RESEARCH OF THERMAL AND THERMOMECHANICAL PROPERTIES OF COPOLYMERS BASED ON PYROMELLITE DIANHYDRIDE, 4,4'-DIAMINODIPHENYLOXIDE AND [2-(AMINOMETHYL)BICYCLO[2.2.1]HEPT-3-YL]ANILINES

The thermal and thermomechanical properties of copolyimides based on pyromellitic dianhydride, 4,4'-diaminodiphenyloxide and [2-(aminomethyl)bicyclo [2.2.1]hept-3-yl]anilines in an inert medium have been studied for the first time. It is shown that the introduction into the structure of aromatic polyimides up to 20 mol %. asymmetric vicinally substituted bicyclic diamines allows to obtain materials with increased hydrolytic stability in comparison with fully aromatic polyimides while maintaining a high level of thermomechanical characteristics.

Polyimide-Based Membrane Materials for CO2 Separation: A Comparison of Segmented and Aromatic (Co)polyimides

A series of new poly(ethylene oxide) (PEO)-based copolyimides varying in hard segment structure are reported in this work as CO2 selective separation membranes. Their structural diversity was achieved by using different aromatic dianhydrides (4,4′-oxydiphthalic anhydride (ODPA), 4,4’-(hexafluoroisopropylidene)diphthalic anhydride (6FDA)) and diamines (4,4′-oxydianiline (ODA), 4,4′-(4,4′-isopropylidene-diphenyl-1,1′- diyldioxy)dianiline (IPrDA), 2,3,5,6-tetramethyl-1,4-phenylenediamine (4MPD)), while keeping the content of PEO (2000 g/mol) constant (around 50%). To get a better insight into the effects of hard segment structure on gas transport properties, a series of aromatic polyimides with the same chemistry was also studied. Both series of polymers were characterized by 1HNMR, FTIR, WAXD, DSC, TGA, and AFM. Permeabilities for pure He, O2, N2, and CO2 were determined at 6 bar and at 30 °C, and for CO2 for pressures ranging from 1 to 10 bar. The results show that OPDA-ODA-PEO is the most permeable copolyimide, with CO2 permeability of 52 Barrer and CO2/N2 selectivity of 63, in contrast to its fully aromatic analogue, which was the least permeable among polyimides. 6FDA-4MPD-PEO ranks second, with a two times lower CO2 permeability and slightly lower selectivity, although 6FDA-4MPD was over 900 times more permeable than OPDA-ODA. As an explanation, partial filling of hard domain free voids by PEO segments and imperfect phase separation were proposed.

Diels-Alder cycloaddition polymerization of highly aromatic polyimides and their multiblock copolymers

The ability to prepare block, multiblock and segmented polymers is an essential and established tool in polymer chemistry to tailor the properties of materials and steer the formation of complex...

The Thermal Stability and Mechanical Properties of Non-Segregating Blends of Polyimides with Copoly(Urethane-Imide)s

The series of compositions containing thermodynamically incompatible flexible blocks of aliphatic polyesters and rigid blocks of aromatic bis (urethane) imides in the volume of polymers was obtained on the basis of multiblock (segmented) poly (urethane-imides) and related aromatic polyimides. The series includes segmented poly (urethane-imides) with different relative content of flexible and rigid blocks, non-segregating mixtures of poly (urethane-imides) and thermoplastic partially crystalline polyimide, statistical copolymers of poly (urethane-imide) with imide, and non-segregating mixtures of statistical copolymers with thermoplastic polyimide. The derived polymer systems were studied using thermogravimetric analysis, differential scanning calorimetry, and dynamic mechanical analysis. The deformation and strength properties of film samples are determined. It is shown that the properties of the studied polymers change as their content of imides blocks increases, and the transition from thermoplastic poly (urethane-imide) elastomers to thermoplastic polyimides is observed.