A Mini-Review on Nanostructured g-C3N4 Photocatalysts for Solar Fuel Production

Graphitic carbon nitride (g-C3N4) is an important photocatalytic material that receives a lot of research attention globally. This is because of its favourable thermal and chemical stability as well as electronic band structure. However, the photocatalytic performance of the bulk g-C3N4 is limited by fast recombination of electron-hole pair and poor visible light-harvesting ability. Thus, different strategies, such as heterostructuring, nanotuning, doping, etc., have been adopted to overcome the aforementioned challenges to enhance the photocatalytic performance of g-C3N4. In recent times, various nanostructured g-C3N4 photocatalytic materials with various tuned morphologies have been designed and fabricated in literature for different photocatalytic activities. This mini-review summarized the progress development of nanostructured g-C3N4 photocatalysts with various tuned morphologies for solar fuel generation. The article briefly highlights the research status of various g-C3N4 with tuned morphologies and enhanced solar fuel generation abilities. Finally, a conclusion and future research were also suggested, opening up new areas on g-C3N4 photocatalysis.

Zinc oxide hollow spheres decorated with cerium dioxide. The role of morphology in the photoactivity of semiconducting oxides

The photochemical activity of the recently proposed CeO2-ZnO photocatalytic material active under visible light has been improved by means of significant modifications of its morphology. A polymeric templating agent (Pluronic) has been used in the synthesis obtaining a particle morphology based on hollow spheres that is better defined in the case of high template concentration. The charge separation ability and the light-induced surface electron transfer under irradiation with visible polychromatic light in various ranges of frequency has been investigated by Electron Paramagnetic Resonance. The reactivity of the photogenerated holes has been monitored by the spin trapping technique in the presence of DMPO. The hollow spheres morphology achieved through the synthesis here reported leads to systems with a higher photoactivity under visible irradiation than the same system displaying the classic platelets morphology. A parallel increase of the photocatalytic activity of this novel system in pollution remediation reactions is therefore predictable.

Enhanced Catalytic Activities of TiO2 Nanotube Arrays Co-Sensitized with Pt/CdS/ZnS via Electrodeposition and Successive Ionic Layer Adsorption and Reaction (SILAR) Method Approach

In this work, we have synthesized a nanocomposite ZnS/CdS/Pt/TiO2 nanotube arrays (denoted ZCP-NTAs). Firstly, TiO2 nanotube array (NTAs) material was fabricated by the anodic method of a titanium plate in an electrolyte solution containing 0.35 M NaHSO4 and 0.24 M NaF and incubated in the air at 500 ºC for 2 hours. After that, pulsed electrodeposition technology was used to decorate platinum nanoparticles (denoted as Pt NPs) onto the surface of TiO2 nanotubes to form P-NTAs photoelectrodes. Then, the SILAR method is used to deposition CdS quantum dots (symbolized as CdS QDs) on the surface of P-NTAs to form CP-NTAs material. Finally, by the SILAR method, a ZnS passive layer that protects against optical corrosion and inhibits recombination of e−/h+ pairs was coated onto the CP-NTAs to form ZCP-NTAs material. As-prepared ZCP-NTAs photocatalytic material has good absorbability of light in the visible region with light absorption wavelength up to 608 nm, photon conversion efficiency up to 5.32% under light intensity AM1.5G, and decomposition efficiency of 10 mg L−1 methyl orange (MO) in 120 minutes reached 91.50%. This material promises to bring high application ability in the photocatalytic field applied for environmental treatment and other applications.

Research Progress of Adsorption and Photocatalysis of Formaldehyde on TiO2/AC

Based on the increasingly serious formaldehyde pollution, effective degradation of formaldehyde has become a practical problem that humans urgently need to solve. Among many treatment methods, activated carbon has the advantages of large specific surface area, high adsorption efficiency, and uniform pore size distribution. As a kind of clean photocatalytic material for formaldehyde degradation, titanium dioxide supported by activated carbon has become a research hotspot to develop adsorption-catalytic materials for formaldehyde degradation. In this paper, the research progress of activated carbon and its modification, the photocatalytic principle and modification of titanium dioxide, and TiO2/AC materials are reviewed. The results show that the pore size distribution gradient and acidic oxygen-containing functional groups of activated carbon play key roles in the formaldehyde adsorption process. TiO2 doped with metal ions and nonmetal ions can significantly improve the photocatalytic activity. The TiO2/AC material can greatly improve the photocatalytic rate and achieve the technical goal of efficient and clean degradation for formaldehyde.

Morphology-Governed Performance of Multi-Dimensional Photocatalysts for Hydrogen Generation

In the past few decades, extensive studies have been performed to utilize the solar energy for photocatalytic water splitting; however, up to the present, the overall efficiencies reported in the literature are still unsatisfactory for commercialization. The crucial element of this challenging concept is the proper selection and design of photocatalytic material to enable significant extension of practical application perspectives. One of the important features in describing photocatalysts, although underestimated, is particle morphology. Accordingly, this review presents the advances achieved in the design of photocatalysts that are dedicated to hydrogen generation, with an emphasis on the particle morphology and its potential correlation with the overall reaction performance. The novel concept of this work—with the content presented in a clear and logical way—is based on the division into five parts according to dimensional arrangement groups of 0D, 1D, 2D, 3D, and combined systems. In this regard, it has been shown that the consideration of the discussed aspects, focusing on different types of particle morphology and their correlation with the system’s efficiency, could be a promising route for accelerating the development of photocatalytic materials oriented for solar-driven hydrogen generation. Finally, concluding remarks (additionally including the problems connected with experiments) and potential future directions of particle morphology-based design of photocatalysts for hydrogen production systems have been presented.

Oxygen and methyl co-modified carbon nitride for enhanced photocatalytic dagradation

Carbon nitride (C3N4) is a promising photocatalytic material to degrade various pollutants. However, the degradation activity is restricted by the limited light absorption and fast recombination of photoinduced carriers. Herein, a structure modification strategy by introducing a functional reagent during the polymerization process was adopted. The structure, composition and morphology of prepared materials were investigated by X-ray diffraction, X-ray photoelectron spectroscopy and scanning electron microscopy. Benefiting from the implantation of oxygen and methyl groups in triazine unit of C3N4, enhanced light absorption and effective carrier separation are achieved. As a result, the modified C3N4 exhibits a significant enhanced degradation activity and the optimal rate constant of modified C3N4 for Acid Red 9 degradation is 5.83 times that of pristine C3N4. The work demonstrates the effect of structure modification in C3N4 for enhancing degradation activity.

Hollow Dodecahedra Graphene Oxide- Cuprous Oxide Nanocomposites With Effective Photocatalytic and Bactericidal Activity

In this study, a kind of graphene oxide-cuprous oxide (GO-Cu2O) nanocomposites was fabricated with different morphologies to serve as a photocatalytic material for the degradation of organic/inorganic dyes under visible light and the bactericidal effect against pathogenic bacteria. The GO-Cu2O was prepared with solid cube and hollow dodecahedra morphologies through in-situ synthesis, and characterized by scanning electron microscopy (SEM), transmission electron microscope (TEM), X-ray diffraction (XRD), Raman, Ultraviolet and visible spectrophotometry (UV/vis), and Fourier transform infrared spectroscopy. In comparison with cubic GO-Cu2O, the absorption and degradation efficiency of the GO-Cu2O dodecahedra (GCD) composite in Methyl orange (MO), Rhodamine B (RhB), and phenol was higher owning to the more active sites for the simultaneous dye and light absorption of hollow structure. The antibacterial effect of the GO-Cu2O dodecahedra was examined by the flat colony counting method with an excellent bactericidal effect against pathogenic bacteria. The possible mechanism for the preparation of GCD possessing the enhancement of the visible-light photocatalytic and antibacterial efficiencies were also investigated.