Nitride-Coated and Anodic-Oxidized Titanium Promote a Higher Fibroblast and Reduced Streptococcus gordonii Proliferation Compared to the Uncoated Titanium

Titanium shows optimal biocompatibility properties; however, its gray color may be a limit for aesthetic results of dental rehabilitations. Some surface treatments that change the color of the material have been proposed. The aim of this study is to, in vitro, investigate the biocompatibility of the surfaces subjected to titanium nitride (NiT) coating and anodic-oxidized (AO) treatment and their propensity to impair bacterial proliferation. The viability of primary human gingival fibroblasts (HGFs) has been evaluated through a methyl thiazolyl tetrazolium (MTT) assay in three experimental groups: uncoated titanium (UNCOATED), titanium nitride (NiT)-coated surface, and anodic-oxidized (AO) titanium. Bacterial proliferation experiments were performed using a Streptococcus gordonii clinical isolate in contact with the three different above-mentioned materials. The treated surfaces (NiT and AO) showed a significantly higher fibroblast proliferation than the uncoated titanium alloy (p < 0.05). In contrast, Streptococcus gordonii growth was significantly higher on the untreated titanium (p < 0.05).

Formation of PEO-Coatings for Implants Materials

The paper presents results of investigation of biocompatible coatings on VT1-0 commercially pure titanium formed using plasma electrolytic oxidation (PEO) method. The effects of samples with different surface treatment on the functional activity of cells innate immunity have been studied. The study of enzymes has showed the higher stimulation of cellular metabolism during the first hour of contact with the PEO-coating in comparison with the uncoated titanium. The smallest immunostimulatory influence has been obtained for PEO-coating. It has been established that PEO-layers on titanium affect the functional state of cellular processes accompanying bone mineralization.

Poly(methyl methacrylate) Coating of Titanium Workpieces to Reduce Burrs in Micro-drilling

A technique to reduce burr height in titanium micro-drilling is presented: a poly (methyl methacrylate) coating was applied before machining on the upper and lower surfaces of a titanium specimen (0.5-mm thick). After drilling, a cleaning process (acetone bath) was executed to eliminate the coating, and holes with less burr were obtained. The coating process was executed with a spin-coating machine. To test the efficacy of the technique, two different coating thicknesses (7.9 and 5.4 μm) and two drill bits (0.25- and 0.5-mm diameter) were evaluated. Qualitative and quantitative analyses of the holes obtained were performed with scanning electron microscopy and three-dimensional microscopy, respectively. The results highlight the efficacy of the technique to reduce the burr height by 70% in coated titanium relative to that in an uncoated titanium sheet.

Enhanced antibacterial activity of titanium by surface modification with polydopamine and silver for dental implant application

Background: Biofilm formation and microbial colonization on the surface of implant devices may cause dental caries and peri-implantitis. Therefore, various surface treatments have been developed to improve the antibacterial activity of titanium implant. Methods: Silver-loaded polydopamine coating was formed by immersing pure titanium in dopamine hydrochloride/HCl buffer solution for 24 h in 50 mL silver nitrate solutions with different concentrations for 30 min. Microbial growth inhibition and microbial growth curve analyses for bacterial solutions of Streptococcus mutans and Porphyromonas gingivalis incubated with the specimens were respectively conducted by counting the numbers of colonies on agar solid medium and by measuring absorbance using enzyme-linked immunosorbent assay reader. Results: Silver nanoparticles were uniformly distributed over the whole surface of the polydopamine and silver-coated titanium specimens. The numbers of microbial colonies for both bacteria cultured with surface-modified titanium were significantly lower than those cultured with uncoated titanium. When Streptococcus mutans and Porphyromonas gingivalis were cultured with surface-modified titanium, the lag phase of the growth curves for both bacteria was continually maintained, whereas the lag phase for Streptococcus mutans and Porphyromonas gingivalis changed to exponential phase after 9 and 15 h, respectively, when both bacteria were cultured with uncoated titanium. Conclusion: It was confirmed that the coating of polydopamine and silver on the surface of titanium effectively retards the microbial growth, which can cause the formation of biofilm and pathogenesis of gum disease in the mouth.

Bioactivity of a sol–gel-derived hydroxyapatite coating on titanium implants in vitro and in vivo

BackgroundHydroxyapatite is widely used as a coating on metallic implants to promote bioactivity. The coating is typically produced using a high temperature, resulting in phase heterogeneity and coating delamination, which may lead to failure of the coating clinically. Development of a simple and low-temperature hydroxyapatite coating technique may improve the bone bonding ability of implants.ObjectivesTo investigate responses to hydroxyapatite-coated titanium produced by a newly developed sol–gel by osteoblasts in vitro and bone in vivo.MethodsOsteoblast proliferation was characterized using a methyl thiazolyl tetrazolium assay and cell calcification with an Alizarin red S assay, and the results were compared with those of uncoated titanium. Uncoated and coated screws were inserted into the trabecular bone of New Zealand white rabbit legs. These implants were evaluated mechanically and histologically after 7, 12, and 24 weeks.ResultsHydroxyapatite-coated titanium showed a significantly greater cell proliferation and mineralization than uncoated titanium. Extraction torques for the coated screws increased with time of implantation and were significantly greater than those of uncoated screws. We observed bone fragments attached to the surface of all coated screws after removal, but none on uncoated screws. Hematoxylin and eosin-stained bone showed no active inflammatory responses to implantation at any time examined. Bone surrounding either uncoated or coated screws followed typical remodeling stages, but maturation of bone healing was faster with coated screws.ConclusionsThe sol–gel-derived hydroxyapatite coating showed bioactivity, indicating its potential application as an alternative coating technique to improve the bone bonding ability of implants.

CERAMIC THIN FILMS REALIZED BY MEANS OF PULSED PLASMA DEPOSITION TECHNIQUE: APPLICATIONS FOR ORTHOPEDICS

Joint prosthesis are usually subjected to several failing mechanisms, including wear of the ultra-high molecular weight polyethylene (UHMWPE) insert. The main goal of this study was to assess the possibility to improve the tribological properties of titanium component by depositing zirconia thin films on its surface by pulsed plasma deposition (PPD) method. Zirconia-coated titanium spheres were tested against UHMWPE disks, both in dry and wet conditions. Zirconia films exhibited a homogenous sub-micrometric grain size distribution and low roughness. Interestingly, zirconia-coated titanium spheres showed lower wear rate of the UHMWPE component, compared to uncoated titanium spheres, supporting the feasibility of the proposed approach.

Effect of Nanocrystallized Hydroxyapatite Coating on Bone Healing Evaluated by Synchrotron Radiation Diffraction

The properties of the interface between biomaterials and the host tissue play an important role for the process of successful adaptation of implants. Extensive research has focused on shortening the time of osseointegration by modifying the surface in adding a coating such as hydroxyapatite (HAp). We have developed a new type of biocompatible nanohydroxyapatite (n-HAp) coatings, which are characterized before and after deposit on a Ti-6Al-4V substrate using neutron diffraction and scanning electron microscopy. Three months after the implantation in the sheep tibias, high-energy synchrotron radiation (ID15B, ESRF, Grenoble, France) diffraction studies of the cortical bone identify that the c-axes of HAp are preferentially oriented in the direction of the stresses that bone usually withstands. This non destructive analysis of the bone-implant interface proves that bone maturation is achieved successfully with this novel n-HAp coating and demonstrates that the mineralization is completed without spatial organization. None of these findings are obtained with uncoated titanium alloys. The presence of this n-HAp coating on Ti-6Al-4V substrate is decisive in obtaining this mature bone at the interface.

Improved Bone Formation in Osteoporotic Rabbits with the Bone Morphogenetic Protein-2 (rhBMP-2) Coated Titanium Screws Which Were Coated By Using Plasma Polymerization Technique

Delaying of bone fusion in osteoporotic patients underwent spinal stabilization surgery leads to screw loosening, and this causes pseudoarticulation, mobility and fibrosis at vertebral segments. To prevent these complications, the screws coated with recombinant bone morphogenetic protein-2 (rhBMP-2) could be used. To verify this hypothesis, we coated 5 Titanium screws with rhBMP-2 using plasma polymerization method, and also used 10 uncoated screws for making comparison between coated and uncoated screws in different groups. And 15 skeletally mature white New Zealand female rabbits were assigned into three different groups: Group 1(N = 5): No osteoporosis induction and insertion of uncoated Titanium screw into right sacrum of each rabbit in group 1; group 2 (N = 5): Osteoporosis induction and insertion of uncoated Titanium screw into right sacrum of each rabbit in group 2; group 3 (N = 5) rhBMP-2 coated Titanium screw inserted into right sacrum of each rabbit in group 3. In summary, using of these coated screws provides new bone formation, but causes less fibrosis and less inflammation than uncoated screws at the interface between the coated screw and bone. Then the plasma polymerization technique provides controlled releasing of rhBMP-2 from the screw to the bone tissue in osteoporotic rabbits.

Fibronectin Absorbed onto TiN-coated and Uncoated Titanium Alloy Implants Enhances Osseointegration in the Rat Femur.

Extended abstract of a paper presented at Microscopy and Microanalysis 2009 in Richmond, Virginia, USA, July 26 – July 30, 2009

SURFACE MODIFICATION AND CHARACTERIZATIONS OF TiO2 NANOPARTICLE

Nanosized titanium dioxide particles were engrafted with butyltitanate coupling agent and methylmethacrylate monomer, and the obtained nanocomposite was characterized by Fourier transform infrared spectra and sedimentation test. Ultraviolet-visible light spectroscopy was used to study the differences and effectiveness of the coated and uncoated titanium dioxide, respectively. The results showed that polymethacrylate chain was engrafted on the surface of nanosized titanium dioxide and the surface grafting of polymers improved significantly absorbency of ultraviolet light of the nanoparticles.