blade tip geometry
Recently Published Documents


TOTAL DOCUMENTS

12
(FIVE YEARS 0)

H-INDEX

4
(FIVE YEARS 0)

2019 ◽  
Author(s):  
Dominic D. Hänni ◽  
◽  
Rainer Schädler ◽  
Anestis I. Kalfas ◽  
Reza S. Abhari ◽  
...  

2018 ◽  
Vol 141 (1) ◽  
Author(s):  
Marek Pátý ◽  
Bogdan C. Cernat ◽  
Cis De Maesschalck ◽  
Sergio Lavagnoli

The leakage flows within the gap between the tips of unshrouded rotor blades and the stationary casing of high-speed turbines are the source of significant aerodynamic losses and thermal stresses. In the pursuit for higher component performance and reliability, shaping the tip geometry offers a considerable potential to modulate the rotor tip flows and to weaken the heat transfer onto the blade and casing. Nevertheless, a critical shortage of combined experimental and numerical studies addressing the flow and loss generation mechanisms of advanced tip profiles persists in the open literature. A comprehensive study is presented in this two-part paper that investigates the influence of blade tip geometry on the aerothermodynamics of a high-speed turbine. An experimental and numerical campaign has been performed on a high-pressure turbine stage adopting three different blade tip profiles. The aerothermal performance of two optimized tip geometries (one with a full three-dimensional contoured shape and the other featuring a multicavity squealer-like tip) is compared against that of a regular squealer geometry. In the second part of this paper, we report a detailed analysis on the aerodynamics of the turbine as a function of the blade tip geometry. Reynolds-averaged Navier-Stokes (RANS) simulations, adopting the Spalart–Allmaras turbulence model and experimental boundary conditions, were run on high-density unstructured meshes using the numecafine/open solver. The simulations were validated against time-averaged and time-resolved experimental data collected in an instrumented turbine stage specifically setup for the simultaneous testing of multiple blade tips at scaled engine-representative conditions. The tip flow physics is explored to explain variations in turbine performance as a function of the tip geometry. Denton's mixing loss model is applied to the predicted tip gap aerodynamic field to identify and quantify the loss reduction mechanisms of the alternative tip designs. An advanced method based on the local triple decomposition of relative motion is used to track the location, size and intensity of the vortical flow structures arising from the interaction between the tip leakage flow and the main gas path. Ultimately, the comparison between the unconventional tip profiles and the baseline squealer tip highlights distinct aerodynamic features in the associated gap flow field. The flow analysis provides guidelines for the designer to assess the impact of specific tip design strategies on the turbine aerodynamics and rotor heat transfer.


Author(s):  
Marek Pátý ◽  
Bogdan Cernat ◽  
Cis De Maesschalck ◽  
Sergio Lavagnoli

The leakage flows within the gap between the tips of unshrouded rotor blades and the stationary casing of high-speed turbines are the source of significant aerodynamic losses and thermal stresses. In the pursuit for higher component performance and reliability, shaping the tip geometry offers a considerable potential to modulate the rotor tip flows and to weaken the heat transfer onto the blade and casing. Nevertheless, a critical shortage of combined experimental and numerical studies addressing the flow and loss generation mechanisms of advanced tip profiles persists in the open literature. A comprehensive study is presented in this two-part paper that investigates the influence of blade tip geometry on the aerother-modynamics of a high-speed turbine. An experimental and numerical campaign has been performed on a high-pressure turbine stage adopting three different blade tip profiles. The aerothermal performance of two optimized tip geometries (one with a full three-dimensional contoured shape and the other featuring a multi-cavity squealer-like tip) is compared against that of a regular squealer geometry. In the second part of this paper, we report a detailed analysis on the aerodynamics of the turbine as a function of the blade tip geometry. Reynolds-averaged Navier-Stokes simulations, adopting the Spalart-Allmaras turbulence model and experimental boundary conditions, were run on high-density unstructured meshes using the Numeca FINE/Open solver. The simulations were validated against time-averaged and time-resolved experimental data collected in an instrumented turbine stage specifically set up for the simultaneous testing of multiple blade tips at scaled engine-representative conditions. The tip flow physics is explored to explain variations in turbine performance as a function of the tip geometry. Denton’s mixing loss model is applied to the predicted tip gap aerodynamic field to identify and quantify the loss reduction mechanisms of the alternative tip designs. An advanced method based on the local triple decomposition of relative motion is used to track the location, size and intensity of the vortical flow structures arising from the interaction between the tip leakage flow and the main gas path. Ultimately, the comparison between the unconventional tip profiles and the baseline squealer tip highlights distinct aerodynamic features in the associated gap flow field. The flow analysis provides guidelines for the designer to assess the impact of specific tip design strategies on the turbine aerodynamics and rotor heat transfer.


2017 ◽  
Vol 60 (10) ◽  
pp. 1480-1493 ◽  
Author(s):  
Lei Shi ◽  
DeSheng Zhang ◽  
RuiJie Zhao ◽  
WeiDong Shi ◽  
YongXin Jin

2016 ◽  
Vol 719 ◽  
pp. 137-141 ◽  
Author(s):  
Pusit Mitsomwang ◽  
Pirapa Natpukkana ◽  
Rattana Borrisutthekul ◽  
Shigeru Nagasawa

This research work was carried out aiming to investigate the cutting characteristics of a soft metallic sheet subjected to the wedge blade indentation. The indentation of a lead alloy worksheet was conducted, experimentally using a center bevel blade in order to reveal the experimental background of the indentation. In addition, to investigate the effects of the blade tip geometry, the bevel angle of the wedge blade, on the cutting characteristics of the worksheet, the finite element method (FEM) analysis was conducted. By varying the bevel angle, the critical levels of stresses for the necking of the worksheet were detected. Also, it was found that the bevel angle affected the cutting load resistance, the necking of the worksheet and the final feature of the wedged edge.


1994 ◽  
Author(s):  
Shimpei Mizuki ◽  
Hoshio Tsujita

Three-dimensional incompressible turbulent flow within a linear turbine cascade with tip clearance is analyzed numerically. The governing equations involving the standard k-ε model are solved in the physical component tensor form with a boundary-fitted coordinate system. In the analysis, the blade tip geometry is treated accurately in order to predict the flow through the tip clearance in detail when the blades have large thicknesses. Although the number of grids employed in the present study is not enough because of the limitation of computer storage memory, the computed results show good agreements with the experimental results. Moreover, the results clearly exhibit the locus of minimum pressure on the rear part of the pressure surface at the blade tip.


Sign in / Sign up

Export Citation Format

Share Document