On Modelling Approaches to the Influence of Mechanical Deformation on the Micromagnetic Activity in a Mild Steel

In this study an attempt is made to develop a theoretical modelling by which the influence of certain mechanical deformation factors on the micromagnetic emission behavior of a low-carbon steel can reasonably be described and estimated. This modelling consists of a simple kinetics – kinematics – aided approach of the pinning state – controlled domain wall motion by which appropriate specific parameters are introduced. In this aspect the basic notion of specific micromagnetic activity (s.m.a.) is introduced by which the energetic strength of the activity is reflected. In this way, the synergetic effect of the quantitative (count rate) and qualitative (voltage) the detected micromagnetic Barkhausen emission (MBE) is taken into consideration. Thus it is possible, theoretically, to give a prediction of the general trend of changes in the s.m.a. under the influence of the tensile elastic as well as plastic deformation. For instance, one can demonstrate that tensile elastic deformation cannot influence the s.m.a. whereas plastic one leads to an increase in this. Furthermore, one can also predict that increasing permanent (residual) plastic deformation, obtained after unloading from prior tensile loading, leads to an obvious decrease in the s.m.a. Similar decrease in the s.m.a. can also be predicted for increasing rolling deformation by means of the same modelling approach used for the permanent tensile plastic deformation. Owing to the good agreement with the experimental results and the simplicity of the proposed theoretical approaches that can be seen as a promising valuable tool for further similar studies.

Current-Driven Domain Wall Motion in Curved Ferrimagnetic Strips Above and Below the Angular Momentum Compensation

Current driven domain wall motion in curved Heavy Metal/Ferrimagnetic/Oxide multilayer strips is investigated using systematic micromagnetic simulations which account for spin-orbit coupling phenomena. Domain wall velocity and characteristic relaxation times are studied as functions of the geometry, curvature and width of the strip, at and out of the angular momentum compensation. Results show that domain walls can propagate faster and without a significant distortion in such strips in contrast to their ferromagnetic counterparts. Using an artificial system based on a straight strip with an equivalent current density distribution, we can discern its influence on the wall terminal velocity, as part of a more general geometrical influence due to the curved shape. Curved and narrow ferrimagnetic strips are promising candidates for designing high speed and fast response spintronic circuitry based on current-driven domain wall motion.

Numerical simulation of domain wall motion in a surface discharge over a ferroelectric

The article presents a simplified numerical simulation of a vacuum ferroelectric cathode operating in a low-current mode (without surface plasma formation). The field emission from the cathode was simulated for the range of applied electric field magnitudes. The polarization domain growth process during the charging of ferroelectric surface was simulated using Landau-Ginzburg-Devonshire model. Interaction of the electrons with a depolarization field of a domain wall led to an attraction of the electrons to the polarization domain boundaries. A close to the linear dependence of the equilibrium domain wall position from the applied electric field was found with the total emitted charge proportional to the domain size.

The emergence of high room temperature in-plane and out-of-plane magnetostriction in polycrystalline CoFe2O4 film

The polycrystalline CoFe2O4 (CFO) film on cantilever substrate of silicon was grown using pulsed laser deposition (PLD) method and investigated its in-plane and out-of-plane magnetostrictive strain at room temperature (300 K) using the indigenous optical Cantilever Beam Magnetometer (CBM). The film shows a high compressive magnetostrictive strain of ‒ 387 ppm and ‒ 708 ppm for in-plane and out-of-plane configurations, respectively. Considerably, the magnetostrictive strain loops (λ‒H) possess a certain degree of hysteresis with a symmetric butterfly shape. The origin of large compressive magnetostriction of CFO film is attributed to the non-180° domain wall motion followed by 90° domain rotation. The large values of saturation magnetostrictive strain make CFO film a suitable candidate in sensor design for different purposes.