Fracture Resistance of Roots Obturated with Resilon and EndoREZ with Self-Adhesive Root Canal Sealers

<sec> <title>Objective:</title> This laboratory study aimed to evaluate the effect of self-adhesive root canal sealers on the fracture strength of root canals filled with Resilon or EndoREZ. </sec> <sec> <title>Materials and Methods:</title> A total of eighty extracted mandibular premolar teeth were selected in this in-vitro study. All teeth were instrumented using a crown-down technique by FlexMaster rotary NiTi files. Specimens were divided into 4 test groups (n = 20) according to the sealer material: RS; RealSeal, RSS; RealSeal SE, MS; MetaSeal, and CG; (control group) zinc oxide eugenol-based sealer. Each main group was distributed into two subgroups (n = 10) according to the filling material either Resilon or EndoREZ and gutta-percha (n = 20) in the control group. Each root was mounted in acrylic resin blocks and subjected to fracture in a universal testing machine. The load values at root specimens fractured were registered in Newton’s and the data were analyzed using two-way analysis of variance and the Tukey HSD test (α = 0.05). </sec> <sec> <title>Results:</title> The two-way analysis of variance analysis indicated that the filling material had a significant effect on the fracture strength of endodontically treated teeth (p < 0.05) but not the sealer materials (p≥.05). Higher mean fracture strength was recorded in MetaSeal and Resilon group (1281.90±200.34 N) and lower mean fracture strength was shown in RealSeal and EndoREZ group (847.55±191.04 N). </sec> <sec> <title>Conclusion:</title> Self-adhesive (fourth-generation) resin sealers increased the fracture strength of root teeth more than self-etching (third-generation) root canal sealers when used with EndoREZ points. </sec>

Impact of Water Solubility on Chemical Composition and Surface Structure of Two Generations of Bioceramic Root Canal Sealers

Aimed to evaluate the effect of water solubility on chemical properties and surface structure of bioceramic-based (BC-HiFlow and BC-EndoSeqence) compared with resin-based (Adseal) root canal sealers. Fresh mix was inserted into polyethylene mold (n = 10) and subjected to Vicat needle to evaluate the setting time. The set discs were analyzed by Fourier transform infrared (FTIR) spectroscopy then immersed in deionized water for 1, 7, 14 and 28 days. The solubility%, pH changes, released calcium (Ca2+), phosphate (PO43−) and silicon (Si4+) ions were evaluated after each immersion period. The discs were analyzed by scanning electron microscopy/Energy dispersed X-ray (SEM/EDX) before and after solubility test. Although FTIR detected similar composition of both bioceramic-sealers, BC-EndoSequence determined the prolonged setting times. At the end of solubility test, both bioceramic-sealers exhibited significant greater solubility (>3%), alkaline pH (>11) at p < 0.001. Adseal displayed the significant greatest Ca2+ and PO43− released, while BC-HiFlow displayed the significant greatest Si4+ release (p < 0.001). SEM revealed voids and pores on the surface of all tested sealers with the greatest value on Adseal surface. In conclusion, although both bioceramic-sealers had high solubility, BC-Hiflow complied the ISO standard regarding setting time and least surface micropores better than that of BC-EndoSequence.

The evaluation of cytotoxicity and cytokine IL-6 production of root canal sealers with and without the incorporation of simvastatin: an invitro study

Background Freshly mixed root canal sealers when proximate the periapical tissues, trigger varying degrees of cytotoxicity/inflammatory reactions. Simvastatin, a class of the drug statin, is a widely used cholesterol-lowering agent with additional anti-inflammatory activities. This study assessed the effects of simvastatin on cytotoxicity and the release of IL-6 (Interleukin-6) production when incorporated in zinc oxide eugenol and methacrylate resin-based sealers. Methods Experimental groups consisted of conventional zinc oxide eugenol and methacrylate based-EndoREZ sealers (ZE & ER respectively) and 0.5 mg/mL simvastatin incorporated sealers (ZES & ERS). L929 mouse fibroblast cells were exposed to freshly mixed experimental sealers and evaluated for cytotoxicity (MTT assay) and inflammation levels (inflammatory marker IL-6 for ELISA) at various time intervals (0h, 24h and 7th day). The values were compared to the cell control (CC; L929 cells alone) and solvent control (SC; L929 cells + DMSO) groups. All the experiments were conducted in triplicates and subjected to statistical analysis using IBM SPSS Statistics software. Non parametric tests were conducted using Kruskal-Wallis and Friedman tests for inter-group and intra-group comparisons respectively. Pairwise comparison was conducted by post hoc Dunn test followed by Bonferroni correction. P values < 0.05 were considered statistically significant. Results All the experimental groups (ZE, ER, ZES, ERS) exhibited varying degree of cytotoxicity and IL-6 expression compared to the control groups CC and SC. The cell viability for ZE and ER decreased on day 7 as compared to 24 h. ZES and ERS had higher viable cells (75.93% & 79.90%) compared to ZE and ER (54.39% & 57.84%) at all time periods. Increased expression of IL-6 was observed in ZE & ER (25.49 pg/mL & 23.14 pg/mL) when compared to simvastatin incorporated ZE & ER (ZES-12.70 pg/mL & ERS-14.68 pg/mL) at all time periods. Highest level of cytotoxicity and inflammation was observed in ZE compared to all the other groups on day 7. Conclusions Addition of 0.5 mg/mL of simvastatin to the sealers (ZES and ERS) decreased the cytotoxicity in the freshly mixed state and reduces their inflammatory effect.

Comparative evaluation of radiographic density of different endodontic material

The purpose of this study was to evaluate and compare the densities of four different brands of root canal sealers using three different intraoral imaging receptors. Four different root canal sealers used were – AH Plus (Dentsply Germany, Resin based), Epiphany (Pentron USA, Resin based), U/P (Sultan Healthcare, Zinc oxide eugenol based) and Apexit (Ivoclar / Vivadent, Calcium hydroxide based). The sealers were mixed according to manufacturer instructions and six specimens of each material were fabricated. All the specimens were imaged using three different intraoral #2 sized imaging receptors-D and E speed film and storage phosphor plates. D and E speed films were digitized and stored in JPEG format. All the images were exported into the Image J software (rsb.info.nih.gov/ij/) and the mean grey values and integrated density of each material was calculated from four random areas of each image and averaged. Mixed model ANOVA was performed. Pair wise comparison of mean grey values between the three imaging receptors and integral densities recorded by the receptors showed high statistical significance for all the four different root canal sealers. Results showed that the four different types of root canal sealers showed different optical densities on all the three receptors. The purpose of this study is to evaluate and compare the optical densities of four different brands of root canal sealers using three different intraoral imaging receptors.

An in vitro study on the effects of serum proteins on Enterococcus faecalis adhesion to three types of root sealers and gutta-percha

Background The extrusion of overfilled materials that extend beyond the apical foramina into the periradicular tissue may serve as a reservoir for bacterial adhesion and further affect recovery from periapical diseases. The aim of this study was to evaluate the effects of serum proteins on Enterococcus faecalis adhesion and survival on the surface of a calcium hydroxide-based root canal sealer (Apexit Plus), an epoxy resin sealer (AH-Plus) and a bioceramic sealer (iRoot SP). Methods Apexit Plus, AH-Plus and iRoot SP were evenly coated on gutta-percha, using gutta-percha alone as the control. After root canal sealer setting, the number of E. faecalis adhering to the root canal sealers and gutta-percha was counted in fetal bovine serum (FBS) or tryptic soy broth supplemented with 1% glucose (TSBG) by viable cell plate counts. The morphology of 7-day-old E. faecalis biofilms in FSB and TSBG was observed by scanning electron microscopy (SEM). Furthermore, E. faecalis biofilms on the three root canal sealers were labeled with a LIVE/DEAD BacLight™ Bacterial Viability Kit, and the ratios of viable to dead cells were analyzed using laser scanning microscopy operative software (Zen software). Results In the assays, after 1 and 7 days, the number of E. faecalis adhering to the root canal sealers or gutta-percha in FBS were significantly lower than those in TSBG (P < 0.05). In FBS, E. faecalis adhesion to iRoot SP and gutta-percha was reduced to a greater extent than that adhered to Apexit Plus and AH-Plus. Few E. faecalis accumulated on iRoot SP in FBS, whereas many bacteria assembled on iRoot SP and formed biofilms in TSBG. The ratio of viable cells in the E. faecalis biofilm on iRoot SP was the lowest. Conclusions Calcium hydroxide-based root canal sealers, epoxy resin sealers and bioceramic sealers may provide a substrate for E. faecalis adhesion, and the bioceramic sealer in this study showed the least E. faecalis adhesion in the presence of serum proteins compared to the other two sealers.

The Effect of Different Final Irrigation Regimens on the Dentinal Tubule Penetration of Three Different Root Canal Sealers: A Confocal Laser Scanning Microscopy Study In Vitro

This study evaluated the effects of different final irrigation regimens on the dentin tubule penetration of three different root canal sealers using confocal laser scanning microscopy (CLSM). A total of 160 single-rooted extracted mandibular premolar teeth were divided into five groups ( n = 32 each) according to the solution used in the final rinse protocol, as follows: 17% ethylenediaminetetraacetic acid (EDTA) (group 1), 17% EDTA and 2% chlorhexidine gluconate (CHX) (group 2), 7% maleic acid (MA) (group 3), 7% MA and 2% CHX (group 4), and 5.25% NaOCl (group 5). Two roots from each group were examined under scanning electron microscopy (SEM) to visualize smear layer removal. Experimental groups were then split randomly into three subgroups ( n = 10 ) and obturated using a cold lateral condensation technique with 0.1% rhodamine B-labelled sealers [either AH Plus (group A), EndoREZ (group E), or Tech BioSealer Endo (group T)] and gutta-percha. Specimens were sectioned and observed by CLSM to evaluate the percentage and maximum depth of sealer penetration at the apical, middle, and coronal levels. Statistical comparison was performed on grouped (apical, middle, and coronal segments) and ungrouped data using two-way ANOVA with Bonferroni post hoc test ( p < 0.01 ). AH Plus showed the greatest tubule penetration while Tech BioSealer Endo showed the least. Resin-based sealers displayed deeper and more consistent penetration. CHX irrigation positively influenced sealer tubule penetration.

Physicochemical Properties of Two Generations of MTA-Based Root Canal Sealers

This study evaluated the physicochemical properties and the effect of solubility on the surface morphology and composition of the root canal sealers MTA-Bioseal, MTA-Fillapex, and Adseal. Discs (n = 10) of freshly mixed sealer were prepared and then analyzed by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy/energy-dispersive X-ray spectroscopy (SEM/EDX). The discs were immersed for 1, 7, 14, and 28 days in deionized water. The solubility %; pH change of the solution; and released calcium, phosphate, and silicon were measured for each period. The flowability and film thickness were also evaluated. Changes in the surface morphology and composition after 28 days of immersion were evaluated by SEM/EDX. The data were statistically analyzed by one-way ANOVA at p < 0.05. The FTIR and EDX results revealed similar compositions of MTA-Bioseal and MTA-Fillapex, but with different concentrations. The two MTA-based sealers had higher solution alkalinity (pH > 10) than Adseal (pH ≈ 8.5). MTA-Fillapex exhibited the highest solubility % and the largest calcium and silicon ion release. MTA-Bioseal had the highest phosphate ion release. After 28 days, the sealer surfaces showed large micropores, with larger pores in MTA-Fillapex. Adseal had an intermediate flowability but exhibited the greatest film thickness. Finally, the highest solubility and largest amount of silicon release was exhibited by MTA-Fillapex, which might predispose it to the development of large micropores, compromising the apical seal of obturation.