DESTRUCTION OF RESINOUS COMPOUND FROM WASTE BY USE OF NATURAL ENZYMES

In present scenario huge quantity of waste are produced every day. It contains plastics, waste papers, plastic containers, some of these are degradable, and some of these are non-degradable waste.Non-biodegradable things are present in waste treated with mechanical pulverizing mechanisms and with few of strong chemical. Chemicals such as concentrated Hydrochloric, Sulphuric acids, sulphamic acids and many other hazardous chemicals are used for destroying wastes in simple form or in disperse form. Almost 70% of the waste is being dumped in the soil layer. After certain interval of time compounds present in soils such as salts of the metals and temperature of soil help in decomposing the waste periodically. Due to this process large quantity of soil gets contaminated. In this project we have tried to replace hazardous chemicals with other non-hazardous chemicals and some natural enzymes, which may give same reactions as with toxic chemicals. Objectives may also helps in use of eco friendly chemicals for reducing soil pollution and water pollutions. Hence it will minimize the other impacts on environment such as air pollution, noise pollutions, water pollutions and soil pollutions. All process will carry out under Green Chemistry cycles.

The Research on the Disperse Form of PEO Fiber by Electrostatic Spinning Method

We prepared PEO nano fiber with different concentration of PEO acid solution by electrostatic spinning in different technology conditions. Then we studied the property of solution by rotary viscometer instrument and electrical conductivity spectrometer, the disperse form of the fiber by SEM scattered forms, the thermal property of the composite was studied by thermogravimetry and derivative thermogravimetry (TG-DTA). The conclusion is the disperse form of fiber is controlled by the concentration of solution, the voltage of spinning, the distance of solidification. The important factor is about the solution. To increase the solution viscosity and the solidification distance, reduce the spinning voltage would decrease the diameter of the fiber. Thermal stability of fiber was significantly better than powder.