Cytotoxic Effects of Bulk-Fill Composites on L929 Fibroblast Cells

Objective: Unlike traditional composite resins, bulk-fill composite resins could be polymerized as thicker layers. This study aims to contribute to the field by investigating the cytotoxic effects of various bulk-fill composite resins on L929 mouse fibroblast cells in vitro. Material and Methods: In our study, six bulk fill and one conventional composite resin were used. Composite resin samples (8×4 mm) were prepared in a sterile cabinet by using a glass mod and polymerizing with a led light device (DTE LUX E, Germany). Composite samples (n:3) of which surface area was calculated according to ISO 10993-12: 2012 standards (3 cm2/ml), were kept in media for 24 h and 72 h in 37 oC incubator, their extracts were filtered in 1:1 and 1:2 proportion and were added on L929 mouse fibroblast cells. Cell viability was examined by the MTT assay and cell death by the LDH test. Cell viability results were evaluated using one-way analysis of variance (ANOVA) test (p<0.05). Results: When the 1:1 extracts from 4 mm thick bulk-fill composite samples were applied on L929 mouse fibroblast cells, cell viability rates showed significant differences compared to the control group at the end of 24 h and 72 h (except for Estelite Bulk Fill Flow). Although the extracts of the tested composite samples at 1:1 and 1:2 ratio at the end of 72 hours caused a decrease in L929 mouse fibroblast cell viability, the cell viability rate of only PRG-containing bulk fill composite and conventional composite remained below the cell viability ratio (70%) specified in ISO standards. Bulk fill composites did not produce toxic effects (except Beautifil Bulk Restorative) according to the LDH test. Conclusions: Despite decreasing in general the cell viability, bulk-fill composite resins used in 4 mm thick layers provided cell viability rates over the acceptability level, except PRG-containing bulk fill composite (Beautifil Bulk Restorative), which was cytotoxic to L929 mouse fibroblasts. Keywords Bulk fill composite; Cytotoxicity; L929 cells; LDH assay.

Synthesis of the Macrolactone Cores of Maltepolides via a Diene–Ene Ring-Closing Metathesis Strategy

Synthesis of the C19-truncated maltepolide E has been accomplished via a diene–ene RCM strategy without damage to the C11–C14 alkenyl epoxy unit. Upon release of the C17-OH group, it attacked at the C14 position with double bond migration and epoxide ring-opening to furnish the C19-truncated maltepolide A and B as proposed for the biosynthesis of maltepolides. Preliminary cytotoxicity data of the synthesized C19-truncated maltepolides against L929 mouse fibroblast cell line suggest irrelevance of the vinyl epoxide and importance of the conjugated dienyl keto unit for the observed anticancer activity.

A nano chitosan membrane barrier prepared via Nanospider technology with non-toxic solvent for peritoneal adhesions’ prevention

Peritoneal adhesion is one of the most common postsurgical complications and can cause bowel obstruction, pelvic pain, and infertility. Setting up a physical barrier directly between the injured site and surrounding tissues is an effective solution for preventing this adverse situation. This study investigated a chitosan electrospun membrane (CSEM) as a potent anti-adhesion barrier, which was prepared by a needleless technology called Nanospider. Scanning electron microscopy revealed that CSEM is a laminated nanofiber with good mechanical properties. The fiber is uniform with the diameter distributing in the range of 100–120 nm. The tensile strength can reach 27.45 ± 6.30 MPa with a maximum elongation at break of 18.50 ± 1.44%, which makes it stick easily to damaged parts but not to be easily damaged by tissue friction. The growth of S. aureus on CSEM was 59.18% lower than the control at 10 h, which indicates its better antibacterial property. In addition, CSEM has good coagulant and biocompatibility characteristics. It can perform hemostatic function within 10 min and the L929 mouse fibroblast viability on it was 92.18% ± 1.08% on the seventh day. In vivo experiments indicated that CSEM significantly prevented peritoneal adhesions within four weeks after surgery with wound surface coverage. These results indicate that CSEM is a promising anti-adhesion barrier material.

A new series of 2,4-thiazolidinediones endowed with potent aldose reductase inhibitory activity

In an effort to identify potent aldose reductase (AR) inhibitors, 5-(arylidene)thiazolidine-2,4-diones (1–8), which were prepared by the solvent-free reaction of 2,4-thiazolidinedione with aromatic aldehydes in the presence of urea, were examined for their in vitro AR inhibitory activities and cytotoxicity. 5-(2-Hydroxy-3-methylbenzylidene)thiazolidine-2,4-dione (3) was the most potent AR inhibitor in this series, exerting uncompetitive inhibition with a K i value of 0.445 ± 0.013 µM. The IC50 value of compound 3 for L929 mouse fibroblast cells was determined as 8.9 ± 0.66 µM, pointing out its safety as an AR inhibitor. Molecular docking studies suggested that compound 3 exhibited good affinity to the binding site of AR (PDB ID: 4JIR). Based upon in silico absorption, distribution, metabolism, and excretion data, the compound is predicted to have favorable pharmacokinetic features. Taking into account the in silico and in vitro data, compound 3 stands out as a potential orally bioavailable AR inhibitor for the management of diabetic complications as well as nondiabetic diseases.

Effects of Morphology, Concentration and Contact Duration of Carbon-Based Nanoparticles on Cytotoxicity of L929 Cells

Study of nanomaterials and their characteristics have added a new dimension to the rapid development of nanotechnology. Carbon-based nanomaterials are considered to be one of the key elements in nanotechnology since they are known to exhibit a variety of unusual properties which make them beneficial in the field of medicine and bioengineering. Nanoparticles, because of their size are capable of entering the human body by different modes and can spread to different parts by physical translocation or chemical clearance processes and hence requires a thorough understanding of their interaction with biological molecules, sub-cellular units, cells, tissues, and organs. Cytotoxicity of four types of carbon based nanomaterials — Carbon Nanowire (CNW), Carbon Nanotubes (CNTs), Graphene and Fullerene, on L929 mouse fibroblast cancerous cells is evaluated by MTT Assay. An analysis based on morphology, concentration and contact duration is discussed in this paper. Graphene was the most toxic material with an average toxicity of 52.24%, followed by CNTs, Fullerene and CNW. The differences in the toxicity levels has been attributed to different structural arrangements and aspect ratio. Lower concentration levels exhibited lower levels of cytotoxicity in three of the four nanomaterials but contact duration failed to show any fixed trend.

New sesquiterpene hydroquinones from the Caribbean sponge Aka coralliphagum

Four new sulfated sesquiterpene hydroquinones siphonodictyals E1–E4 (1–4) and cyclosiphonodictyol A (5) were isolated from a sample of the Caribbean sponge Aka coralliphagum collected off the coast of San Salvador in the Bahamas. The structures of the new compounds were elucidated on the basis of mass spectrometric and NMR spectroscopic analysis. Compounds 1–4 are derivatives of siphonodictyal E (9). Siphonodictyal E4 (4) exhibited mild antiproliferation activity against L929 mouse fibroblast, KB-31 epidermoid carcinoma, and MCF-7 breast cancer cell lines, while siphondictyal E3 (3) and cyclosiphonodictyol A (5) showed moderate activity against Gram-positive bacteria.