Inverted ternary OPD based on PEIE

This paper proposes an inverted ternary organic photodetector (OPD), whose structure is ITO/PEIE/PC61BM/P3HT:PCPDTBT/MoO3 /Al. The use of PEIE as the cathode buffer layer avoids the influence of acidic PEDOT:PSS on the surface and life of the conventional device . The preparation of the ternary active layer ensures the photoelectric characteristics of the device in the visible-infrared broad spectrum range. In this experiment, the effect of PEIE thickness on the working mode of the device was studied by changing the concentration of the spin-coated PEIE solution. Finally, when the solution of PEIE is less than 0.45wt%, the device works in the diode mode, on the contrary, it works in the photoconductive mode. And under 550nm illumination (optical power 4.02mW/cm2) , the device achieves a responsivity of 1.64A/W and an external quantum efficiency of 370%.

Highly stable and efficient cathode-buffer-layer-free inverted perovskite solar cells

We proposed a novel simplified device structure for efficient and stable inverted perovskite solar cells that has no cathode buffer layer by modifying the electron transport layer with insulating polymers as an additive.

Polyethylenimine-Ethoxylated Interfacial Layer for Efficient Electron Collection in SnO2-Based Inverted Organic Solar Cells

In this work, we studied inverted organic solar cells based on bulk heterojunction using poly(3-hexylthiophene-2,5-diyl):[6,6]-phenyl-C71-butyric acid methyl ester (P3HT:PCBM) as an active layer and a novel cathode buffer bilayer consisting of tin dioxide (SnO2) combined with polyethylenimine-ethoxylated (PEIE) to overcome the limitations of the single cathode buffer layer. The combination of SnO2 with PEIE is a promising approach that improves the charge carrier collection and reduces the recombination. The efficient device, which is prepared with a cathode buffer bilayer of 20 nm SnO2 combined with 10 nm PEIE, achieved Jsc = 7.86 mA/cm2, Voc = 574 mV and PCE = 2.84%. The obtained results exceed the performances of reference solar cell using only a single cathode layer of either SnO2 or PEIE.