propellant performance
Recently Published Documents


TOTAL DOCUMENTS

23
(FIVE YEARS 4)

H-INDEX

3
(FIVE YEARS 0)

2021 ◽  
Vol 6 (2) ◽  
pp. 051-060
Author(s):  
Oyedeko K.F.K ◽  
Egwenu S. O

This research work aimed at investigating the effects of magnesium metal (powder) and carbon on a potassium nitrate-sucrose (KNSU) solid propellant formulation. Characterization of propellant is very important to determine its performance before it can be suitable for use for a rocket flight or any mission. Ballistic loadcell method was used. The ballistic load cell instrumentation measured the thrust generated by the propellant, the propellant burn time and the exit temperature of the burning hot propellant gases. The carbon constituent which acts as an opacifier and coolant was kept constant at 2% in order to arrest some of the heat during the combustion process and helped to lower the combustion temperature, because high combustion temperature could lead to combustion chamber rupture or failure. Also, carbon was not increased beyond 2%, so as not to make the propellant excessively smoky because of presence of magnesium oxide and other solids in the combustion products that can cause air pollution, and could be harmful to human lives and the environment. The propellant specific impulse (117.9s), combustion temperature (1818K), heat ratio (1.1508), propellant molecular weight (38.88g/mole), propellant density (1874.6kg/m3), characteristics velocity (997.2m/s) and burn rate (0.00906m/s) were obtained. The effect of addition of magnesium which was optimized for 3% in the formulation contributed significantly in improving the overall performance of the propellant as parameters such as the specific impulse, chamber temperature, characteristics velocity and heat ratio were found to have higher values as compare to the KNSU propellant when magnesium was not present in the formulation. Basically, higher values of these parameters suggest better propellant performance. Also, in this case, when carbon was increased beyond 2%, the propellant was excessively smoky because of presence of magnesium oxide and other solids in the combustion products that can cause air pollution, and could be harmful to human lives and the environment.


2021 ◽  
Author(s):  
Roy J. Hartfield ◽  
Mark Carpenter ◽  
Noel Cervantes ◽  
Jordan Eckert

Author(s):  
THELMA MANNING ◽  
JEFFREY WYCKOFF ◽  
KENNETH KLINGAMAN ◽  
VIRAL PANCHAL ◽  
EUGENE ROZUMOV ◽  
...  

2017 ◽  
Vol 13 (3) ◽  
pp. 131-142
Author(s):  
Thelma Manning ◽  
Jeffrey Wyckoff ◽  
Kenneth Klingaman ◽  
Viral Panchal ◽  
Eugene Rozumov ◽  
...  

2017 ◽  
Vol 17 (1) ◽  
pp. 44-57
Author(s):  
J. O. Hamed ◽  
O. O. Ogunleye ◽  
C. A. Osheku

Abstract There is a continuous demand for high performance composite propellant formulations to meet mission requirements. The performance of composite propellant formulations can be enhanced by optimizing propellant formulation. However, the main objective of this study is to formulate a composition for composite propellant by optimizing the specific impulse which is the measure of propellant performance. A central composite design (ccd) consisting five ingredients (ammonium nitrate, powdered aluminum, polyester resin, ammonium dichromate and powdered charcoal) at five levels was used to formulate optimum propellant formulation from composite materials of ammonium nitrate based propellant verified for propellant characteristics using propellant performance evaluation programme (propep 3). The responses evaluated are specific impulse, characteristic velocity, density, temperature and molecular weight. Response surface methodology was used to analyze the results of the ccd of the composite formulations. The optimum values for specific impulse, characteristic velocity, density, temperature and molecular weight of the mixture from the surface plot are 212.178 s, 1335.81 m/s, 1640.6 k g/m3, 1968.73 k and 21.7722 g/mol respectively. The optimum predicted specific impulse was 212.178 s at composite composition of 73.61% ammonium nitrate, 4.36% powdered aluminum, 14.39% polyester resin, 5.10% ammonium dichromate and 2.54% powdered charcoal. The propellant optimum composition validated with propep 3 are in good agreement with each other in their accompany propellant characteristics. Therefore, the optimal propellant formulation enhanced the performance of solid propellants.


Sign in / Sign up

Export Citation Format

Share Document