Removal and Comparative Adsorption of Anionic Dye on Various MgAl synthetic Clay

In this study, the adsorption of Congo red dye in an aqueous solution on two synthetic clay adsorbents, MgAl-LDH (2:1) and MgAl-LDH (3:1), was investigated using batch system experiments. The adsorbents' characterization was carried out by various techniques such as scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy FT-IR. The conditions applied in the adsorption experiments including the mass of adsorbent, initial concentration, contact time, pH, and temperature. The kinetic data were modeled by pseudo-first-order and pseudo-second-order. Langmuir and Freundlich's models analyzed the adsorption isotherms of Congo red on the two adsorbents. It was found that the adsorption process could be described by Langmuir isotherm. The maximum amount of adsorption is 285.71 and 166.66 mg/g for MgAl-LDH (2:1) and MgAl-LDH (3:1), respectively. Thermodynamic parameters such as enthalpy ∆H°, enthalpy ∆S°, and free enthalpy ∆G° were also evaluated to predict the nature of adsorption.

Influence of medium structure on the physicochemical properties of aging colloidal dispersions investigated using the synthetic clay Laponite®

Physical aging in colloidal dispersions manifests as a reduction in kinetic freedom of the colloids. In aqueous dispersions of charged clay colloids, the role of interparticle electrostatic interactions in determining...

Photonic composite materials from cellulose nanorods and clay nanolayers

Cellulose nano crystals (CNCs) are promising materials for energy efficient buildings related to the control of reflectivity and heat absorption/reflection of light. In this sense it is important to improve CNCs films fire retardant properties, which can be achieved by adding clays. Cellulose nanocrystals (CNCs) and nanolayers obtained from Sodium Fluorohectorite (NaFh) synthetic clay are both known to form liquid crystalline phases in aqueous suspensions. CNCs form cholesteric phases, which structure is preserved after water evaporation, while dry NaFh nanolayers aligned films collapse. In this initial work, it is shown that CNCs are compatible with NaFh clay. We demonstrate that the liquid crystalline phase of CNCs in water is not destroyed by the presence of NaFh nanolayers. The NaFh nanolayers act as planar anchoring surfaces to the cellulose nanorods and, after evaporation of the water coloured films are obtained. The precursor solutions and the photonic films were investigated by Describe several techniques.

Dual-Electronic Nanomaterial (Synthetic Clay) for Effective Removal of Toxic Cationic and Oxyanionic Metal Ions from Water

A synthetic clay (Mg/Al-layered double hydroxides; LDH) was directly synthesized through a simple coprecipitation method under a low-supersaturation condition. The clay was applied to remove metal cations (Cd2+, Cu2+, Pb2+, Ni2+, and Cr3+) and oxyanions (MnO4– and Cr2O72–) from a single aqueous solution. The result demonstrated that LDH exhibited a poor porosity (its specific surface area and total pore volume: 23.2 m2/g and 0.161 cm3/g, respectively) and positively charged surface within solution pH from 3.0 to 12. The X-ray powder diffraction (XRD) data suggested that the basal spacing of LDH was 0.773 nm. The presence of active CO32– anions in the interlayer region of LDH that played an extremely important role in the adsorption process was identified by XRD and Fourier-transform infrared spectroscopy (FTIR). Energy-dispersive X-ray spectroscopy (SEM) analysis indicated that LDH possessed a surface morphology like a plate with a hexagonal shape. The adsorption isotherms of LDH towards various potentially toxic metals were conducted at 1.0 g/L, pHEquilibrium 5.0, 30°C, and 24 h. The Langmuir maximum adsorption capacity of LDH towards the target metals exhibited the following order: 1.299 mmol/g (for Ni2+ adsorption) > 0.880 mmol/g (Cd2+) > 0.701 mmol/g (Cr3+) > 0.657 mmol/g (Pb2+) > 0.601 mmol/g (Cu2+) > 0.589 mmol/g (Cr2O72–) > 0.522 mmol/g MnO4–. The synthetic clay can adsorb both cations and anions in the solution. Therefore, such LDH material can serve as a potential dual-electronic adsorbent for effectively eliminating various oxyanionic and cationic metal ions from water media.

Layered Silicate-Alginate Composite Particles for the pH-Mediated Release of Theophylline

Numerous natural and synthetic clay minerals have proven to be excellent drug carriers for high drug-loaded and sustained release formulations due to their considerable ion exchange, adsorption, and swelling capacities. Moreover, the synthetic smectite clays have added advantages in terms of compositional purity and controlled cation exchange capacity in comparison to natural clays. This study involves the intercalation of theophylline (TP) in a synthetic clay, Laponite® (LP), followed by the inclusion of the resulting intercalates into sodium alginate (SA) beads to achieve pH-controlled drug release. Maximum intercalated drug incorporation of 68 mg/g was obtained by ion exchange at pH 1.2 and confirmed by an increase in basal spacing of the clay from 12.9 to 15.5 Å. TP release from the binary LP-TP intercalates in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) was found to be 40% and 70%, respectively. LP-TP particles were also incorporated in an SA matrix via polymer crosslinking using CaCl2(aq) to improve the pH selective release. The ternary polymer-clay-drug composite particles effectively prevented the release of TP at low pH in SGF and resulted in sustained release in SIF, with 40% dissolution within 120 min.