Effect of device structure on signal measurement of zinc oxide nanocolumn-based resonant cavity hydrophones

Hydrophones with three different resonant cavities (microscope slide, cavity with 9.8 mm diameter and 5.7 mm[Formula: see text] curve surface, and cavity with 14 mm diameter and 6.5 mm[Formula: see text] curve surface) and with two different electrode structures (interdigital electrode, without the interdigital electrode but with top–bottom structure) were designed and fabricated. Zinc oxide (ZnO) film was deposited on indium–tin oxide/glass as seed layer and ZnO nanocolumns were grown as the piezoelectric material. Grown ZnO nanocolumns were used in all samples as the sound receiver of all designed hydrophones to enhance the sensing effect and efficiency of fabricated hydrophones. The electrode mask was then adhered on the surfaces of ZnO nanocolumns to complete the electrodes of designed resonant cavity. While measuring the hydrophones without interdigitated electrode, the measurement probes were contacted directly on the substrate and on the top layer of the material. Finally, the resonant cavities in all designed hydrophones were encapsulated using epoxy resin to finish the package of the fabricated hydrophones, and then the sound receiving performance of the hydrophones was evaluated in the water and the results were well compared in this study.

Electrodeposited Gold Nanostructures for the Enhancement of Electrochromic Properties of PANI–PEDOT Film Deposited on Transparent Electrode

Conjugated polymers (CPs) are attractive materials for use in different areas; nevertheless, the enhancement of electrochromic stability and switching time is still necessary to expand the commercialization of electrochromic devices. To our best knowledge, this is the first study demonstrating the employment of electrodeposited gold nanostructures (AuNS) for the enhancement of CPs’ electrochromic properties when a transparent electrode is used as a substrate. Polyaniline–poly(3,4-ethylenedioxythiophene) (PANI-PEDOT) films were electrodeposited on a transparent indium tin oxide glass electrode, which was pre-modified by two different methods. AuNS were electrodeposited at −0.2 V constant potential for 60 s using both the 1st method (synthesis solution consisted of 3 mM HAuCl4 and 0.1 M H2SO4) and 2nd method (15 mM HAuCl4 and 1 M KNO3) resulting in an improvement of optical contrast by 3% and 22%, respectively. Additionally, when using the 1st method, the coloration efficiency was improved by 50% while the switching time was reduced by 17%. Furthermore, in both cases, the employment of AuNS resulted in an enhancement of the electrochromic stability of the CPs layer. A further selection of AuNS pre-modification conditions with the aim to control their morphology and size can be a possible stepping stone for the further improvement of CPs electrochromic properties.

Using a Dielectrophoretic Microfluidic Biochip Enhanced Fertilization of Mouse Embryo in Vitro

Droplet microfluidics has appealed to many interests for its capability to epitomize cells in a microscale environment and it is also a forceful technique for high-throughput single-cell epitomization. A dielectrophoretic microfluidic system imitates the oviduct of mammals with a microchannel to achieve fertilization in vitro (IVF) of an imprinting control-region (ICR) mouse. We applied a microfluidic chip and a positive dielectrophoretic (p-DEP) force to capture and to screen the sperm for the purpose of manipulating the oocyte. The p-DEP responses of the oocyte and sperm were exhibited under applied bias conditions (waveform AC 10 Vpp, 1 MHz) for trapping 1 min. The insemination concentration of sperm nearby the oocyte was increased to enhance the probability of natural fertilization through the p-DEP force trapping. A simulation tool (CFDRC-ACE+) was used to simulate and to analyze the distribution of the electric field. The DEP microfluidic devices were fabricated using poly (dimethylsiloxane) (PDMS) and ITO (indium tin oxide)-glass with electrodes. We discuss the requirement of sperm in a DEP microfluidic chip at varied concentrations to enhance the future rate of fertilization in vitro for an oligozoospermia patient. The result indicates that the rate of fertility in our device is 17.2 ± 7.5% (n = 30) at about 3000 sperms, compatible with traditional droplet-based IVF, which is 14.2 ± 7.5% (n = 28).

Room-temperature high-performance ammonia gas sensor based on hydroxyapatite film

A room-temperature high-performance ammonia (NH3) gas sensor based on hydroxyapatite (HAp) film with three-dimensional network structure was reported in this paper. The gas sensor was fabricated on the indium tin oxide glass (ITO) interdigital electrode via simple electrochemical deposition technique. The HAp film gas sensor shows good sensitivity, high reproducibility and excellent selectivity to NH3 gas under dry and relative humidity (RH) conditions at room temperature. The response and recovery time of the HAp film gas sensor to 1000 ppm NH3 gas are 23 s and 14 s under N2 (dry) condition, and are 4 s and 11 s under air (RH≈30) condition, respectively. The HAp film gas sensor has no considerable deviation in the 1000 ppm NH3 gas for 3 cycles under N2 (dry), and so is air (RH≈30) conditions. The HAp film gas sensor shows excellent selectivity to methanol, acetone and ethanol under N2 (dry) and air (RH≈30) conditions. Above all, two sensing mechanisms of the HAp film gas sensor to NH3 gas have been also researched in this work.