Thermal Modelling and Multi Decision Making Optimization of EDM of Non Conductive SiC-CNT Ceramic Composite Used for Li-ion Battery and Sensor

In this research work the thermal modeling of a nonconductive Silicon carbide Ceramic matrix composite (CMC) machined by Die Sinking Electric Discharge Machining (EDM) has been done. Though SiC is a non-conductive material but the presence of CNT makes it a conductive material which can be machined with EDM. The modeling procedure carried out by considering some realistic approach like Gaussian heat Flux, Specific Discharge Energy, Variable Latent heat etc. For this analysis a 2D continuum has been designed as work domain. By simulating the work domain model by a Finite Element Analysis (FEA) Software (COMSOL), material removal rate (MRR) has been estimated with variable thermal properties. Parametric analysis of effect of Variable Specific heat on MRR by considering different current, Voltage and Pulse-On time has been performed. The effect of different input parameters (peak current and Pulse-on time) on Crater geometry has been done. A new concept of Specific discharge energy has been introduced during modelling to make it a more realistic model which can also be used as electrode support for electrochemical energy devices as Polymer Electrolyte Membrane Fuel Cells on Li-ion battery. Desirability analysis has been done to get an optimize set of input parameters for I= 3A, V=30V, Ton= 75 µs for machining ceramic matrix composite by EDM. The optimized MRR at this setting is 7.25 mm3/min whereas PFE is 87%. The experimental analysis has been also performed to strengthen the thermal and mathematical modelling.

Calculation of the parameters of the magnetic-pulse connection of the tip and multi-wire cable

The main provisions of the calculation method and the results of numerical modeling of the process of compression of the tubular shell of the tip onto a stranded wire by the pressure of a pulsed magnetic field are presented. The analysis of the features of the deformation process at different intensity of force loading is carried out. The rational modes of loading and the necessary conditions for minimizing the specific discharge energy while ensuring a high assembly density are determined.