Strip on elastic foundation described by different models, loaded by evenly distributed load

The problem of changing the size of the reactive pressures perceived by a strip at use of various models of the soil foundation and at various indicators of flexibility of the “strip-soil” system is investigated. The aim of the work is to obtain the form of plots of reactive pressures produced by the soil foundation on a strip loaded along its entire length with a uniformly distributed load. In determining the values ​​of reactive pressures and values ​​of bending moments, the data of a previously published work of one of the authors of the article, based on V.N. Zhemochkin method, is used. Analysis of the obtained calculation results showed that the shape of the plot of reactive pressures largely depends on both the index of flexibility of the foundation and the index of flexibility of the “strip-soil” system. The novelty of the research is that the calculation results are obtained using the traditional method of calculation (i.e., without taking into account the joint work of the “strip-soil” system and using 3 models of the soil base: linearly deformable half-plane, linearly deformable layer of finite thicknesses and the Winkler model. The obtained results of calculation will allow to design ground structures on the elastic foundation.

CHANGE IN STRENGTH PARAMETERS OF DISPERSED SOILS AFTER HIGH-FREQUENCY VIBRATION

The use of the technology of high-frequency sheet piles driving or extraction in conditions of weak, structurally unstable soils inevitably leads to a change in the structure of the soil. This is especially true for buildings which fall into the zone of influence. Often, foundation for historical buildings is water-saturated sands, spread by fluid and fluid-plastic clay soils. In the process of external dynamic action, the soil foundation is been destructing, so their strength and deformation parameters are reduced. In this case, the result of vibration effects on a dispersed water-saturated sample can be both compaction for sandy soil and decompaction of clay soils. These changes lead to additional deformations of buildings and structures of the surrounding area. Therefore, the issue of assessing the limits of applicability of vibration technology in certain conditions is relevant. The object of the study is the changes in the properties of clay soils of various consistencies after exposure to vibration. The results of laboratory studies to determine the strength parameters of dispersed soils after high-frequency vibration are presented. The results of field measurements by CPT "before", "after" vibration immersion and vibration extraction of sheet piles are considered. Comparison of the results of field and laboratory studies is carried out to identify patterns of change in the strength characteristics of weak soils under the influence of vibration loads. A tendency towards a decrease in the strength parameters of dispersed soils is shown. Currently, due to the insufficient number of laboratory and field studies to study the effect of high-frequency vibration on the change in the strength parameters of weak water-saturated clay soils, it is not possible to identify a clear dependence of the change in parameters on the time and frequency of vibration.