Dissolving pulp production: Cellulases and xylanases for the enhancement of cellulose accessibility and reactivity

Dissolving pulps are high-grade cellulose pulps that have minimum amount of non-cellulosic impurities. Dissolving pulps are the basic source for the manufacturing of several cellulosic products such as viscose, lyocell, cellulose acetates, cellulose nitrates, carboxymethyl-cellulose, etc. Dissolving pulps are mainly manufactured by pre-hydrolysis kraft and acid sulphite pulping. A high reactivity of dissolving pulps is desirable for its eco-friendly utilization for several purposes. Several approaches including mechanical, chemical, ultrasonic, and enzymatic treatments have been employed for the improvement of pulp reactivity. This review mainly focussed on pulp reactivity improvement through enzymatic approaches. Cellulases and xylanase have been proved effective for the improvement of pulp reactivity of dissolving pulp from different sources. The different combinations of cellulase, xylanase, and mechanical refining have been tested and found more effective rather than the single one.

NADES-based fractionation of biomass to produce raw material for the preparation of cellulose acetates

Waste biomass (agave bagasse) and native birch wood were used as raw materials for a novel fractionation and derivation process to produce cellulose acetates (CAs). During the first stage of the fractionation process, a significant amount of hemicelluloses and lignin were dissolved from the biomass using a natural deep eutectic solvent (NADES) that consisted of a mixture of choline chloride and lactic acid with the molar ratio of 1:9. Then, the residual solid material was delignified by bleaching it with a mixture of acetic acid and sodium chlorite. The fractionation process generated differently purified pulps (celluloses) which were converted to CAs. The crystallinity index, polymerization degree, chemical composition, and thermal properties of the differently purified pulps and CAs were analyzed to evaluate the efficacy of the acetylation process and to characterize the CAs. The chemical derivation of the differently purified cellulose samples generated CAs with different degrees of substitution (DSs). The more purified the cellulose sample was, the higher its DS was. Moreover, some differences were observed between the acetylation efficiencies of birch and agave bagasse. Typically, cellulose purified from birch by treating it with NADES followed by bleaching was acetylated more completely (DS = 2.94) than that derived from agave bagasse (DS = 2.45). These results revealed that using green solvents, such as NADES, to treat both agave bagasse (waste biomass) and birch wood, allowed pure fractions to be obtained from biomass, and thus, biomass could be valorized into products such as CAs, which present a wide range of applications.

Activating cellulose via its reversible reaction with CO2 in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene for the efficient synthesis of cellulose acetate

Reversible reaction of cellulose with CO2 in DMSO/DBU results in a derivative dissolution of cellulose, which can be applied for the efficient acetylation of cellulose to afford cellulose acetates with degrees of substitution from 1.78–2.89.