The Stability of Model Human Coronaviruses on Textiles in the Environment and during Health Care Laundering

Synthetic textiles such as polyester could potentially act as fomites of human coronaviruses, indicating the importance of infection control procedures during handling of contaminated textiles prior to laundering. This study provides novel evidence that human coronaviruses can persist on textiles for up to 3 days and are readily transferred from polyester textile to other surfaces after 72 h of incubation.

Enhancing paper sludge dewatering by waste polyester fiber and FeCl3 for preparation of Fe-rich biochar

The paper sludge conditioning effects of waste polyester textile fibers as skeleton builders combined with ferric chloride (FeCl3) were evaluated and the sludge dewatering mechanism was explored. The catalytic effect of Fe-rich sludge biochar (Fe-SB) on enhancing sludge dewaterability was evaluated. Results showed the combined fiber-FeCl3 conditioning significantly promoted the sludge dewaterability compared with conditioner alone, leading to a 77.5% decrease in specific filtration resistance and a 68.9% increase in net yield. The decrease of extracellular polymeric substances (EPS) contents showed that the EPS were difficult to extract and sludge floc strength was enhanced as a result of chemical reactions such as complexation processes and charge neutralization. Hence, the enhancement of sludge dewaterability was primarily due to the sludge cake with a porous and incompressible structure formed by fiber and FeCl3, and the rigidity structure of fiber. Moreover, the Fe-SB prepared by fiber-FeCl3 conditioning sludge could effectively activate persulfate to enhance the sludge dewaterability, with water content of dewatered sludge decreasing by 14.6%. The Fe-SB had dual functions of the heterogeneous catalyst of persulfate and skeleton builder. This study presents a sludge recycling method that combined physicochemical conditioning and sludge biochar materials prepared by pyrolysis.

Analysis of Surface Properties of Ag and Ti Ion-Treated Medical Textiles by Metal Vapor Vacuum Arc Ion Implantation

The study focuses on the effects of Ag (silver) and Ti (titanium) ions on textiles by MEVVA (metal vapor vacuum arc) ion implantation. In order to comprehend this, the research was executed in three parts. In the first part, the antibacterial efficiencies of Ag and TiO2 were investigated in detail since the antibacterial capabilities of Ag and TiO2 are well known. A group of polyester- and cotton-based medical textiles were modified by Ag and TiO2 ions, with doses ranging from 5 × 1015 to 5 × 1016 ion/cm2. To determine the adhesion capabilities of the implanted ions on surfaces, after the first round of antibacterial tests, these medical textiles were washed 30 times, and then antibacterial tests were performed for the second time. The results were also compared with nanoparticle-treated medical textiles. In the second part, the corrosion and friction capabilities of Ag and Ti ion-implanted polyester textiles, with a dose of 5 × 1015 ion/cm2, were investigated. Finally, the UV protection capabilities of Ag and Ti ion-implanted polyester textiles, with a dose of 5 × 1015 ion/cm2, were investigated. The experiments showed that even after 30 washes, the TiO2 ion-implanted polyester textile had almost 85% antibacterial efficiency. In addition, Ti ion implantation reduced the friction coefficiency of a polyester textile by almost 50% when compared with an untreated textile. Finally, the Ag-ion-implanted polyester textile provided a UV protection factor of 30, which is classified as very good protection.