Damage Detection in Different Types of 3D Asymmetric Buildings Using Vibration Characteristics

This paper treats the vibration characteristics of three different types of asymmetric buildings and investigates the feasibility of applying an innovative vibration-based multicriteria approach-based damage index (MCA-DI) technique to detect the damage. This technique combines a modified form of the traditional modal strain energy method (MSEM) developed by decomposing the mode shapes into lateral and vertical components together with a modified form of the modal flexibility method to define a new damage indicator. Lastly, the dynamic behavior of three asymmetric building instances, including a 10-storey L-shaped structure, a 10-storey setback structure, and a 6-storey reinforced concrete structure with an unsymmetrical distribution of columns, was studied under five different damage scenarios. The results showed that despite different vibration characteristics of these three asymmetric buildings, the proposed method was able to accurately and effectively locate all damages and eliminate the confusion when more than one index is simultaneously used by using only the first a few modes.

Effect of lamination schemes on natural frequency and modal damping of fiber reinforced laminated beam using Ritz method

The current study focussed on analysing natural frequency and damping of laminated composite beams (LCBs) by varying fiber angle, aspect ratio, material property and boundary conditions. Ritz method with displacement field based on the shear and normal deformable theory is used and the modal damping is calculated using modal strain energy method. Effects of symmetric angle-ply and cross-ply, anti symmetric cross-ply, balanced and quasi-isotropic lay up schemes on modal damping are presented for the first time. Results revealed that influence of lay-up scheme on natural frequencies is significant for the thin beams while the modal damping of the thin beams are not sensitive to lay-up scheme. However, the lay-up scheme influences the damping significantly for the thick beams. Similarly, high strength fiber reinforced LCBs have higher natural frequency while low strength fiber reinforced LCBs have higher damping due to the better fiber-matrix interaction.

Damage Detection of Truss Structures by Reduction of Degrees of Freedom Using the Serep Method

Damage detection of bridge structures during their operating lifetime is essential. In this paper, two approaches, All Degrees of Freedom and Reduction of the Degrees of Freedom methods, are used to detect the damages in structures. The first method considers All Degrees of Freedom of the structure and the second method, Reduction of the Degrees of Freedom. Since the sensors are installed only on a few degrees of freedom, the responses are available for some of them. The Degrees of Freedom must be reduced and System Equivalent Reduction Expansion Process method is one of the most efficient ways to solve the problem. This research aimed to identify the damage of structures using the Modal Strain Energy method by reducing the structural degree of freedom. Two standard examples are used and the results compared to different damage cases to examine the efficiency of the mentioned method. The results illustrated the proper performance of the Reduction of the Degrees of Freedom method to identify the damage in truss structures. By increasing the number of modes, Reduction of the Degrees of Freedom method detects considerably more accurate the damaged elements, especially when the noise is considered. Also, based on the outcomes to identify damaged elements, it is possible to consider more modes instead of more sensors.