USE OF MICROWAVE RADIATION FOR SEPARATION OF LIQUID GLASS HEAT INSULATION MATERIALS

The study of the thermal insulation market of Ukraine showed that the market is dominated by aerated concrete and silicates, which are used as thermal insulation materials at an average density of 300-500 kg / m3. Their disadvantages include high values of water absorption and hygroscopicity, as well as very low flexural strength, because this material does not have elasticity and the use of small bending forces leads to its cracking. Foam glass has a set of operational properties that meet the highest regulatory requirements. Foam glass is the strongest of all effective thermal insulation materials, but this material is fragile. It is sensitive to vibration - induced damage. In addition, the technology of production of foam glass is quite complex and requires high energy consumption, as a consequence, the cost of this material is high. Therefore, it was important to develop thermal insulation material with the appropriate level of performance while reducing production costs. This was achieved by using energy-saving microwave technology to swell liquid glass materials. This technology is based on the simultaneous swelling of the liquid glass granulate and the binder under microwave radiation, which, due to the volumetric heating of the liquid glass composition, allows to obtain a strong monolithic material with a rigid, homogeneous and mostly closed-porous structure. The production of thermal insulation materials is proposed to be carried out on the basis of liquid glass granulate, because the introduction of granules reduces the deformability and shrinkage of the material and prevents its cracking, increases its strength, because the granular material has a certain plastic deformation, reduces water hygroscopicity. granules swell to form a compacted shell, which slows down the absorption kinetics of water and its vapor. The monolithic granules are proposed to be carried out with a binder that foams not only due to the release of water, but also with the help of a gasifier, because this technology will allow uniform distribution of the binder in the intergranular space, thus forming a more homogeneous structure of the material, which has a positive effect on its physical and mechanical characteristics.

Effect of foam glass granules fillers modification of lime-sand products on their microstructure

Silicate products are products made exclusively from natural raw materials. A relatively high value of the heat transfer coefficient is still considered a fault. This property adversely affects the thermal insulation of buildings and energy consumption, so you should look for materials with a low heat conduction coefficient. One of the ways of obtaining such products can be the use of light, porous fillers in the mass of lime-sand products.Due to the above, particular attention was paid to white foam glass in the form of granules, which is a product of recycling glass cullet. The research was carried out with a granulate size of 0.25-0.5 mm, share of which in the tested samples ranged from 5 to 30%. The obtained results were referred to the tests carried out on basic (lime-sand) sample.The aim of the article is to determine the correctness of the formation of selected usable properties of modified lime-sand products, taking into account changes in their microstructure. The article describes the results of volume density and compressive strength tests of basic samples and the samples modified by using the expanded glass granulate as well as the results of their observations by using of SEM and tests of phase composition obtained from XRD.

Research of the Temperature Field Process in the Soil for a Home - Founded on a Foam Glass Granulate

Foam glass granulate is environmentally friendly, heat-insulating building material which is made from recycled glass waste. It is a very porous material with low density, with good thermal insulation properties, high static load capacity and almost zero water absorption. The paper deals with the research of the temperature field process in the soil under the floor of a passive house built on a reinforced concrete slab foundation with a layer of compacted subsoil using raw materials friendly to the environment in the form of granules of foamed glass. This method of progressive foundation of the building addresses the elimination of thermal bridges at the base and establish a continuous thermal insulating of the building envelope without thermal bridges.