Determination of levamisole using ion-selective electrode

Current development of applied ionometry requires focusing of theoretical studies both on revealing the nature of the selectivity of electrode membranes and on the developing the new methods of membrane synthesis and their modification with the goal of obtaining more perfect structural units with improved functional properties. Elucidation of the relationship between the structural characteristics of the membranes and their effect on the electro-analytical properties is a rather important task. The interaction of organic cation levamisole with bromophenol blue was studied to meet the goals. Levamisole-selective sensor with a plasticized polyvinyl chloride (PVC) membrane has been developed. The electrode contains an ionic associate of levamisole with bromophenol blue. PVC was used as a matrix to model the membrane composition. Membranes plasticized with dibutyl phthalate (DBP), diethyl phthalate (DEP), dioctyl phthalate (DOP), dinonyl phthalate (DNP), dibutyl sebacate (DBP), tricresyl phosphate (TCP) were studied. It was shown that the nature of the plasticizer insignificantly affected the analytical characteristics of the electrode. The response is linear within the concentration range of 1 × 10–5 – 1 ×10–1 mole/liter with the slope of the electrode function 52.1 ± 1.0 mV/pC. The sensor has a quick response (10 sec) and can be used for at least 8 weeks without any divergence in the long run. The operation life of the membranes with a high plasticizer content is much longer. The electrode can be used within pH range of 3.0 – 8.0. Potentiometric selectivity coefficients of the electrode relative to a number of potentially interfering ions were determined. The developed electrode was tested in determination of levamisole in model solutions and pharmaceuticals («Decaris» and «Levamisole-Zdorovye»).

A Sensitive Electrochemical Sensor for Rapid Determination of Mebeverine Hydrochloride and Metronidazole Benzoate Selective Molecular Imprinted Polymer in the PVC Membrane

By using precipitation polymerization, liquid electrodes of polymers imprinted with Mebeverine hydrochloride and metronidazole benzoate were created whereas the imprinted polymer (MIP) and non imprinted (NIP) polymers were prepared by using Mebeverine hydrochloride and Metronidazole benzoate qua a template. In the polymerization process, 2-Acrylamido-2-methyl-1-propane Sulphonic acid (AMPS) or 1-Vinylimidazole (VIZ) was used qua monomer, pentaerythritol triacrylate (PETRA) or Divinylbanzene (DVB) was used qua a cross-linker while benzoyl peroxide (BPO) was used as an initiator. The MIP membranes and the membranes of NIP were created by using Dibutyl Sebacate (DBS) and Tris(2-ethylhexyl)phosphate(TEHP) qua plasticizers in PVC matrix. The response time of the liquid electrodes was 1min. whereas their slopes and detection limits reached to 19.62 – 57.36 mV per decade and 1.2 x 10-6 – 2.0 x 10-5 M, respectively. Filling with standard solution of drug (0.1M), the liquid electrodes response -with suitable No.( selectivity for numerous of species - was suitable No.( since pH reached to 1.5 – 12. The developed electrodes were successfully applied for the analyte determination in preparation pharmaceutical sample without any time consuming pretreatment steps.

Stability Study and Kinetic Monitoring of Cefquinome Sulfate Using Cyclodextrin-Based Ion-Selective Electrode: Application to Biological Samples

Two novel cefquinome sulfate (CFQ)-selective electrodes were performed with dibutyl sebacate as a plasticizer using a polymeric matrix of polyvinyl chloride. Sensor 1 was prepared using sodium tetraphenylborate as a cation exchanger without incorporation of ionophore, whereas 2-hydroxy propyl β-cyclodextrin was used as ionophore in sensor 2. A stable, reliable, and linear response was obtained in concentration ranges 3.2 × 10−5 to 1 × 10−2 mol/L and 1 × 10−5 to 1 × 10−2 mol/L for sensors 1 and 2, respectively. Both sensors could be sufficiently applied for quantitative determination of CFQ in the presence of degradation products either in bulk powder or in pharmaceutical formulations. Sensor 2 provided better selectivity and sensitivity, wider linearity range, and higher performance. Therefore it was used successfully for accurate determination of CFQ in biological fluids such as spiked plasma and milk samples. Furthermore, an online kinetic study was applied to the CFQ alkaline degradation process to estimate the reaction rate and half-life with feasible real-time monitoring. The developed sensors were found to be fast, accurate, sensitive, and precise compared with the manufacturer's reversed-phase chromatographic method.

Study of Cellulose-Dibutyl Sebacate Copolymer Synthesis and Characterization of Crosslinked Cellulose-Dibutyl Sebacate Copolymers for Oil Absorbency

A novel cellulose-based oil absorbent crosslinked cellulose-dibutyl sebacate copolymers was prepared by the graft crosslinking polymerization of in situ synthesized dibutyl sebacate and cotton cellulose using potassium persulfate as an initiator. The copolymers were characterized by infrared spectroscopy, X-ray diffraction, scanning electron microscopy, thermogravimetry, differential scanning calorimetry, etc. The effects of reaction conditions, such as, ratio of reaction regents, reaction temperature, reaction time, etc, on the efficiency of oil absorbency were examined. The optimized reaction conditions for the synthesis of crosslinked cellulose-dibutyl sebacate copolymers were: m(cotton pulp):m(K2S2O8 initiator):m(dibutyl sebacate) = 1 0.025 2.0(W/W)，75°C，and 5-6 h. The resulting crosslinked cellulose-dibutyl sebacate copolymers were floppy and exhibited excellent oil absorbency efficiency.