Head/skull injury potential of empty 0.5-l beer glass bottles vs. 0.33-l Coke bottles

The medical and biomechanical assessment of injuries from blows to the head is a common task in forensic medicine. In the context of a criminal justice process, the injury potential of different striking weapons is important. The article at hand compares the injury potential of assaults with a 0.5-l beer bottle and a 0.33-l Coke bottle, both made of glass. The research team hit 30 used empty 0.5-l beer bottles and 20 used empty 0.33-l Coke bottles manually on an aluminum dummy skull set on a force measuring plate, using acrylic and pork rind as a scalp surrogate. There was no significant difference in fracture threshold and energy transfer between the examined beer and Coke bottles. Both glass bottles are able to cause fractures to the facial bones while cranial bone fractures are primarily not to be expected. Blows with a 0.5-l beer bottle or with a 0.33-l Coke bottle to the head can transfer up to 1.255 N and thus are able to cause severe blunt as well as sharp trauma injuries.

Tahanan Penetrasi Tanah Terhadap Penekanan Plat Dengan Sudut Penekanan dan Ukuran Plat yang Berbeda di Sawah

Penelitian dilakukan di Desa Lubuk Bayas Kecapamatan Perbaungan Kabupaten Serdang Bedagai pada lahan sawah bertekstur lempung berpasir dengan kadar air 49.17% dan dry bulk density 1.26 g/cm3. Tahanan penetrasi tanah ditentukan melalui pengukuran tahanan penetrasi plat dengan menggunakan penetrometer secara langsung di sawah. Pengukuran dilakukan dengan ukuran plat 5x5 cm2, 5x10 cm2, 5x15 cm2 dan 5x20 cm2. Sudut penekanan 90o, 75o, 60o, 45o, 30o dan kedalaman penekanan 4 cm, 8 cm, 12 cm, 16 cm dan 20 cm. Dari hasil pengukuran diperoleh bahwa semakin besar ukuran plat maka gaya penekanan semakin besar namun tahanan penetrasi tanah semakin kecil. Sedangkan semakin dalam plat masuk ke tanah maka tahanan penetrasi tanah semakin besar. Semakin besar sudut penekanan tahanan penetrasi tanah semakin besar. Untuk ukuran plat, sudut tekan dan kedalaman penekanan plat yang sama pada kedalaman lumpur yang berbeda akan menghasilkan gaya penekanan dan tahanan penetrasi tanah yang berbeda. The study was conducted in Lubuk Bayas Village, Perbaungan Subdistrict, Serdang Bedagai District, in paddy fields with sandy clay texture with a water content of 49.17% and dry bulk density of 1.26 g / cm3. Soil penetration resistance iwas determined by measuring plate penetration resistance using a penetrometer directly in the rice field. Measurements were made with a plate size of 5x5 cm2, 5x10 cm2, 5x15 cm2 and 5x20 cm2. The angle of emphasis was 90o, 75o, 60o, 45o, 30o and the depth of emphasis was 4 cm, 8 cm, 12 cm, 16 cm and 20 cm. Results showed that the larger the plate size found, the greater the compressive force, but the penetration resistance of the soil got smaller. Whereas the deeper the plate entered the ground, the greater the penetration resistance of the soil occurred. The greater the angle of suppression the greater the penetration penetration of the soil. For the plate size, the pressure angle and depth of the same plate compression at different mud depths will result in a different force of suppression and soil penetration resistance.

Development of Multichannel Data Acquisition System Based on Wheel Load Measuring Plate

The wheel load measuring plate is a force sensor based on strain measurement, it can bear simultaneously multidimensional force load and identify radial wheel load by decoupling. The measuring plate can output multichannel voltage signal, usually each channel has the properties of weak signal, strong noise, poor anti-jamming ability. The paper discusses the development of a multichannel data acquisition system for the wheel load measuring plate and conducts the experimental verification, through the data acquisition system achieve time-sharing acquisition of multichannel data, improving the precision and anti-jamming ability of wheel load measurement system.