Development of a Wireless Corrosion Detection System for Steel-Framed Structures Using Pulsed Eddy Currents

Structural health monitoring (SHM) can be more efficient with the application of a wireless sensor network (WSN). However, the hardware that makes up this system should have sufficient performance to sample the data collected from the sensor in real-time situations. High-performance hardware can be used for this purpose, but is not suitable in this application because of its relatively high power consumption, high cost, large size, and so on. In this paper, an optimal remote monitoring system platform for SHM is proposed based on pulsed eddy current (PEC) that is utilized for measuring the corrosion of a steel-framed construction. A circuit to delay the PEC response based on the resistance–inductance–capacitance (RLC) combination was designed for data sampling to utilize the conventional hardware of WSN for SHM, and this approach was verified by simulations and experiments. Especially, the importance of configuring sensing modules and the WSN for remote monitoring were studied, and the PEC responses caused by the corrosion of a specimen made with steel were able to be sampled remotely using the proposed system. Therefore, we present a remote SHM system platform for diagnosing the corrosion condition of a building with a steel structure, and proving its viability with experiments.

Damage detection of cracks in carbon fibre reinforced composites by pulsed eddy-current testing

Non-destructive evaluation techniques that are based on electromagnetic methods are commonly used for inspection of metallic and carbon fibre reinforced plastics parts. Some of these inspection methods are based on eddycurrents which are generated by the electromagnetic induction phenomenon occurring under variable magnetic induction field. In eddy-currents testing, the depth of penetration into the material is controlled by the conductivity of the tested material and also the work frequency. Transient eddy-currents, also called pulsed eddy-currents, is an emerging non destructive technique that employs a pulsed excitation to induce a transient electromagnetic response from defects lying deep within a conducting structure. Such defects are difficult to inspect by conventional techniques, such as harmonic eddy-currents or ultrasonics. A large number of recent scientific publications have dealt with the theoretical understanding of the pulsed eddy-currents phenomenon and have also undertaken the design feature of appropriate probes. Finite element solution of the governing equations has been used to simulate the output signals as function of the input electrical excitation signal. Considering a B-scan strategy, simulation of a pulsed eddy-currents based probe is performed in this work with the objective to assess detectability of small defects through monitoring impedance changes of a detection probe.