Chipping Reduction Using Thermally-Assisted Friction Element Welding

The use of multiple material in the structural components of a vehicle allows for significant weight reduction. Friction element welding (FEW) is a novel method that allows the joining of two or more dissimilar material sheets. A limitation of this process is the chip formation in high strength aluminum alloys, which is observed as the protrusion of thin aluminum segments from under the head of the fastener. Chipping can degrade the joint’s strength over time due to accelerated crevice corrosion. A novel method is proposed to eliminate chip formation using thermal assistance. A grading scheme is developed to quantify the severity of chip formation. The effect of thermal assistance on chipping is analyzed. An investigation is also carried out to validate that the thermal assistance does not negatively affect the process time, energy, and joint strength. Thermal assistance is proposed to be a novel method of overcoming this limitation to allow more widespread use of the FEW process for higher-strength aluminum alloys. Future work will include the development of feasible, rapid methods of heating and measurement of energy utilization for implementation in the industrial environment.

Conduction Heat Assisted Friction Element Welding

Increasing awareness of global warming and strict government regulations have required the automotive industry to pursue lightweighting as an avenue towards increased vehicle efficiency. Lightweight designs typically rely heavily on multi-material use, which enables selective strengthening of critical areas without additional, unnecessary mass. Joining these materials during manufacturing has proven to be a challenging endeavor. Friction element welding (FEW) is one process that is capable of joining aluminum to steel. This two-sided joining technique utilizes a fastener to secure the aluminum sheet by creating a friction weld with the steel sheet. While this process is extremely robust for most materials, the FEW process can result in the extrusion of material from underneath the head of the fastener, termed chipping, which leads to corrosion and aesthetic issues. This behavior is typically seen in high strength aluminum alloys, such as 7075. A solution to chipping is implemented herein, which utilizes a modified downholder to conductively heat the aluminum sheet prior to the FEW process. This heating method was explored experimentally and through various numerical analyses. This method was found to be a viable option for relieving chipping. While the process time was only increased by a maximum of 2.5 seconds, faster, more localized heating should be targeted for future work.

Thermal-Mechanical Numerical Modeling of the Friction Element Welding Process

To improve the fuel economy, the automobile industry is vigorously shifting towards using a mix of lightweight materials which offers high strength-to-weight ratio. Dissimilar material joining is of critical importance in this area. Friction element welding (FEW) has been proposed for dissimilar materials, with the capability of joining high strength materials of varying thickness in minimal time with low input energy. A coupled thermal-mechanical finite element model is developed in this work to better understand the physical mechanisms involved in the process and predict the evolution of parameters such as temperature, stress, material flow, and weld quality. The Coupled Eulerian-Lagrangian (CEL) approach is adopted to capture the severe plastic deformation of both the tool and the workpiece. The material deformation and temperature evolution are analyzed at different steps, and good agreement are shown between the simulation results and the experimental data.

Investigation of the Cleaning and Welding Steps From the Friction Element Welding Process

The requirement of increased fuel economy standards has forced automakers to incorporate multi-materials into their current steel dominant vehicles in order to lightweight their fleets. Technologies such as Self Piercing Rivets and Flow Drill Screws are currently implemented for joining aluminum to high-strength steels but only one-technology is viable for joining aluminum to ultra-high-strength steels without pre-holes, namely Friction Element Welding. This study is aimed at investigating how variations in the cleaning and welding steps of the Friction Element Welding process influence joint quality. A design of experiment was conducted to understand the influence of key process parameters (endload, spindle RPM, and relative distance) during these steps on the pre-defined joint quality metrics of head height, weld zone diameter, under-head fill area, temperature, and microhardness. It is found that cleaning step parameters have the greatest influence on process time and energy consumption, while welding step parameters greatly influence maximum torque on the element, head height, and underhead fill, with both cleaning force and weld force influencing weld diameter, all parameters influence temperature.