Shape memory polymer foam: active deformation, simulation and validation of space environment

Shape memory polymer foam (SMPF) is being studied extensively as potential aerospace materials as they have high compression ratio, high specific strength and high specific modulus compared to other shape memory polymers. In this paper, a composite foam with shape memory epoxy (SMEP) as matrix and polyurethane (PU) as functional phase was prepared. The SMPF has been characterized by different analytical and testing methods, and its chemical crosslinking reaction and material properties have been studied. The SMPF was installed in the shape memory polymer composite (SMPC) flexible solar array system (SMPC-FSAS), and ground environment tests and orbital validation were performed. Considering the particularity of space environment, the thermal performance test of ground space environment can effectively test the reliability of shape memory performance. Finally, the SMPC-FSAS carried on SJ-20 satellite successfully deployed on geosynchronous orbit for the first time in the world. Moving forward, SMPF assesses the feasibility of applications in the space field and provides more valuable information.

Effect of multi-layer prosthetic foam liner on the stresses at the stump–prosthetic interface

The prosthetic liner plays a significant role in the redistribution of the pressure between the stump and the socket, as it adding a cushioning layer between the stump and the socket which relieves pain and makes the prosthesis more comfortable. This study employed nonlinear finite element analyses to investigate the peak pressure and shear stress at stump–prosthetic interface in the case of multi-layer prosthetic foam liner, this liner having an inner polymeric foam layer Surrounded by another type of polymeric foam layer, we used three different types of foams in different order to define this liner (flexible polyurethane foam, polyurethane-shape memory polymer foam, and natural rubber latex foam). That’s allows comparing 6 deferent configuration of multi-layer prosthetic foam liner.

Shape Memory Polymer Foam with Programmable Apertures

In this work, a novel type of polyester urethane urea (PEUU) foam is introduced. The foam was produced by reactive foaming using a mixture of poly(1,10–decamethylene adipate) diol and poly(1,4–butylene adipate) diol, 4,4′-diphenylmethane diisocyanate, 1,4–butanediol, diethanolamine and water as blowing agent. As determined by differential scanning calorimetry, the melting of the ester-based phases occurred at temperatures in between 25 °C and 61 °C, while the crystallization transition spread from 48 °C to 20 °C. The mechanical properties of the foam were simulated with the hyperplastic models Neo-Hookean and Ogden, whereby the latter showed a better agreement with the experimental data as evidenced by a Pearson correlation coefficient R² above 0.99. Once thermomechanically treated, the foam exhibited a maximum actuation of 13.7% in heating-cooling cycles under a constant external load. In turn, thermal cycling under load-free conditions resulted in an actuation of more than 10%. Good thermal insulation properties were demonstrated by thermal conductivities of 0.039 W·(m·K)−1 in the pristine state and 0.052 W·(m·K)−1 in a state after compression by 50%, respectively. Finally, three demonstrators were developed, which closed an aperture or opened it again simply by changing the temperature. The self-sufficient material behavior is particularly promising in the construction industry, where programmable air slots offer the prospect of a dynamic insulation system for an adaptive building envelope.