Influence of accessory phases and surrogate type on accelerated leaching of zirconolite wasteforms

A fraction of the UK Pu inventory may be immobilised in a zirconolite ceramic matrix prior to disposal. Two zirconolite compositions, targeting CaZr0.80Ce0.20Ti2O7 and CaZr0.80U0.20Ti2O7, were fabricated by hot isostatic pressing, alongside a reformulated composition, nominally Ca0.80Zr0.90Ce0.30Ti1.60Al0.40O7, with an excess of Ti and Zr added to preclude the formation of an accessory perovskite phase. Materials were subjected to accelerated leaching in a variety of acidic and alkaline media at 90 °C, over a cumulative period of 14 d. The greatest Ce release was measured from CaZr0.80Ce0.20Ti2.00O7 exposed to 1 M H2SO4, for which 14.7 ± 0.2% of the original Ce inventory was released from the wasteform into solution. The extent of Ce leaching into the solution was correlated with the quantity of perovskite present in the wasteform, and associated with the incorporation and preferential dissolution of Ce3+. CaZr0.80U0.20Ti2.00O7 exhibited improved leach resistance relative to CaZr0.80Ce0.20Ti2.00O7, attributed to the decreased proportion of accessory perovskite, with 7.1 ± 0.1% U released to in 8 M HNO3 after 7 d. The Ca0.80Zr0.90Ce0.30Ti1.60Al0.40O7 composition, with no accessory perovskite phase, presented significantly improved leaching characteristics, with < 0.4%Ce released in both 8 M HNO3 and 1 M H2SO4. These data demonstrate the need for careful compositional design for zirconolite wasteforms with regard to accessory phase formation and surrogate choice.

Hierarchical Modeling of HLW Glass-Gel-Solution Systems for Stage 3 Glass Degradation

ABSTRACTThe necessity to a priori predict the durability of high level nuclear waste (HLW) glasses on extended time scales has led to a variety of modeling approaches based primarily on solution (leachate) concentrations. The glass composition and structure control the leachate and the gel compositions which in turn control what reaction products form: the leached layer is a hydrogel and reacts with the solution (leachate) to form secondary phases some of which cause accelerated glass dissolution which is undesirable. Glasses with molar excess alkali that is not bound to glass forming (Al,Fe,B)O4 structural groups in the glass resume accelerated leaching. The hydrogels of the glasses that resume accelerated leaching at long times contain excess alkali and the leachates contain excess strong base, [SB]ex. The [SB]ex further accelerates aluminosilicate gel aging into analcime with time. Glasses with no excess molar structural alkali do not resume accelerated leaching: the glass generates weak acids, [WA], in the leachate favoring hydrogel aging into clays. These data indicate that the gel layer transforms to secondary phases in situ in response to interactions with the chemistry of a continuously evolving leachate.