Effects of Short-Term Ageing Temperature on Conventional and High-Temperature Properties of Paving-Grade Bitumen with Anti-Stripping and WMA Additives

The presented study explores the effects of decreased temperatures utilized in rolling thin-film oven (RTFOT) laboratory short-term ageing of asphalt binders based on 35/50- and 50/70-penetration paving-grade bitumen. Additionally, the effects of three additives used with these binders at different concentrations are evaluated: liquid anti-stripping agent, liquid warm-mix additive, and solid warm-mix additive. The resulting asphalt binders were subjected to basic (penetration at 25 °C, softening point, dynamic viscosity) and functional high-temperature characterization (G*/sin(δ), high critical temperature, non-recoverable creep compliance). It was found that the decreased short-term ageing temperatures may detrimentally impact the high-temperature grade of bituminous binders, but this effect can be mitigated by the use of appropriate additives. What is more, it was found that bituminous binders may respond differently to the aforementioned factors. Based on the results, it is advised that asphalt binders intended for use in warm-mix asphalts should be thoroughly tested to appropriately simulate the mixture production process and its effects.

The Effect of Waste Plastics on the Ageing Phenomenon of Bituminous Binders and Asphalt Mixtures

The push for environmental sustainability in the civil engineering industry has resulted in an increased interest in the use of recycled construction materials, with one example being the use of waste plastic for the modification of bituminous binder in asphalt mixtures. Existing research has associated waste plastics with various binder and asphalt mixture performance enhancing properties. However, there is a lack of research on the age-related durability of waste plastic-modified roads. This research compared the effect of commercially available waste plastic binder modifiers on the ageing phenomenon of bituminous binders and asphalt mixtures, to the effect of conventional polymers SBS and EVA, through artificial bituminous binder and asphalt mixture ageing performed in a laboratory. The addition of polymers (both waste and virgin) resulted in an increase in binder stiffness after short-term ageing as the polymer content increased. The effect of the waste plastic on ageing was comparable to the effects associated with the conventional polymers, and it was concluded that the waste plastic binder modified products should be considered sustainable alternatives to standard polymers for bituminous binder and asphalt mixture modification.

An Attempt to Track Two Grades of Road Bitumen from Different Plants Using Fourier Transform Infrared Spectroscopy

This study aimed to evaluate the possibility of using Fourier Transform Infrared (FTIR) spectroscopy to track binders produced by three different plants: plants A, B, and C. The work included the quality assessment of 80 bituminous materials graded as BND 70/100 and 100/130 according to GOST 33133 (Russian interstate standard) and chemical analyses using FTIR spectroscopy. FTIR analyses were conducted before and after short-term ageing in a Rolling Thin Film Oven Test (RTFOT). Thus, the number of binder samples was multiplied by two (2) for a final total of 160 infrared (IR) spectra. All infrared spectra were normalised to ensure the reliability of results, and the standard deviation and variance coefficient were included. The principal purpose of the present work was to track the origin and the ageing extent of the bituminous binders under study.