The Assessment of the Possibility of Smelting a Cast Alloy for the Manufacture of Components and Parts of Arctic Technical Equipment Using Ore from the "Verkhnyaya Amga" Ore Occurrence

The research assesses the possibilities of using local minerals to create foundry alloys that are used in conditions of low temperature. The mineral-geochemical composition of iron ore from Verkhnyaya Amga ore occurrences in the Aldan region of the Sakha Republic (Yakutia) was studied in detail. The expedience of using iron ores from this ore occurrence to develop new cold-resistant and high-strength steels was analyzed. The chemical composition and microstructure of the cast alloys were studied. The ore contains oxides of alkaline earth metals: MgO; CaO; Sr0 and BaO, the total content of which is 4.2%, that contributes to the process of deoxidation of the melt during its cooling, and the deoxidation product in the form of oxides and other chemical compounds based on Ca, Sr and Ba floats into slag. During crystallization, the melt is cleaned of detrimental impurities, non-metallic inclusions, gases, pores, etc. Alloy is smelted from enriched ore, samples for static tension and toughness are made in order to study the physicomechanical properties. Microstructure of the obtained alloy and structural steel subjected to static tension at an external load of 0.8 yield strength (σ = 0,8 σт) was investigated. Mechanical properties and dynamic characteristics were measured. Analogues for comparing the strength and plastic properties were given.

Argon Blowing Technology Using in the LF Refining

The process of LF Refining is introduced in this paper. Because the LF ladle furnace has the advantages are widely used and developed in many companies. The argon is blown into the ladle, so the purpose of refining is achieved. The argon stirring can accelerate the chemical reaction between slag and steel. In the circulation process, large inclusion and deoxidation product in the lower region transfer into the slag. The material transfer between steel and slag can be accelerated. At the same time, argon stirring can make molten steel composition and temperature uniformity. Thus, the ladle of blowing argon can be roughly divided into three important flow region has been introduced. Two-phase region, the top horizontal flow zone and recirculation zone exists in the ladle.

Deoxidation and Inclusion Control in Stainless Steel Refining

This paper analyzed the deoxidation principle of new-type compound deoxidizer, Si-Al-Fe alloy during stainless steel refining, summarized related studies on deoxidizer behavior, deoxidation products, alloying treatment by workers in the metallurgical in recent years, analyzed to solve a series of problems caused by deoxidation product with high melting point, and pointed out that it was a trend for large-scale production of "zero" inclusions steel or rendering inclusions harmless and functional.