Formulation of Compressed Earth Blocks Stabilized by Glass Waste Activated with NaOH Solution

Due to the increase in demand for building materials and their high prices in most developing countries, many researchers are trying to recycle waste for use as secondary raw materials. The aim of this study is the optimization of a mixture of compressed earth blocks based on two sediments. These sediments were tested through the Vicat test to determine the proportion of each one and the optimal water content. The mixtures were treated by adding 10% of blast furnace slag and different proportions of dissolved glass in a NaOH solution. The results indicated that the mixture of 70% Oran sediments with 30% Sidi Lakhdar sediments treated with 4% glass waste produced a CEB (compressed earth block) with high compressive strength with low porosity. In addition, formulated CEBs have a very good resistance to water immersion.

Artificial Neural Networks to Predict the Mechanical Properties of Natural Fibre-Reinforced Compressed Earth Blocks (CEBs)

The purpose of this study is to explore Artificial Neural Networks (ANNs) to predict the compressive and tensile strengths of natural fibre-reinforced Compressed Earth Blocks (CEBs). To this end, a database was created by collecting data from the available literature. Data relating to 332 specimens (Database 1) were used for the prediction of the compressive strength (ANN1), and, due to the lack of some information, those relating to 130 specimens (Database 2) were used for the prediction of the tensile strength (ANN2). The developed tools showed high accuracy, i.e., correlation coefficients (R-value) equal to 0.97 for ANN1 and 0.91 for ANN2. Such promising results prompt their applicability for the design and orientation of experimental campaigns and support numerical investigations.

Fiber Reinforced Compressed Earth Blocks: Evaluating Flexural Strength Characteristics Using Short Flexural Beams

There are ongoing research efforts directed at addressing strength limitations of compressed earth blocks (CEB) that inhibit their deployment for structural applications, particularly in areas where masonry systems are regularly subjected to lateral loads from high winds. In this paper, the authors focus specifically on the extent to which polypropylene (PP) fibers can be used to enhance the flexural performance of CEB. Cementitious matrices used for CEB production exhibit low tensile and flexural strength (brittle) properties. This work investigates plain (unreinforced) and fiber-reinforced specimens (short flexural beams) with fiber mass content of 0.2, 0.4, 0.6, 0.8, and 1.0% and ordinary Portland cement (OPC) content of 8%. The influence of the inclusion of fiber was based on tests conducted using the Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (ASTM C1609). Material properties that were quantified included first-peak strength, peak strength, equivalent flexural strength, residual strength, and flexural toughness. There was an observed improvement in the performance of the soil-fiber matrixes based on these results of these tests. It was also observed that when the fiber content exceeded 0.6% and above, specimens exhibited a deflection- hardening behavior; an indication of improvement in ductility. An equivalent flexural strength predictive model is proposed.

Seismic performance of new adobe bricks masonry: Design and experiment

At present, adobe houses with traditional characteristics are still widely used in rural areas in western China, but their seismic performance is relatively poor, and they often suffer serious damage under earthquake. To improve the seismic performance of traditional adobe buildings while retaining the characteristics of residential buildings, the mechanical properties of compressed earth blocks (CEB) were tested in this study, and the microstructure characteristics of CEB after failure were analyzed by electron microscope. On this basis, six adobe wall specimens were designed and tested by quasi-static loading to investigate the influence of core columns and different types of bricks on its seismic performance. The results show that the core column can improve the bearing capacity and shear capacity of hollow CEB, and it can also significantly increase the bearing capacity, energy dissipation capacity, and ductility of CEB wall. In general, the adobe wall with core columns shows excellent seismic performance, which can provide a new choice for improving the seismic performance of the adobe house.