Transport Reagents through the Pore Structure of a Membrane Catalyst under Isothermal and Non-Isothermal Conditions

The article presents the results of an experimental comparison of methane transport in the pore structure of a membrane catalyst under isothermal and non-isothermal Knudsen diffusion conditions. It is shown that under the conditions of non-isothermal Knudsen diffusion in the pore structure of the membrane catalyst, there is a coupling of dry reforming of the methane (DRM) and gas transport, which leads to the intensification of this process. The reasons for the intensification are changes in the mechanism of gas transport, an increase in the rate of mass transfer, and changes in the mechanism of some stages of the DRM. The specific rate constant of the methane dissociation reaction on a membrane catalyst turned out to be an order of magnitude (40 times) higher than this value on a traditional (powder) catalyst.

Understanding interfaces’ functions and modifications in membrane electrode assembly of proton exchange membrane fuel cells

Interfaces in membrane electrode assembly (MEA) refer to the contacting region between two neighboring layers, and on both anodic and cathodic side, there are the proton exchange membrane/ catalyst layer...

Catalytic hydrogenation of n-butene with nanosized Pt/NBCNT hybrid membranes reinforced with bacterial cellulose

One of the main challenges in the field of heterogeneous catalysis is the involvement of thin solid films and membranes and their application in flow systems. In this regard, we report here the application of self-supported bacterial cellulose (BC) reinforced nanosized platinum (Pt)/N-doped bamboo-like carbon nanotube (NBCNT) hybrid catalyst membrane with a thickness of 35 ± 5 µm in the hydrogenation of n-butene. To synthetized the BC-NBCNT/Pt nanohybrid membrane catalyst a simple impregnation route was applied in a two-step process. As-prepared material was tested in a continuous flow system and the conversion was followed directly by using Fourier transform infrared spectroscopy. Furthermore, the fabricated films were characterized by scanning electron microscopy, X-ray diffraction, energy-dispersive X-ray spectroscopy and specific surface area measurement (Brunauer–Emmett–Teller). Hydrogenation performance was studied on both single and double films. Results revealed that 97% conversion of n-butene can be achieved using these bacterial cellulose reinforced hybrid membranes. Graphic abstract