Methyl β-lactoside [methyl β-D-galactopyranosyl-(1→4)-β-D-glucopyranoside] monohydrate: a solvomorphism study

Methyl β-lactoside [methyl β-D-galactopyranosyl-(1→4)-β-D-glucopyranoside] monohydrate, C13H24O11·H2O, (I), was obtained via spontaneous transformation of methyl β-lactoside methanol solvate, (II), during air-drying. Cremer–Pople puckering parameters indicate that the β-D-Galp (β-D-galactopyranosyl) and β-D-Glcp (β-D-glucopyranosyl) rings in (I) adopt slightly distorted 4 C 1 chair conformations, with the former distorted towards a boat form (B C1,C4) and the latter towards a twist-boat form (O5 S C2). Puckering parameters for (I) and (II) indicate that the conformation of the βGalp ring is slightly more affected than the βGlcp ring by the solvomorphism. Conformations of the terminal O-glycosidic linkages in (I) and (II) are virtually identical, whereas those of the internal O-glycosidic linkage show torsion-angle changes of 6° in both C—O bonds. The exocyclic hydroxymethyl group in the βGalp residue adopts a gt conformation (C4′ anti to O6′) in both (I) and (II), whereas that in the βGlcp residue adopts a gg (gauche–gauche) conformation (H5 anti to O6) in (II) and a gt (gauche–trans) conformation (C4 anti to O6) in (I). The latter conformational change is critical to the solvomorphism in that it allows water to participate in three hydrogen bonds in (I) as opposed to only two hydrogen bonds in (II), potentially producing a more energetically stable structure for (I) than for (II). Visual inspection of the crystalline lattice of (II) reveals channels in which methanol solvent resides and through which solvent might exchange during solvomorphism. These channels are less apparent in the crystalline lattice of (I).

Isopropyl 3-deoxy-α-D-ribo-hexopyranoside (isopropyl 3-deoxy-α-D-glucopyranoside): evaluating trends in structural parameters

Isopropyl 3-deoxy-α-D-ribo-hexopyranoside (isopropyl 3-deoxy-α-D-glucopyranoside), C9H18O5, (I), crystallizes from a methanol–ethyl acetate solvent mixture at room temperature in a 4 C 1 chair conformation that is slightly distorted towards the C5 S C1 twist-boat form. A comparison of the structural parameters in (I), methyl α-D-glucopyranoside, (II), α-D-glucopyranosyl-(1→4)-D-glucitol (maltitol), (III), and 3-deoxy-α-D-ribo-hexopyranose (3-deoxy-α-D-glucopyranose), (IV), shows that most endocyclic and exocyclic bond lengths, valence bond angles and torsion angles in the aldohexopyranosyl rings are more affected by anomeric configuration, aglycone structure and/or the conformation of exocyclic substituents, such as hydroxymethyl groups, than by monodeoxygenation at C3. The structural effects observed in the crystal structures of (I)–(IV) were confirmed though density functional theory (DFT) calculations in computed structures (I)c–(IV)c. Exocyclic hydroxymethyl groups adopt the gauche–gauche (gg) conformation (H5 anti to O6) in (I) and (III), and the gauche–trans (gt) conformation (C4 anti to O6) in (II) and (IV). The O-glycoside linkage conformations in (I) and (III) resemble those observed in disaccharides containing β-(1→4) linkages.

Design of Boradecarboxylation Reaction

For mechanism of decarboxylation reaction, all textbooks show that the electron moves from the pi_C=O bond. However, the most donating bond orbital in the carbonyl group should be the lone pair(s) on the oxygen. Thus, a picture of orbital theory with delocalization from a lone pair should be more appropriate than that from the pi_C=O orbital. We confirmed our idea by theoretical calculation. In the TS, if we use 2-substituted b-ketoacids, the boat-form conformation should result in exclusively preferred generation of <i>E</i>-enolates. Normally, decarboxylation reaction performs in polar solvent, so that the resulting enols should be transformed to the corresponding ketones by tautomerization. Suppose we use the heteroatoms to obtain the enolate or enol ethers without tautomerization, it would offer a diastereoselective enol(ate) synthesis with regioselectivity, since the C=C double bond should always be introduced between two carbonyl groups. After screening the heteroatoms by the theoretical calculations, we found that boron is suitable for this purpose. We confirmed our idea by theoretical calculations, offering a new boradecarboxylation reaction to produce enolates diastereoselecitively and regioselectively.

Design of Boradecarboxylation Reaction

For mechanism of decarboxylation reaction, all textbooks show that the electron moves from the pi_C=O bond. However, the most donating bond orbital in the carbonyl group should be the lone pair(s) on the oxygen. Thus, a picture of orbital theory with delocalization from a lone pair should be more appropriate than that from the pi_C=O orbital. We confirmed our idea by theoretical calculation. In the TS, if we use 2-substituted b-ketoacids, the boat-form conformation should result in exclusively preferred generation of <i>E</i>-enolates. Normally, decarboxylation reaction performs in polar solvent, so that the resulting enols should be transformed to the corresponding ketones by tautomerization. Suppose we use the heteroatoms to obtain the enolate or enol ethers without tautomerization, it would offer a diastereoselective enol(ate) synthesis with regioselectivity, since the C=C double bond should always be introduced between two carbonyl groups. After screening the heteroatoms by the theoretical calculations, we found that boron is suitable for this purpose. We confirmed our idea by theoretical calculations, offering a new boradecarboxylation reaction to produce enolates diastereoselecitively and regioselectively.

A concise and efficient concurrent synthesis of 6,11-dihydrodibenzo[b,e]azepines and 5,6,11,12-tetrahydrodibenzo[b,f]azocines and their conversion to 4-oxo-8,13-dihydro-4H-benzo[5,6]azepino[3,2,1-ij]quinoline-5-carboxylates and N-acetyl-5,6,11,12-tetrahydrodibenzo[b,f]azocines: synthetic sequence, spectroscopic characterization and the structures of two products

Reaction of 2-allyl-N-benzyl-4-fluoroaniline or 2-allyl-N-benzyl-4-chloroaniline with 98% sulfuric acid leads to the concurrent formation of halogeno-substituted 11-ethyl-6,11-dihydrodibenzo[b,e]azepines, (II), and halogeno-substituted 11-methyl-5,6,11,12-tetrahydrodibenzo[b,f]azocines, (III), in each case in (II):(III) molar ratios of ca 2:1. Further reaction of (II) leads to ethyl 13-ethyl-2-halogeno-4-oxo-8,13-dihydro-4H-benzo[5,6]azepino[3,2,1-ij]quinoline-5-carboxylate, while acetylation of (III) gives the corresponding N-acetyl derivatives. The dibenzo[b,e]azepine and dibenzo[b,f]azocine ring systems are of importance in forming the core of a variety of bioactive compounds. In ethyl 13-ethyl-2-fluoro-4-oxo-8,13-dihydro-4H-benzo[5,6]azepino[3,2,1-ij]quinoline-5-carboxylate, C22H20FNO3, (IVa), the azepine ring adopts a conformation close to the twist-boat form, and the molecules are linked into a three-dimensional framework structure by a combination of C—H...O and C—H...π(arene) hydrogen bonds. The azocine ring in 5-acetyl-2-chloro-11-methyl-5,6,11,12-tetrahydrobenzo[b,f]azocine, C18H18ClNO, (Vb), adopts the boat–boat conformation and the molecules are again linked by C—H...O and C—H...π(arene) hydrogen bonds, but this time form a sheet structure.

Boat Representation in Nusantara Architecture

Architecture is one of the arts of cultural product, archipelago culture rooted in traditional culture, vice versa. Traditional architecture is very diverse in Indonesia, along with the diversity of its ethnic. Traditional architecture is building with form and function which has its own characteristic, inherited from generation to generation that can be used to hold activity by the people around it. Therefore, traditional architecture is the cultural expression and direct reflection in presenting something by its people. Some Nusantara Architectures adopt boat as the representation for building’s form. Therefore, the author is interested to prove the correlation of boat as representation in some archipelago architectures. This research uses data search method through literature studies by collecting data on some researched archipelago architecture buildings' form and construction system. From these data, a correlation between boat form representation and construction system used in boats and buildings can be concluded. Keyword: Nusantara Architecture, Form of Architecture, Boat Construction, Boat Representation.

A Convenient Synthesis of Fused Tetrahydroazocines from Acenaphthylene-1,2-dione, Proline, and Acetylenic Esters

A synthesis of dialkyl (12E,14E)-7-oxo-10,11-dihydro-7H,9H-azocino[2,1-a]benzo[de]isoquinoline-13,14-dicarboxylates through a 1,3-dipolar cycloaddition reaction of azomethine ylides, generated in situ from proline and acenaphthylene-1,2-dione, with dialkyl acetylenedicarboxylates is described. According to the X-ray diffraction data, the tetrahydroazocine ring has a rigid twist-boat form with approximate local C2 symmetry.

Crystal structures of three bicyclic carbohydrate derivatives

The title compounds, [(1R,3R,4R,5R,6S)-4,5-bis(acetyloxy)-7-oxo-2-oxabicyclo[4.2.0]octan-3-yl]methyl acetate, C14H18O8, (I), [(1S,4R,5S,6R)-5-acetyloxy-7-hydroxyimino-2-oxobicyclo[4.2.0]octan-4-yl acetate, C11H15NO6, (II), and [(3aR,5R,6R,7R,7aS)-6,7-bis(acetyloxy)-2-oxooctahydropyrano[3,2-b]pyrrol-5-yl]methyl acetate, C14H19NO8, (III), are stable bicyclic carbohydrate derivatives. They can easily be synthesized in a few steps from commercially available glycals. As a result of the ring strain from the four-membered rings in (I) and (II), the conformations of the carbohydrates deviate strongly from the ideal chair form. Compound (II) occurs in the boat form. In the five-membered lactam (III), on the other hand, the carbohydrate adopts an almost ideal chair conformation. As a result of the distortion of the sugar rings, the configurations of the three bicyclic carbohydrate derivatives could not be determined from their NMR coupling constants. From our three crystal structure determinations, we were able to establish for the first time the absolute configurations of all new stereocenters of the carbohydrate rings.

Six polycyclic pyrimidoazepine derivatives: syntheses, molecular structures and supramolecular assembly

A versatile synthetic method has been developed for the formation of variously substituted polycyclic pyrimidoazepine derivatives, formed by nucleophilic substitution reactions on the corresponding chloro-substituted compounds; the reactions can be promoted either by conventional heating in basic solutions or by microwave heating in solvent-free systems. Thus, (6RS)-6,11-dimethyl-3,5,6,11-tetrahydro-4H-benzo[b]pyrimido[5,4-f]azepin-4-one, C14H15N3O, (I), was isolated from a solution containing (6RS)-4-chloro-8-hydroxy-6,11-dimethyl-6,11-dihydro-5H-benzo[b]pyrimido[5,4-f]azepine and benzene-1,2-diamine; (6RS)-4-butoxy-6,11-dimethyl-6,11-dihydro-5H-benzo[b]pyrimido[5,4-f]azepin-8-ol, C18H23N3O2, (II), was formed by reaction of the corresponding 6-chloro compound with butanol, and (RS)-4-dimethylamino-6,11-dimethyl-6,11-dihydro-5H-benzo[b]pyrimido[5,4-f]azepin-8-ol, C16H20N4O, (III), was formed by reaction of the chloro analogue with alkaline dimethylformamide. (6RS)-N-Benzyl-8-methoxy-6,11-dimethyl-6,11-dihydro-5H-benzo[b]pyrimido[5,4-f]azepin-4-amine, C22H24N4O, (IV), (6RS)-N-benzyl-6-methyl-1,2,6,7-tetrahydropyrimido[5′,4′:6,7]azepino[3,2,1-hi]indol-8-amine, C22H22N4, (V), and (7RS)-N-benzyl-7-methyl-2,3,7,8-tetrahydro-1H-pyrimido[5′,4′:6,7]azepino[3,2,1-ij]quinolin-9-amine, C23H24N4, (VI), were all formed by reaction of the corresponding chloro compounds with benzylamine under microwave irradiation. In each of compounds (I)–(IV) and (VI), the azepine ring adopts a conformation close to the boat form, with the C-methyl group in a quasi-equatorial site, whereas the corresponding ring in (V) adopts a conformation intermediate between the twist-boat and twist-chair forms, with the C-methyl group in a quasi-axial site. No two of the structures of (I)–(VI) exhibit the same range of intermolecular hydrogen bonds: different types of sheet are formed in each of (I), (II), (V) and (VI), and different types of chain in each of (III) and (IV).

(8RS)-4-Amino-6-(4-chlorophenyl)-8-(2,4-dichlorothiazol-5-yl)-8,9-dihydro-7H-pyrimido[4,5-b][1,4]diazepineN,N-dimethylformamide monosolvate: sheets built from N—H...N and C—H...O hydrogen bonds

In the title compound, C16H11Cl3N6S·C3H7NO, the seven-membered ring adopts a conformation which is close to the twist-boat form. The molecular components are linked into sheets by a combination of two N—H...N hydrogen bonds and two C—H...O hydrogen bonds. Comparisons are made with other aminopyrimidine derivatives.