Preparation of Porous Poly(Lactic Acid)/Tricalcium Phosphate Composite Scaffolds for Tissue Engineering

The development of bioactive and composite materials for tissue engineering applications is being investigated worldwide. Many approaches have been published by including combinations of resorbable polymers with hydroxyapatite (HA), tricalcium phosphate (TCP), bioactive glasses and glass-ceramics in different scaffolds architectures. Taking into account these antecedents, porous polylactic acid (PLA)/TCP composites were fabricated by employing dissolution-leaching technic from PLA/chloroform solution (10, 15, and 20 wt % of TCP). Composite scaffolds exhibited porosity values 1.3 times higher when compared to PLA foams. Their bioactive response of the composite foams after immersion in a simulated body fluid (SBF) was studied by X-Ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FTIR-ATR). By XRD analysis, diffraction peaks attributed to hydroxyapatite deposition were observed; and by FTIR-ATR, new absorption bands corresponding to HA were detected. Regarding mechanical properties, an increasing tendency on elastic Young's modulus values was observed at higher TCP concentrations. These results envision the feasibility of using these composites as precursors for bone tissue materials engineering.

Biodegradable metals for bone fracture repair in animal models: a systematic review

Biodegradable metals hold promises for bone fracture repair. Their clinical translation requires pre-clinical evaluations including animal studies, which demonstrate the safety and performance of such materials prior to clinical trials. This evidence-based study investigates and analyzes the performance of bone fractures repair as well as degradation properties of biodegradable metals in animal models. Data were carefully collected after identification of population, interventions, comparisons, outcomes and study design, as well as inclusion criteria combining biodegradable metals and animal study. Twelve publications on pure Mg, Mg alloys and Zn alloys were finally included and reviewed after extraction from a collected database of 2122 publications. Compared to controls of traditional non-degradable metals or resorbable polymers, biodegradable metals showed mixed or contradictory outcomes of fracture repair and degradation in animal models. Although quantitative meta-analysis cannot be conducted because of the data heterogeneity, this systematic review revealed that the quality of evidence for biodegradable metals to repair bone fractures in animal models is ‘very low’. Recommendations to standardize the animal studies of biodegradable metals were proposed. Evidence-based biomaterials research could help to both identify reliable scientific evidence and ensure future clinical translation of biodegradable metals for bone fracture repair.

Bioresorbable Polymeric Scaffold in Cardiovascular Applications

Advances in material science and innovative medical technologies have allowed the development of less invasive interventional procedures for deploying implant devices, including scaffolds for cardiac tissue engineering. Biodegradable materials (e.g., resorbable polymers) are employed in devices that are only needed for a transient period. In the case of coronary stents, the device is only required for 6–8 months before positive remodelling takes place. Hence, biodegradable polymeric stents have been considered to promote this positive remodelling and eliminate the issue of permanent caging of the vessel. In tissue engineering, the role of the scaffold is to support favourable cell-scaffold interaction to stimulate formation of functional tissue. The ideal outcome is for the cells to produce their own extracellular matrix over time and eventually replace the implanted scaffold or tissue engineered construct. Synthetic biodegradable polymers are the favoured candidates as scaffolds, because their degradation rates can be manipulated over a broad time scale, and they may be functionalised easily. This review presents an overview of coronary heart disease, the limitations of current interventions and how biomaterials can be used to potentially circumvent these shortcomings in bioresorbable stents, vascular grafts and cardiac patches. The material specifications, type of polymers used, current progress and future challenges for each application will be discussed in this manuscript.

Biomimetic Biomolecules in Next Generation Xeno-Hybrid Bone Graft Material Show Enhanced In Vitro Bone Cells Response

Bone defects resulting from trauma, disease, surgery or congenital malformations are a significant health problem worldwide. Consequently, bone is the second most transplanted tissue just after blood. Although bone grafts (BGs) have been used for decades to improve bone repairs, none of the currently available BGs possesses all the desirable characteristics. One way to overcome such limitations is to introduce the feature of controlled release of active bone-promoting biomolecules: however, the administration of, e.g., recombinant Bone morphogenetic proteins (BMPs) have been used in concentrations overshooting physiologically occurring concentrations and has thus raised concerns as documented side effects were recorded. Secondly, most such biomolecules are very sensitive to organic solvents and this hinders their use. Here, we present a novel xeno-hybrid bone graft, SmartBonePep®, with a new type of biomolecule (i.e., intrinsically disordered proteins, IDPs) that is both resistant to processing with organic solvent and both triggers bone cells proliferation and differentiation. SmartBonePep® is an advanced and improved modification of SmartBone®, which is a bone substitute produced by combining naturally-derived mineral bone structures with resorbable polymers and collagen fragments. Not only have we demonstrated that Intrinsically Disordered Proteins (IDPs) can be successfully and safely loaded onto a SmartBonePep®, withstanding the hefty manufacturing processes, but also made them bioavailable in a tuneable manner and proved that these biomolecules are a robust and resilient biomolecule family, being a better candidate with respect to other biomolecules for effectively producing the next generation bone grafts. Most other biomolecules which enhances bone formation, e.g., BMP, would not have tolerated the organic solvent used to produce SmartBonePep®.

Photopolymerizable Resins for 3D-Printing Solid-Cured Tissue Engineered Implants

With the advent of inexpensive and highly accurate 3D printing devices, a tremendous flurry of research activity has been unleashed into new resorbable, polymeric materials that can be printed using three approaches: hydrogels for bioprinting and bioplotting, sintered polymer powders, and solid cured (photocrosslinked) resins. Additionally, there is a race to understand the role of extracellular matrix components and cell signalling molecules and to fashion ways to incorporate these materials into resorbable implants. These chimeric materials along with microfluidic devices to study organs or create labs on chips, are all receiving intense attention despite the limited number of polymer systems that can accommodate the biofabrication processes necessary to render these constructs. Perhaps most telling is the limited number of photo-crosslinkable, resorbable polymers and fabrication additives (e.g., photoinitiators, solvents, dyes, dispersants, emulsifiers, or bioactive molecules such as micro-RNAs, peptides, proteins, exosomes, micelles, or ceramic crystals) available to create resins that have been validated as biocompatible. Advances are needed to manipulate 4D properties of 3D printed scaffolds such as pre-implantation cell culture, mechanical properties, resorption kinetics, drug delivery, scaffold surface functionalization, cell attachment, cell proliferation, cell maturation, or tissue remodelling; all of which are necessary for regenerative medicine applications along with expanding the small set of materials in clinical use. This manuscript presents a review of the foundation of the most common photopolymerizable resins for solidcured scaffolds and medical devices, namely, polyethylene glycol (PEG), poly(D, L-lactide) (PDLLA), poly-ε-caprolactone (PCL), and poly(propylene fumarate) (PPF), along with methodological advances for 3D Printing tissue engineered implants (e.g., via stereolithography [SLA], continuous Digital Light Processing [cDLP], and Liquid Crystal Display [LCD]).