Time-jerk optimal trajectory planning of hydraulic robotic excavator

Due to the fact that intelligent algorithms such as Particle Swarm Optimization (PSO) and Differential Evolution (DE) are susceptible to local optima and the efficiency of solving an optimal solution is low when solving the optimal trajectory, this paper uses the Sequential Quadratic Programming (SQP) algorithm for the optimal trajectory planning of a hydraulic robotic excavator. To achieve high efficiency and stationarity during the operation of the hydraulic robotic excavator, the trade-off between the time and jerk is considered. Cubic splines were used to interpolate in joint space, and the optimal time-jerk trajectory was obtained using the SQP with joint angular velocity, angular acceleration, and jerk as constraints. The optimal angle curves of each joint were obtained, and the optimal time-jerk trajectory planning of the excavator was realized. Experimental results show that the SQP method under the same weight is more efficient in solving the optimal solution and the optimal excavating trajectory is smoother, and each joint can reach the target point with smaller angular velocity, and acceleration change, which avoids the impact of each joint during operation and conserves working time. Finally, the excavator autonomous operation becomes more stable and efficient.

Parameter Identification and Control Algorithm of Electrohydraulic Servo System for Robotic Excavator Based on Improved Hammerstein Model

In view of the nonlinearity and time-varying characteristics of the electrohydraulic servo system of the robotic excavator, a nonlinear adaptive identification and control algorithm based on improved Hammerstein model is proposed. The Hammerstein algorithm model can approximate the nonlinear system with enough precision, but for the time-varying systems is not satisfactory. In order to compensate for the influence of time-varying factors, the fuzzy control module is designed to adaptively update the forgetting factor. The experimental results show that the improved Hammerstein model error is about 40.11% less than the classical Hammerstein model error. This proves that the improved Hammerstein model is feasible and effective to describe the electrohydraulic servo system of the robotic excavator.