Role and Important Properties of a Membrane with Its Recent Advancement in a Microbial Fuel Cell

Microbial fuel cells (MFC) are an emerging technology for wastewater treatment that utilizes the metabolism of microorganisms to generate electricity from the organic matter present in water directly. The principle of MFC is the same as hydrogen fuel cell and has three main components (i.e., anode, cathode, and proton exchange membrane). The membrane separates the anode and cathode chambers and keeps the anaerobic and aerobic conditions in the two chambers, respectively. This review paper describes the state-of-the-art membrane materials particularly suited for MFC and discusses the recent development to obtain robust, sustainable, and cost-effective membranes. Nafion 117, Flemion, and Hyflon are the typical commercially available membranes used in MFC. Use of non-fluorinated polymeric membrane materials such as sulfonated silicon dioxide (S-SiO2) in sulfonated polystyrene ethylene butylene polystyrene (SSEBS), sulfonated polyether ether ketone (SPEEK) and graphene oxide sulfonated polyether ether ketone (GO/SPEEK) membranes showed promising output and proved to be an alternative material to Nafion 117. There are many challenges to selecting a suitable membrane for a scaled-up MFC system so that the technology become technically and economically viable.

An overview on the progress and development of modified sulfonated polyether ether ketone membranes for vanadium redox flow battery applications

Vanadium redox flow batteries (VRFB) are among the most promising approaches to efficiently store renewable energies. In such battery type, Nafion is commonly used as membrane material but suffers from high vanadium crossover and cost. These drawbacks negatively influence the widespread commercial application of VRFBs. Alternative membrane materials with high performance and low cost are thus being developed to address these shortfalls. Among those, possible materials for the VRFB membrane is sulfonated polyether ether ketone (SPEEK), which recently attracted considerable attention due to its low cost, combined with mechanical and chemical stability, and ease of preparation. This review summarizes the research activities related to the development of SPEEK-based membranes for VRFB applications and gives an overview of the properties of PEEK and its sulfonated form. A critical analysis on the challenges of SPEEK-based membranes is also discussed.

MXene potassium titanate nanowire/sulfonated polyether ether ketone (SPEEK) hybrid composite proton exchange membrane for photocatalytic water splitting

A cross-linked sulfonated polyether ether ketone (C-SPEEK) was incorporated with MXene/potassium titanate nanowire (MKT-NW) as a filler and applied as a proton exchange membrane for photocatalytic water splitting.

Modelling IR Spectra of Sulfonated Polyether Ether Ketone (SPEEK) Membranes for Fuel Cells

SPEEK (sulfonated polyether ether ketone) membranes have been prepared and characterized. The SPEEK membrane geometry and theoretical vibration spectra calculated using density functional theory (DFT) as depending from membrane chain length and polymer cross-linking. Analyzed the limitations of the method by comparing theoretical and experimental IR spectra.

Transport Properties and Mechanical Features of Sulfonated Polyether Ether Ketone/Organosilica Layered Materials Nanocomposite Membranes for Fuel Cell Applications

In this work, we study the preparation of new sulfonated polyether ether ketone (sPEEK) nanocomposite membranes, containing highly ionic silica layered nanoadditives, as a low cost and efficient proton exchange membranes for fuel cell applications. To achieve the best compromise among mechanical strength, dimensional stability and proton conductivity, sPEEK polymers with different sulfonation degree (DS) were examined. Silica nanoplatelets, decorated with a plethora of sulfonic acid groups, were synthesized through the one-step process, and composite membranes at 1, 3 and 5 wt% of filler loadings were prepared by a simple casting procedure. The presence of ionic layered additives improves the mechanical strength, the water retention capacity and the transport properties remarkably. The nanocomposite membrane with 5% wt of nanoadditive exhibited an improvement of tensile strength almost 160% (68.32 MPa,) with respect to pristine sPEEK and a ten-times higher rate of proton conductivity (12.8 mS cm−1) under very harsh operative conditions (i.e., 90 °C and 30% RH), compared to a filler-free membrane. These findings represent a significant advance as a polymer electrolyte or a fuel cell application.