measure, the unitless Runout Number, measured as the landslide length divided by the square root of the landslide area, which characterizes landslide shape in terms of elongation. We used a database of 158 landslides of varying runout distances from locations in northern California, Oregon, and Washington state to compare the two runout measurement methods and explore their predictability using parameters that can be measured or estimated using geographic information systems. The Runout Number better describes the overall runout for several landslide and slope geometries. The two mobility measures show very little correlation to each other, indicating that the two parameters describe different landslide mobility mechanisms. When compared to predictive parameters shown by prior research to relate to landslide runout, the two runout measurement methods show different correlations. H/L correlates more strongly to initial slope angle, upslope contributing area, landslide area, and grain size distribution (percent clay, silt, total fines, and sand). The Runout Number correlates more strongly to planimetric curvature, upslope contributing area normalized by landslide area, and percent sand. Although these correlations are not necessarily strong enough for prediction, they indicate the validity of both runout measurement methods and the benefit of including both numbers when characterizing landslide mobility.

Enhancement-constrained acceleration: A robust reconstruction framework in breast DCE-MRI

In patients with dense breasts or at high risk of breast cancer, dynamic contrast enhanced MRI (DCE-MRI) is a highly sensitive diagnostic tool. However, its specificity is highly variable and sometimes low; quantitative measurements of contrast uptake parameters may improve specificity and mitigate this issue. To improve diagnostic accuracy, data need to be captured at high spatial and temporal resolution. While many methods exist to accelerate MRI temporal resolution, not all are optimized to capture breast DCE-MRI dynamics. We propose a novel, flexible, and powerful framework for the reconstruction of highly-undersampled DCE-MRI data: enhancement-constrained acceleration (ECA). Enhancement-constrained acceleration uses an assumption of smooth enhancement at small time-scale to estimate points of smooth enhancement curves in small time intervals at each voxel. This method is tested in silico with physiologically realistic virtual phantoms, simulating state-of-the-art ultrafast acquisitions at 3.5s temporal resolution reconstructed at 0.25s temporal resolution (demo code available here). Virtual phantoms were developed from real patient data and parametrized in continuous time with arterial input function (AIF) models and lesion enhancement functions. Enhancement-constrained acceleration was compared to standard ultrafast reconstruction in estimating the bolus arrival time and initial slope of enhancement from reconstructed images. We found that the ECA method reconstructed images at 0.25s temporal resolution with no significant loss in image fidelity, a 4x reduction in the error of bolus arrival time estimation in lesions (p < 0.01) and 11x error reduction in blood vessels (p < 0.01). Our results suggest that ECA is a powerful and versatile tool for breast DCE-MRI.

Model Test Study on Stability Factors of Expansive Soil Slopes with Different Initial Slope Ratios under Freeze-Thaw Conditions

Expansive soil is widely distributed in seasonally frozen areas worldwide. Due to the special expansion and shrinkage characteristics of expansive soil related to water content, there are potential engineering disasters in the subgrade and slope engineering. To investigate the physical and mechanical changes within the expansive soil slope, four freeze-thaw cycles tests were performed on expansive soil slope models in an environmental chamber with slope ratios 1:1.5, 1:1 and 1:0.5. Nuclear magnetic resonance (NMR) technology is used to explain the pore changes in expansive soil during freezing and thawing. Model tests were carried out to monitor the changes in cracks, moisture content, temperature, displacement and soil pressure of the slope model. The results show an increase in the slope ratio may give rise to more intense temperature changes, promote the development of cracks in the model, and increase the temperature gradient and moisture migration rate during freezing and thawing. Following freeze-thaw cycling, the soil structure is destroyed and reassembled, and the soil pressure decreases as the slope ratio increases. Combined with the displacement of slope model and NMR test results, the slope can maintain a stable state after multiple freezing–thawing cycles under a specific moisture content ωs.

Development of Rill Erosion On Bare Sloping Farmland Under Natural Rainfall Conditions

Rill erosion is an important type of soil erosion and provide a basis for preventing and controlling soil loss on sloping farmland. This study was conducted in a standard runoff plot of bare soil (20 m length, 5 m width with a slope of 10 degrees) to monitored runoff and sediment processes during two continuous and two intermittent natural rainfall events, and observed the rill morphological characteristics after multiple rainfall conditions. We observed the runoff and sediment processes presented a pattern of multi-peaks for continuous rainfall events, and a pattern of single or two peaks during two intermittent rainfall events. The sediment yield rate with instantaneous rainfall intensity and runoff rate exhibited a peak lag phenomenon with 1–6 min. After multiple rainfall events, rill were identified as strip-shaped, V-shaped, and tree-branched distribution, and rills were mainly distributed in 5–20 cm width and 0–10 cm depth, and the mean rill length, width and depth increased 2.27, 0.30 and 0.16 times compared to the initial slope (R0). The side-wall collapse erosion was mostly greater than downcutting erosion in the slope section I, II and III. In conclusion, this study help to understanding the slope runoff and erosion mechanisms, and provide a scientific basis for soil erosion model on sloping farmland.

An investigation of inertia constant in single generator on transient analysis for an isolated electrical network system

<p>An isolated electrical network which fed by an independent generator for a low voltage system is considerable in remote and islandic areas. Although the network system has less complexity in term of system structure, its stability level is crucial due to frequency dynamical responses. An influence of initial stability margin on frequency stability study during contingency situation is a thing rather than being ignored. Here the initial transient response inherently delivers important info such as system inertia and momentarily power deficit. In this paper, an investigation of transient stability responses under different inertia values is carried out. The investigation is carried out by modelling the isolated system in MATLAB/Simulink environment which consists of state-space mathematical equations. It is confirmed that the generator system inertia shapes the initial slope, speed droop and oscillation. For a verification purpose, the influence of system inertia is also analyzed using bode diagram in which system gain and frequency margin are evaluated.</p><p> </p>

Supercritical Fluid Extraction Kinetics of Cherry Seed Oil: Kinetics Modeling and ANN Optimization

This study was primarily focused on the supercritical fluid extraction (SFE) of cherry seed oil and the optimization of the process using sequential extraction kinetics modeling and artificial neural networks (ANN). The SFE study was organized according to Box-Behnken design of experiment, with additional runs. Pressure, temperature and flow rate were chosen as independent variables. Five well known empirical kinetic models and three mass-transfer kinetics models based on the Sovová’s solution of SFE equations were successfully applied for kinetics modeling. The developed mass-transfer models exhibited better fit of experimental data, according to the calculated statistical tests (R2, SSE and AARD). The initial slope of the SFE curve was evaluated as an output variable in the ANN optimization. The obtained results suggested that it is advisable to lead SFE process at an increased pressure and CO2 flow rate with lower temperature and particle size values to reach a maximal initial slope.

Enhancement of Heterogeneous Microfluidic Immunosensors Using New Sensing Area Shape with Electrothermal Effect

In heterogeneous microfluidic immunosensors, the diffusion boundary layer produced on the sensing area represents a critical factor that limits the biosensor performance. A three-dimensional simulation using the finite element method on the binding reaction kinetics of C-reactive protein (CRP) has been performed. We present a new microfluidic biosensor based on a novel reaction-surface design without and with electrothermal force. Two reaction surface configurations were studied. The kinetic reaction rate was calculated with coupled Navier−Stokes, mass diffusion, energy, and Laplace equations. The numerical results reveal that the characteristics of a microfluidic biosensor are more enhanced by using the circular ring design of the sensing area coupled with the electrothermal force. The rate of initial slope related to the association phase is multiplied by a factor 2 when the voltage is increased from 10 to 15 V. The results prove to be valuable in designing new microfluidic biosensors.

Transmissivity and groundwater flow exert a strong influence on drainage density

The extent to which groundwater flow affects drainage density and erosion has long been debated, but is still uncertain. Here, I present a new hybrid analytical and numerical model that simulates groundwater flow, overland flow, hillslope erosion and stream incision. The model is used to explore the relation between groundwater flow and the incision and persistence of streams for a set of parameters that represent average humid climate conditions. The results show that transmissivityand groundwater flow exert a strong control on drainage density. High transmissivity results in low drainage density and high incision rates and vice versa, with drainage density varying roughly linearly with transmissivity. The model evolves by a process that is defined here as groundwater capture, whereby streams with a higher rate of incision draw the watertable below neighbouring streams, which subsequently run dry and stop incising. This process is less efficient in models with low transmissivity due to the association of low transmissivity and high watertable gradients. A comparison of different parameters shows that drainage density is the most sensitive to transmissivity, followed by parameters that govern initial slope and stream erosion. These results imply that permeability and transmissivity exert a strong control on drainage density, stream incision and landscape evolution and that models of landscape evolution may need to explicitly include groundwater flow.