Can sterilization of disposable face masks be an alternative for imported face masks? A nationwide field study including 19 sterilization departments and 471 imported brand types during COVID-19 shortages

Background Face masks, also referred to as half masks, are essential to protect healthcare professionals working in close contact with patients with COVID-19-related symptoms. Because of the Corona material shortages, healthcare institutions sought an approach to reuse face masks or to purchase new, imported masks. The filter quality of these masks remained unclear. Therefore, the aim of this study was to assess the quality of sterilized and imported FFP2/KN95 face masks. Methods A 48-minute steam sterilization process of single-use FFP2/KN95 face masks with a 15 minute holding time at 121°C was developed, validated and implemented in the Central Sterilization Departments (CSSD) of 19 different hospitals. Masks sterilized by steam and H2O2 plasma as well as new, imported masks were tested for particle filtration efficiency (PFE) and pressure drop in a custom-made test setup. Results The results of 84 masks tested on the PFE dry particle test setup showed differences of 2.3±2% (mean±SD). Test data showed that the mean PFE values of 444 sterilized FFP2 face masks from the 19 CSSDs were 90±11% (mean±SD), and those of 474 new, imported KN95/FFP2 face masks were 83±16% (mean±SD). Differences in PFE of masks received from different sterilization departments were found. Conclusion Face masks can be reprocessed with 121 °C steam or H2O2 plasma sterilization with a minimal reduction in PFE. PFE comparison between filter material of sterilized masks and new, imported masks indicates that the filter material of most reprocessed masks of high quality brands can outperform new, imported face masks of unknown brands. Although the PFE of tested face masks from different sterilization departments remained efficient, using different types of sterilization equipment, can result in different PFE outcomes.

Simulation Analysis of Synchronization Control for Ultrahigh Pressure Sterilization Equipment Based on AMESim

This paper introduces the working principle of the ultrahigh pressure sterilization equipment, the hydraulic system of hydraulic cylinder promoting the plug moving is analyzed by simulation, and then the hydraulic system added synchronous motor is analyzed by simulation, which found that the latter hydraulic system has higher synchrony measure , and it can improve the working performance of the original equipment, and it has certain reference significance to the improvement of the hydraulic system of the equipment.

Readiness of health facilities to deliver safe male circumcision services in Tanzania: a descriptive study

Assessing the readiness of health facilities to deliver safe male circumcision services is more important in sub-Saharan Africa because of the inadequacy state of health facilities in many ways. The World Health Organization recommends that only facilities equipped with available trained staff, capable to perform at least minor surgery, able to offer minimum MC package and appropriate equipment for resuscitation, and compliant with requirements for sterilization and infection control should be allowed to deliver safe circumcision services. A cross-sectional study using quantitative data collection technique was conducted to assess the readiness of the health facilities to deliver safe circumcision services in selected districts of Tanzania. All hospitals, health centres and 30% of all dispensaries in these districts were selected to participate in the study. Face-toface questionnaires were administered to the heads of the health facilities and to health practitioners. Overall, 49/69 (59%) of the facilities visited provided circumcision services and only 46/203 (24%) of the health practitioners performed circumcision procedures. These were mainly assistant medical officers and clinical officers. The vast majority – 190/203 (95%) – of the health practitioners require additional training prior to providing circumcision services. Most facilities – 63/69 (91%) – had all basic supplies (gloves, basin, chlorine and waste disposal) necessary for infection prevention, 44/69 (65%) provided condoms, HIV counselling and testing, and sexuallytransmitted infections services, while 62/69 (90%) had the capability to perform at least minor surgery. However, only 25/69 (36%) and 15/69 (22%) of the facilities had functioning sterilization equipment and appropriate resuscitation equipment, respectively. There is readiness for roll out of circumcision services; however, more practitioners need to be trained on circumcision procedures, demand forecasting. Sterilization equipment for infection prevention and resuscitation equipment should also be made available.

Shock Sterilization of Dry Powder Foods

The sterilization for fungi and bacteria in some kinds of dry powder foods is limited to keep their grade. Especially in spices the heat sterilization is restricted to minimum use, because the heat reduces the hot-taste that is a principal component in spices. The operation for the sterilization has to act only on fungi and bacteria, not to degrade the volatile components contained in flavor elements. In this paper, the instance of shock sterilization is shown, and the development of the idea to the sterilization equipment and its performance are presented. Experimental results showed the potential of the shock for the sterilization and the feasibility for the industrial use.